• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.139-147
• /
• 2008

DVB-S2 (Digital Video Broadcasting-Satellite, Version 2) system transmits frames which adapt their structures based on the channel conditions, thus requiring simultaneous detection of the start of the Same (SoF) and the frame structure at the initial acquisition stage of the receiver. Also, a very low value of the minimum operating signal-to-noise ratio (SNR) for the acquisition necessitates a method utilizing multiple received frames to meet the required performance. In this paper, performance of joint time synchronization and frame structure detection methods using multiple DVB-S2 frames is evaluated by deriving the detection error probability. In particular, we evaluate the performance and complexity variations when the soft- and hard-decision values of the signal correlation output are used, present the synchronization parameters to optimize the performance, and verify the analysis results via computer simulations.

• Journal of the Korean Institute of Gas
• /
• v.11 no.2 s.35
• /
• pp.55-59
• /
• 2007

This paper presents the strength safety of a LPG cylinder, which is fabricated by a steel sheet forming and a welding technology. The strength safety of a cylinder is guaranteed by analyzing a stress distribution of a LPG cylinder structure using a finite element method. The FEM computed results indicate that the hydraulic test gas pressure of $31kg/cm^2$ generates a concentrated local stress near the upper round end plate, which exceeds the yield strength of a LPG cylinder. Thus, the current hydraulic test pressure may be rechecked and revised because this pressure increases the fatigue failure and decreases the lift of the pressure vessel. The normal operation and sealing gas pressures such as $9kg/cm^2\;and\;18.6kg/cm^2$ are relatively safe for a steel LPG cylinder.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.46-50
• /
• 2019

In this study, the strength stability of an LPG mini tank with a storage capacity of about 250 kg was analyzed by FEM. According to the results of the FEM analysis, it is preferable that the corner radius of the LPG mini tank having a storage capacity of 250 kg is designed to be 175 to 205 mm. Generally, the larger the corner radius of the end plate of the gas storage tank, the higher the safety of the strength, but the volume or capacity of the tank is reduced. Therefore, it is important to derive the optimum design data. Further, in order to securely design the strength of the gas tank, the thickness of the tank is designed to be thick. However, when the thick steel sheet is used, the material and the transportation costs are increased. The result shows that it is preferable to select the optimum thickness of the steel sheet from 4.5 to 5.5 mm. Using the level gauge type of column on the central axis of the gas tank, the safety strength of the LPG tank can be enhanced as much as twice, compared with the tank of the existing level gauge to measure the liquid level by piercing the side wall of the tank.

• Clinical and Experimental Pediatrics
• /
• v.49 no.6
• /
• pp.635-642
• /
• 2006

Purpose : The purpose of this study is to determine whether the new pulmonary valve reconstruction technique prevents short-term postoperative pulmonary regurgitation and improves early and mid-term clinical outcome. Methods : We reviewed postoperative echocardiographic variables and chest X-ray films from 31 patients who had undergone valve reconstruction(pulmonary valve reconstruction group : PVR) for the repair of TOF between April 2000 and August 2004. We compared the clinical data of these patients with those from 47 patients who had right ventricular outflow tract reconstruction with a monocusp valve(monocusp ventricular outflow patch group : MVOP) and 22 patients who had a transannular patch repair without a monocusp valve(transannular patch group : TAP). Results : In the PVR group, 25 patients(81 percent) had trivial or mild pulmonary regurgitation in their early post operative echocardiogram. Only 12 patients(26 percent) in the MVOP group had mild pulmonary regurgitation; and no patient in the TAP group had it. Pulmonary valve function was good in 96 percent of the PVR group, 36 percent of the MVOP group, and none in the TAP group in early post-operative echocardiogram. Follow-up echocardiogram(1, 2, 3, 4 years later) of the MVOP and TAP groups showed moderate pulmonary regurgitation and severely decreased valve function in almost all cases. However, in the PVR group 54 percent(16/28), 50 percent(14/28), 37 percent(9/24), and 31 percent(5/16) of the patients had trivial or mild pulmonary regurgitation 1, 2, 3 and 4 years after operation, respectively. The valve function remained good in 80 percent(24/30), 64 percent(18/28), 57 percent(12/21), and 31 percent(5/16) of the patients 1, 2, 3 and 4 years after operation respectively. Conclusion : Pulmonary valve reconstruction is effective in reducing pulmonary regurgitation and right ventricular dilatation in the repair of TOF, even though regurgitation increases with time. Further study is needed to determine long-term results.

• Journal of the Korean Society of Costume
• /
• v.26
• /
• pp.221-232
• /
• 1995

It was aimed to study the costume of Koryo dynasty based upon the one hundred and thirty four pictures of the engraved painting on the wood. The costume to study were made about 400 years during the King Mok-jong(1006) to the forth year of the king Wu based upon the Avatamaka Sutra and Pulsul-Yaesu 가) Men's wear 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots. 2. Clothes : 1) King wore an uniform of Mien-lu Kuan system. 2) The Crown Prince and high rank officials wore Yuan-yu-Kuan Won-jung-po-ju-Kuan, Sa-bang-Kuan, Yun-wha-Kuan and montain shape Po-ju-Kuan as a court dress. 3) Officials put on the Pok-du as an official dress and Won-jung-ip-mo, Kun and Mo as an everyday dress, the monk put on the diamond shape Do-kuan and Du-kun and the soldier put on the Helmet. Costume system of man was as follows ; They wore exchanged shape collar, big sleeve jacket, long skirt, apron, hanging precious stone big belt as a Mien-pok. 4) The soldiers wore helmet, Keun-Kap, Scarf, Pee-Bak, Hung-Kap, Pok-Kap, Yang-Dang-Kap, We-Yo-Kap, Kum-Kap, and caries arms. Lower-level officials wore Pe-Bal, Kun-Mo, gae, won-leung, very small sleve jacket, a long coat reaching up to the knee length, slacks, belt, loin cloth and apron. 5) Children's bind their hair up angle shape and wore a half long jacket raching up to the hip and slacks. 나) Women's wear; 1. hair style and hair dress; 1) High rank women's hair style was very extravaganceful. They made their hair top knot (one, two, or more knots) and decoraed precious stone, pan shape head dress, wheel shape head dress, and flower shape precious stone decorated head dress. 2. Clothes ; 1) High rank ladi's wore Kun-Kyun attached jacket, and jacket sleeves decorated pleats, and pleats decorated long skirt, apron, back apron, knot belt, scarf, this type is the same with Dang Dynasty, five dynasty of china, Song, Kum, Won, Myung Dynasty, and our costume of Poe-hae, and Shilla Dyansty. 2) Official ladies wore exchange shape collor, big sleeve jacket, long pleats skirt, apron, and back apron, scarf. 3) Women wore top knot hair style and decorated by ribbons. Shoulder scarf attached small sleeve jacket and wore reaching up to the knee length. Side seam is open and under wear was long skirt. 4) High knot hair style and exchanged shape collor jacket, under wear wore long skirt. They wore under skirts and the jackets. 5) High knot hair style, exchange shape collor jacket reaching up to the knee length small sleeve under wear wore long skirt, belt. 6) High knot hair style, big sleeve jacket and long skirt. 7) Foot wear wore boots, mokasin type shoes, sandal.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.66-74
• /
• 2010

Recently distributed video coding (DVC) is spotlighted for the environment which has restriction in computing resource at encoder. Wyner-Ziv (WZ) coding is a representative scheme of DVC. The WZ encoder independently encodes key frame and WZ frame respectively by conventional intra coding and channel code. WZ decoder generates side information from reconstructed two key frames (t-1, t+1) based on temporal correlation. The side information is regarded as a noisy version of original WZ frame. Virtual channel noise can be removed by channel decoding process. So the performance of WZ coding greatly depends on the performance of channel code. Among existing channel codes, Turbo code and LDPC code have the most powerful error correction capability. These channel codes use stochastically iterative decoding process. However the iterative decoding process is quite time-consuming, so complexity of WZ decoder is considerably increased. Analysis of the complexity of LPDCA with real video data shows that the portion of complexity of LDPCA decoding is higher than 60% in total WZ decoding complexity. Using the HDA (Hard Decision Aided) method proposed in channel code area, channel decoding complexity can be much reduced. But considerable RD performance loss is possible according to different thresholds and its proper value is different for each sequence. In this paper, we propose an adaptive HDA method which sets up a proper threshold according to sequence. The proposed method shows about 62% and 32% of time saving, respectively in LDPCA and WZ decoding process, while RD performance is not that decreased.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.635-646
• /
• 2011

In distributed video coding, low complexity encoder can be realized by shifting encoder-side complex processes to decoder-side. However, not only motion estimation/compensation processes but also complex LDPC decoding process are imposed to the Wyner-Ziv decoder, therefore decoder-side complexity has been one important issue to improve. LDPC decoding process consists of numerous iterative decoding processes, therefore complexity increases as the number of iteration increases. This iterative LDPC decoding process accounts for more than 60% of whole WZ decoding complexity, therefore it can be said to be a main target for complexity reduction. Previously, HDA (Hard Decision Aided) method is introduced for fast LDPC decoding process. For currently received parity bits, HDA method certainly reduces the complexity of decoding process, however, LDPC decoding process is still performed even with insufficient amount of parity request which cannot lead to successful LDPC decoding. Therefore, we can further reduce complexity by avoiding the decoding process for insufficient parity bits. In this paper, therefore, a parity request estimation method is proposed using bit plane-wise correlation and temporal correlation. Joint usage of HDA method and the proposed method achieves about 72% of complexity reduction in LDPC decoding process, while rate distortion performance is degraded only by -0.0275 dB in BDPSNR.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.293-297
• /
• 2015

Underwater acoustic communications has been limited use for military purposes in the past. However, the fields of underwater applications expend to detection, submarine and communication in recent. The excessive multipath encountered in underwater acoustic communication channel is creating inter symbol interference, which is limiting factor to achieve a high data rate and bit error rate performance. To improve the performance of a received signal in underwater communication, many researchers have been studied for channel coding scheme with excellent performance at low SNR. In this paper, we applied BCJR decoder based ( 2,1,7 ) convolution codes and to compensate for the distorted data induced by the multipath, we applying the turbo equalization method. Through the underwater experiment on the Gyeungcheun lake located in Mungyeng city, we confirmed that turbo equalization structure of BCJR has better performance than hard decision and soft decision of Viterbi decoding. We also confirmed that the error rate of decoder input is less than error rate of $10^{-1}$, all the data is decoded. We achieved sucess rate of 83% through the experiment.

• Cross-Cultural Studies
• /
• v.44
• /
• pp.147-189
• /
• 2016

This study attempted to investigate the issue how stepmother's narrative was transferred to . For this agenda, the approach of this paper is described below to determine how Bbaengdeok's stepmother narrative was transferred episodically to . First, this paper started from the relation between stepmother narrative and affiliated with each root folk tale in Buddhist text. Among known as root folk tale until now, this paper investigated whether was the root folk tale affiliated to Buddhist literature. At that point, stepmother narrative showed relation with opening eyes motive. It has been reported that the text of opening eyes in Buddhist literature is originated from the south. This paper confirmed that 's stepmother narrative was related to Buddhist literature originated from south. Next, this paper investigated the background of opening eyes motive of stepmother types. After entering Gyeongpan , it formed Bbaengdeok narrative of Wanpan related to Literary geography of Jeollado enjoying space of Wanpan . There are two evidences for this. The first one is which was passed down around Jeollado. In the course of sudden Buddhist folklore's flow into the country, it is that combined stepmother narrative of sudden Buddhist literature with the characteristics of northern Buddhist literature which was reconstructed into son's filial behavior of northern Buddhist literature to make father's blinded eyes open. The other is the Buddhist trend of the late 18th Chosun when northern Buddhist literature and sudden Buddhist literature were combined. It appeared that stepmother narrative was formed in the Buddhist background of the late 18th Chosun when northern Buddhist literature and sudden Buddhist literature were combined.

• Journal of Chest Surgery
• /
• v.31 no.7
• /
• pp.679-683
• /
• 1998

From June 1995 to May 1997, we have implanted 52 Sorin Bicarbon mechanical valves in 41 patients. They were 16 men and 25 women, and their mean age was 47.4${\pm}$14.8(range; 18∼74 y.o.). 35(27 mm∼31 mm) were in mitral position, 15(19 mm∼25 mm) in aortic position, and 2(31 mm) in tricuspid position. 3 CABGs and a tumor excision were taken concomittantly. 35 patients were primary operation, and 6 were re-do operations. By intraoperative transesophageal doppler echocardiography, transvalvular peak/mean pressure gradient was 6.1${\pm}$2.7/2.4${\pm}$1.4 mmHg in mitral position and 27.6/10.7 mmHg in aortic position. The effective valve opening area in mitral position was 3.2${\pm}$0.6 cm2. Follow-up was total 508.6 patient-months, and mean follw-up was 12.7${\pm}$9.2 months. NYHA class was improved from 2.6${\pm}$0.6 to 1.2${\pm}$0.3 in average postoperatively. During that period, there was no operative death. 2 late non-valve related deaths were occurred. One was died of COPD, and the other was possible acute myocardial infarction. Among 7 postoperative complications, one valve related complication(minimal paravalvular leakage) was noticed. In conclusion, Sorin Bicarbon mechanical valve is believed one of the safe choice in clinical settings. It showed excellent hemodynamic and mechanical functions, and very low postoperative valve related complications in short term clinical experience.