• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.404-406
• /
• 2012

계선표지는 특수목적항로표지의 하나로 해양경찰에서는 "연안해역 거점감시를 위하여 해양경찰청 소속의 경비함정의 계선을 목적으로 설치하는 부표"라고 정의한다. 현재 덕적도 외 33기의 계류부표를 해양경찰에서 운영하고 있으며, 150ton 이하의 소형해경함정을 계류시키는데 사용하고 있다. 그러나 부표의 유지관리가 어려워 관리자에게 감시업무 이외에 과중한 업무가 부가되고, 부표의 철탑구조물의 형태로 인해 작업 중 안전사고가 많이 발생하고 있다. 또한 표체가 철재로 이루어져 있어 해경함정 계류시 부표 및 함정의 충돌에 의한 손상이 발생하여 유실되거나 침몰하는 경우도 있다. 이 논문에서는 현재 해양경찰 계류부표를 기준으로 하여 현재 소형선박을 위한 계류부표 분석 및 최적화된 계류부표 설계하고자 한다. 국외 특수용도 사용부표 사례 분석 및 현재 관리자의 해양경찰의 의견을 수렴을 통해 현재 계류부표의 운영현황 및 관리 실태를 분석하고 최적화된 새로운 계류부표의 기본설계를 제시한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.211-212
• /
• 2010

하역장치가 장착된 모바일하버 선박은 새로운 해상운송시스템 개념으로, 임시정박지에서 대형 컨테이너 선박에 계류하여 해상상태 3 이하 조건에서 선박간 해상계류 상태에서 신속하면서 효율적인 컨테이너 하역작업을 수행하는 것이다. 모바일하버와 관련한 주요 연구로는 고속하역시스템, 부유체 구조 설계, 안벽하역시스템 해석 및 작업크레인 설계 둥의 원천 기술 개발을 중심으로 수행되었다. 본 연구는 모바일하버 선박의 하역작업 중 동척 안전성 확보를 위한 계류안정화시스템을 개발하고자 하는 것으로, 국내외 계류장치에 대한 현황 분석을 기초로 현재 선박에 탑재되어 있는 의장장치인 윈치시스템에 계류안정화 기능을 추가시킨 포지셔녕 윈치를 개발하여 모선과의 상대운동을 최소화하는 방안에 대한 개념 설계를 제안한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.233-235
• /
• 2022

43차 산업혁명이 도래함에 따라 해운분야에도 자동화 및 무인화 기술을 접목한 안정성과 효율성을 향상시키기 위한 기술개발이 진행중이다. 그중 선박의 신속하고 안전한 이/접안을 돕도록 고안된 자동계류시스템은 선박의 식별 정보와 융합센서로부터 다양한 정보를 수집해 인력의 개입이 최소화하거나 무인화할 수 있으며, 이는 계류 라인을 이용한 기존 방법 대비 발생하는 위험 요소를 줄이고 효율적인 도선 지원이 가능하게 한다. 본 연구팀은 기초단계 연구로서 자율 운항 선박 구현을 위한 자동 계류 시스템 개념 설계를 제시한다. 연구내용은 크게 자동 계류시스템의 하드웨어 설계, 제어 및 운용 프로세스 설계, 선체 계측 기술 개발, 운동변위/계류력 산정 수치모델 개발, 항만 내 운영환경 및 시나리오 분석으로 분류할 수 있으며 본 발표에서는 연구현황과 추후 진행 방향에 대해 다루도록 한다.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.41-47
• /
• 2018

The buoy-enabled underwater surveillance system is a device that is installed in a particular sea area and operated for a certain period of tine and moved to another sea area after recovery. In this paper, a mooring method which is applied for a buoy-enabled underwater surveillance system was selected to maintain installation and enure stable operation. Also, the structure of the mooring line was designed. Two-point mooring method was selected considering interference with the communication cable of array-assembly. The composite structure of buoy chain, nylon rope, and anchor chain is designed as the basic component of mooring line. For the verification of design, a numerical simulation and wave tank experiment were performed. Their results were confirmed similarity in test condition. Finally, the mooring lines were designed for the environment of the sea trial location. The mooring line produced by the final design confirmed the stability above the significant wave height considered in the design on the sea trial.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.130-133
• /
• 2019

수중(submerged)에 부유(floating)식으로 계류되는 거주목적의 구조체 설계(design basis) 관련 연구로서 계류안정성 모델(수중가옥)을 만들고 거동을 정수압적 유체역학적으로 수치분석한다. 임의 가정한 수중가옥의 1)배수량 규모 2) 함체형상에 따른 환경압 하에서의 계류안정성을 a)부력중심, b)무게중심과 가변하중의 변위에 따른 c)함체 기울기를 MATLAB프로그램을 이용하여 산정한다. 나아가 수중가옥의 동적(hydrodynamic) 계류안정성을 임의 시공 장소인 독도의 기상청 울릉도-독도 부이 최근 관측치를 근거로 OrcaFlex프로그램을 이용하여 분석하므로써 수중가옥의 수중건축 시공간상 계류안정성 설계요건(design basis)을 구체화 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.248-253
• /
• 2023

Most offshore platforms utilize chain mooring systems for position keeping. However, information regarding related design modification processes is scarce in literature. This study focuses on the floating liquefied natural gas (LNG) bunkering terminal (FLBT) as the target of shore platform and analyzes the corresponding initial mooring design and model tests via numerical simulations. Subsequently, based on the modified design conditions, a new mooring system design is proposed. Adjusting the main direction of the mooring line bundle according to the dominant environmental direction is found to significantly reduce the mooring design load. Even turret-moored offshore platforms are exposed to beam sea conditions, leading to high mooring tension due to motions in beam sea conditions. Collinear environmental conditions cannot be considered as design conditions. Mooring design loads occur under complex conditions of wind, waves, and currents in different environmental directions. Therefore, it is essential appropriately assign the roll damping coefficients during mooring analysis because the roll has a significant effect on mooring tension.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.105-111
• /
• 2006

Dolphin mooring system can be a good candidate for the VLFS fastening system in view point of strength and effectiveness. In the design process of the dolphin system, precise calculation of the wave forces and the subsequent selecting the proper number of the piles adopted are one of the main factors. In this paper, one of the design process of the dolphin system is investigated and a proper configuration of the system is derived based on the structural characteristics of the system that was obtained through the structural analysis of the basic pile element confronted to the external loadings including wave impact load. It was found that lot the better design of ihe mooring system for VLFS, mono pile mooring system is more recommendable in a specific condition than other multi piles mooring system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.129-136
• /
• 2016

Floating offshore structures keep its position by a mooring system against various kind of environmental loadings. For this reason, a reliable design of the mooring system is a key factor for initial design stage of a floating structure. However, there exists possibility of mooring failure, even the system is designed with enough safety margin, due to the unexpected extreme environmental conditions or long-term fatigue loadings. The breaking of one of the mooring lines may change the tension level of the other mooring lines, which can potentially result in a progressive failure of the entire structure. In this study, time domain numerical simulation of 10MW class wind-wave hybrid platform was carried out with partially broken mooring line. Overall platform responses and variations of the mooring line tension were numerically evaluated.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.47-55
• /
• 1990

This paper presents the quasi-static mooring analysis model for a vessel moored at the quay. The results of this analysis will aid the designer in determining the mooring configuration for the surface vessels subjected to wind, current and wave forces. And it will also help him in selecting the equipment for the fixed mooring system. The cumulative elastic behavior of the mooring lines invokes a complicated nonlinear problem since the mooring lines are relatively short and hang in air as noncoplanar configurations. This nonlinear mooring problem is solved in this paper by the load increment technique in which the external load is increased step by step taking all sources of nonlinearity into account.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.184-191
• /
• 2011

Preliminary design of a mooring system for a floating wave energy converter(WEC) is performed. A mooring line is designed to consist of two parts; the one is a chain in heavy weight laid on the seabed and linked to an anchor on the seabed and the other is a light weight chain suspended at a floater. A high weight chain laid on the seabed can contribute to mitigate dynamic energy propagated from top oscillation and decrease anchor weight and volume. Through a low weight chain suspended between a floater and seabed the WEC's function to produce energy from wave can be affected in minimum by the motion of a chain. The static and dynamic analyses for the designed mooring system were carried out to evaluate WEC system's safety. The present study shows that the designed gravity anchor moves horizontally due to the tension exerted on the anchor in the severe ocean environmental condition. The present mooring system should be redesigned to satisfy the safety requirements. The present study will be useful to predict the safety of the mooring system under ocean environment.