• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.269-271
• /
• 2006

Pyromellitic anhydride(PMDA)와 4,4-Oxydianiline(ODA)로부터 Polyimide의 전구체인 Poly(amic acid)(PAA)를 합성하고, 이를 열을 가하여 Polyimide되는 반응을 적외선 분광법을 이용하여 추적하였다. 이미드화 반응은 $175^{\circ}C$에서 1시간, $185^{\circ}C$에서 1시간, $195^{\circ}C$에서 1시간, $215^{\circ}C$에서 1시간, $235^{\circ}C$에서 1시간 경화시킴으로 완결됨을 확인하였다.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.92-97
• /
• 1998

열잠재성 경화제인 N-benzylpyrazinium hexafluoroantimonate (BPH)를 이용하여 함 량에 따른 DGEBA계 에폭시 수지의 경화반응에서의 유변학적 특서 및 반응속도를 연구하 였다. 경화시의 활성화 에너지를 Barrett 방법을 이용한 동적 DSC 측정방법으로 조사 하였 다. DSC 실험 결과 BPH의 함량이 증가할수록 활성화 에너지는 감소함을 알수 있었다. Rheomter를 이용하여 DGEBA/BPH 계의 유변학적 특성을 등온경화와 tdmdhsrud화 조건하 에서 살펴보았다. BPH의 함량이 증가함에 따라 겔화점 도달시간 빠르게 나타나는데 이는 낮아진 활성화 에너지에 기인한 것으로 사료된다. 두 번째 damping 피크를 이용하여 유리 화점을 측정하여 Time-Temperature-Transformation (T-T-T) cure diagram을 작성한 결 과 열잠재성 경화제의 특성인 일정온도 이상에서 활성이 나타남을 확인할수있었다.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.759-767
• /
• 1995

This paper examines the electrical properties according to a curing time and a corona degradation in epoxy composites which are used for transformers. To consider these phenomena, the electrets were formed by appling high voltages to five kinds of specimens designed according to a constant mixing rate and then TSC(Thermally Stimulated Current) values at the temperature range of -160-200[>$^{\circ}C$] were measured from a series of experiments. The behaviour of carrier and its possible origins in epoxy composites were studied. Various effects of curing time and electric field on epoxy composites were also investigated.

• Composites Research
• /
• v.30 no.3
• /
• pp.202-208
• /
• 2017

Resin transfer molding (RTM) is a mass production process that allows the fabrication of composites ranging in size from small to large. Recently, fast curing resins with a curing time of less than about 10 minutes have been used in the automotive and aerospace industries. The viscosity of resin is bound up with the degree of cure, and it can be changed rapidly in the fast-cure resin system during the mold filling process. Therefore, it is advantageous to experimentally measure and evaluate the degree of cure because it requires much effort to predict the flow characteristics and cure of the fast curing resin. DMA and dielectric technique are the typical methods to measure the degree of cure of composite materials. In this paper, the resin flow and degree of cure were measured through the multi-channel dielectric system. A total of 8 channels of dielectric sensors were used and resin flow and degree of cure were measured and compared with each other under various pressure conditions.

• Composites Research
• /
• v.37 no.1
• /
• pp.15-20
• /
• 2024

Since the residual stress of hydrogen tank is directly related to durability, it is very important to reduce it for safety. Type II~IV hydrogen tank are manufactured by the filament winding method, in which the fiber is impregnated with resin and wound around the liner. Residual stress in composite is affected by curing conditions and fiber tension etc. In this study, the effect of curing conditions on residual stress was analyzed when manufacturing a Type III hydrogen tank using carbon fiber filament winding process. First, the curing behavior of the epoxy resin was analyzed using a differential scanning calorimetry. Through this, the curing temperature was set to 140℃. During the same curing time, the specimens were cured under 2-stage curing condition that reached 140℃ earlier and a 4-stage curing condition that reached 140℃ later, respectively. After curing, the residual stress of the composite material was measured by the ring slitting method, and the experimental values were compared with numerical values. It was confirmed that there was a significant difference in residual stress according to the optimization of curing conditions.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.207-211
• /
• 2002

항균 활성도는 Root canal sealer가 갖추어야 할 필수요소 중 하나이다. 본 연구는 최근 임상술식에 사용되고 있는 8종의 root canal sealer의 근관내 혐기성 세균에 대한 항균효과를 알아보기 위해 시행되었다. 또한 본 연구에서는 혼합직후의 경화되지 않은 sealer와 경화 7일 후 sealer의 항균효과도 비교하였다. 항균효과 측정을 위해 사용된 균주는 최근 실패한 근관치료 증례에서 배양되어 보고된 바 있는 Enterococcus faecalis와 근관내 주요 감염균인 그램음성 혐기성세균인 Staphylococcus aureus를 대상으로 하였고, Agar diffusion test 방법을 사용하였다. 실험방법으로는 2개의 paper disk에 신선하게 혼합한 각각의 sealer를 도포하여 한개의 disk는 즉시 실험에 사용하고 다른 한개의 disk는 일주일간 혐기성 배양기에서 경화시킨 다음 사용한다 각각의 균주를 Brucellar blood agar plate에 접종한 다음, sealer가 도포된 paper disk를 plate상에 올려놓는다. 대조군으로는 식염수에 침윤시킨 disc를 같은 방법으로 각 실험단계에 사용한다. 각 plate를 혐기성 배양기에서 48시간동안 배양한 뒤 실험에 사용한 sealer의 항균효과를 6mm paper-disk를 둘러싼 inhibition zone을 측정하여 평가한다. Fisher's PLSD분석방법 결과 E. faecalis에 대하여 경화 전과 후의 AH26모두 경화 전과 후의 Roth 801, Dentalis, Apexit, AH Plus, RSA그리고 경화 후의 MCS보다 유의성 있게 강한 항균효과를 나타내는 것으로 보고되었으며. 경화 후의 AH26은 경화 전의 AH 26, 경화 전의 Ketac Endo, 경화 전의 MCS보다 통계학적으로 유의성이 있는 항균작용을 하는 것이 관찰되었다 (p＜0.05). 경화 후 Roth 801, 경화전과 후의 Dentalis, AH plus, Apexit, RSA는 E. faecalis에 대한 항균효과를 나타내지 못하였다. S. aureus에 대하여 경화후의 AH26이 경화 전과 후의 Roth 801, Apexit, AH Plus, RSA보다 유의성있는 항균효과를 보이는 것을 발견 할 수 있었고, 경화 전의 AH 26이 경화 후의 AH plus보다 나은 항균효과를 나타냄을 알 수 있었다. 또, 경화 전과 후의 Apexit, 경화 후의 AH Plus, 경화 전과 후의 RSA에서는 S. aureus에 대한 항균작용이 발견되지 않았다. 본 실험의 결과 AH26이 가장 강한 항균 작용을 갖는 것을 알 수 있었으며, 각 sealer의 경화 전과 후의 항균효과는 AH26이 경화 전보다 경화 후에서 더 강한 항균효과를 나타내는 것 이외에는 효과의 차이가 없었다.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.224-230
• /
• 2012

In this paper, flame-resisting PMMA(polymethyl methacrylate) sheet was manufactured and its characteristics were tested. PMMA was synthesized by bulk polymerization of a monomer methyl methacrylate with addition of phosphorous flame retardant, triethyl phosphate and ethylene glycol dimethacrylate as a cross linking agent. PMMA sheet was manufactured by using the cell molding method, which does not alter or affect the existing property of PMMA. Then the characteristics of PMMA sheet were tested for the TEP content, the content and curing time of EGDMA. As TEP content increases, the length of carbonization lessens and the amount of char production increases. As a result, it strengthened the effect of flame retardants. But the hardness of the sheet decreased as TEP content increased. However, hardness increased when EGDMA was added up to 3 wt% while curing time was decreased from 3 hours to 2 hours. There was no change of hardness when more than 3 wt% of EGDMA was used.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.72-81
• /
• 2000

Benzoic acid polyester/lactone polyol were synthesized by polycaprolactone 0201 as diol, trimethylolpropane as triol, adipic acid as dibasic acid, and benzoic acid as monobasic acid. Polyisocyanate prepolymer Desmodur N-100 of HDI-biuret type was used in this study. Two-component polyurethane coatings were prepared by blending benzoic acid polyester/polycaprolactone, polyisocyanate, wetting/dispersing agent, white pigment, and flowing agent. Various properties were examined on the film coated with the prepared polyurethane. They showed excellent physical properties such as abrasion resistance, accelerated weathering resistance, and yellowness index. They also showed good physical properties such as flexibility, impact resistance, 60$^{\circ}$ specular gloss, cross hatch adhesion, hydrocarbon resistance, and lightness index difference. Hardness of coating showed a little poor character. The introduction of polycaprolactone 0201 as diol in the polyurethane coatings improved the hydrocarbon resistance, impact resistance, and flexibility of coatings. According to the drying and curing behavior with the contents of benzoic acid, they seem to have reasonable coating properties such as drying time of 2 to 4 hours and pot-life time of 20 to 37 hours.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.21-25
• /
• 1979

To evaluate the possibility of hardening of rice seedlings to chilling injury by low temperature conditioning for improvement of nursery temperature management a chilling sensitive new variety Tongil from Indica \times Japonica cross and a chilling tolerant Japonica variety Jinheung were reared by the 3rd leaf-stage in a day $30^{\circ}C/night\; 20^{\circ}C$ growth chamber, and were subjected to temperature conditioning for hardening against chilling injury for 6 days. Then the seedlings conditioned and unconditioned were chilled in a day and night $8^{\circ}C$ chamber for 2, 4, 6, or 8 days long and returned to the day and night $30^{\circ}C/night\; 20^{\circ}C$ condition for development of chilling injuries. Survival rate after chilling injury development of the variety Tongil showed distinct effect of hardening, i. e. the unhardened-25 % survival, the hardened by a gradual drop of temperature regime $(30^{\circ}C/20^{\circ}C\rightarrow24^{\circ}C/14^{\circ}C\rightarrow18^{\circ}C/12^{\circ}C\rightarrow8^{\circ}C)4 -59% survival and the hardened. by repeated brief exposure (4hrs. to 6hrs.) to $8^{\circ}C$ shock-89% survival against chilling of $8^{\circ}C$ for 4 days long. The variety Jinheung survived even against 8 days chilling at $8^{\circ}C$ C, but the discoloration rate of leaves due to chilling showed noticeably the hardening effect as repeated shock was much better than the gradually lowering temperatures.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.229-237
• /
• 1991

Vinylester was syntheszed in the presence of amine and metal catalysts, such as triethylamine(TEA), triethylbenzyl ammonium chloride (TEBAC), cetyltrimethyl ammonium bromide (CTMAB), chromium acety] acetate (CAA), and triphenylantimony (TPA). Apropriate use of amine and organometal catalysts were 1.7~2.2 % (Wt. %), 2.5~3.1 % (Wt %) of charged methacrylic acid (MAA) in respect of reactivity, gel-time, and storage stability. The Order of reactivity was TEA>TEBAC>CTMAB>CAA>TPA. Temperature independence of catalyst showed more large deviation above $110^{\circ}C$. Storage stability could be improved without delay of gel-time by adding TPA in 2.0 % (Wt %) of charged MAA after synthesis.