• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.143-149
• /
• 2018

Recently, due to the large-scale damage of natural disasters caused by global climate change, a monitoring system applying remote sensing technology is being constructed in disaster areas. Among remote sensing platforms, the drone has been actively used in the private sector due to recent technological developments, and has been applied in the disaster areas owing to advantages such as timeliness and economical efficiency. This paper deals with the development of a preprocessing system that can map the drone image data in a near-real time manner as a basis for constructing the disaster monitoring system using the drones. For the research purpose, our system is based on the SURF algorithm which is one of the computer vision technologies. This system aims to performs the desired correction through the feature point matching technique between reference images and shot images. The study area is selected as the lower part of the Gahwa River and the Daecheong dam basin. The former area has many characteristic points for matching whereas the latter area has a relatively low number of difference, so it is possible to effectively test whether the system can be applied in various environments. The results show that the accuracy of the geometric correction is 0.6m and 1.7m respectively, in both areas, and the processing time is about 30 seconds per 1 scene. This indicates that the applicability of this study may be high in disaster areas requiring timeliness. However, in case of no reference image or low-level accuracy, the results entail the limit of the decreased calibration.

• Management & Information Systems Review
• /
• v.34 no.4
• /
• pp.1-13
• /
• 2015

This paper presents a mathematical formulation for container slot chartering model through strategic alliance between liner shipping companies. This paper develops a solution procedure to apply the model to real world problems and its applicability is demonstrated by a numerical example. The model presented in this paper has some important features which have never been considered in the previous researches. The model is linear model and pursuits profit maximization. And also it considers slot chartering capacity selection. This paper attempts to perform sensitivity analysis and compares slot chartering model with basic non-collaborating model in which there is no alliance and collaboration. As a result of sensitivity analysis, some interesting findings are obtained; Even though freight rate is more and more decreasing, the profit by slot chartering model is always higher than the basic model but the profit gaps become smaller. But The ratio of the profit gap to the profit of basic model is more increasing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.436-443
• /
• 2017

Recently, the development of new energy technologies has become a hot topic due to problems,such as global warming. Unlike renewable energy technologies, such as solar energy generation, solar power, and wind power, which are optimized to achieve medium or above output power, the output power of energy harvesting technology is very small and has not received much attention. On the other hand, as the mobile industry has been revitalized recently, the utility of energy harvesting technology has been reevaluated. In addition, the technology of tracking the maximum power point has been actively researched. This paper proposes a new MPPT(Maximum Power Point Tracking) control method for a TEM(thermoelectric module) for load resistance. The V-I curve characteristics and internal resistance of TEM were analyzed and the conventional MPPT control methods were compared. The P&O(Perturbation and Observation) control method is more accurate, but it is less economical than the CV (Constant Voltage)control method because it usestwo sensors to measure the voltage and current source. The CV control method is superior to the P&O control method in economic aspects because it uses only one voltage sensor but the MPP is not matched precisely. In this paper, a method wasdesigned to track the MPP of TEM combining the advantages of the two control method. The proposed MPPT control method wasverified by PSIM simulation and H/W implementation.

• Informatization Policy
• /
• v.21 no.3
• /
• pp.33-55
• /
• 2014

Public Shared Service Centers (PSSC) consolidate functions such as human resources, information technology, financial management or accounting into one office to serve an organization. A prominent example from the United States is the Federal Information Technology Shared Services Strategy. It supports mission, administrative, and infrastructure-related IT functions through providing organizations in the Executive Branch of the Federal Government (Federal Agencies) with policy guidance on the full range and lifecycle of intra- and inter-agency information technology (IT) shared services. This study looks at the Federal Information Technology Shared Services Strategy in order to draw lessons for fostering collaborative government through the use of PSSC. It finds the following factors are critical for success when implementing IT shared services: (1) agency leadership must be solidly behind their IT shared service plan, or the needed changes will not happen at the business unit, program, or system levels; (2) there must be a move away from internally-centered, program-specific thinking, and a move toward a paradigm of consuming and providing IT shared services with multiple groups whenever possible; and (3) successfully managing "loss of control" issues is central, and optimizing business processes is essential to move from stove-piped workflows to processes that work across the agency enterprise and beyond. Therefore, the study suggests that a Korean model of PSSC implementation be introduced, and that good IT Governance is a crucial component of PSSC strategies.

• The Korean Journal of Applied Statistics
• /
• v.28 no.4
• /
• pp.643-661
• /
• 2015

Korea Teachers Pension (private school pension) is a mandatory pension and a social security system for private school teachers to ensure the stability of subscribers by a supplying pension when they (and their dependents) face future economic risk due to retirement or death. Therefore, the Teachers Pension must provide stability and sustainability in regards to adequacy of income and to function as a pension. However, the Government Employees Pension System (GEPS) of Korea (the most representative special occupation pension) recorded a fiscal deficit in 2001 and with an accumulated deficit that is expected to grow; subsequently, various plans for the reform of GEPS have been actively discussed. The Korea Teachers Pension system is based on the GEPS scheme and is not free from the GEPS discussions on reforms of national pension. The current system for the Teachers Pension needs to be improved because it is expected to be depleted within the next 30 years due to low fertility and an aging population in Korea. This study discusses existing Teachers Pension schemes problems and suggests a projection method and revised plans to improve it. We use long-term financial projections of the Teachers Pension to estimate the fund exhaustion point and the minus balance of the financial scale as well as analyze the supply-demand burden structure that reflects the future population structure to propose Teachers Pension reforms that will improve stability and adequacy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.101-113
• /
• 2010

Recently actual rainfall pattern is decreasing rainy days and increasing in rainfall intensity and the frequency of flood occurrence is also increased. To consider recent situation, Engineers use deterministic methods like a PMP(Probable Maximum Precipitation). If design storm wouldn't occur, increasing of design criteria is extravagant. In addition, the biggest structure cause trouble with residents and environmental problem. And then it is necessary to study considering probability of rainfall parameter in each sub-basin for design of water structure. In this study, stochastic rainfall patterns are generated by using log-ratio method, Johnson system and multivariate Monte Carlo simulation. Using the stochastic rainfall patterns, hydrological analysis, hydraulic analysis and 2nd flooding analysis were performed based on GIS for their applicability. The results of simulations are similar to the actual damage area so the methodology of this study should be used about making a flood risk map or regidental shunting rout map against the region.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.3
• /
• pp.31-42
• /
• 2015

The Reinforced subgrade for railroad (RSR) was constructed for one way railway line with the dimension of 5 m high, 6 m wide and 20 m long to evaluate its performance under train design load. The RSR has characteristics of short length (0.3-0.4 H) of reinforcement and rigid wall, 30 and 40 cm vertical spacing of reinforcement installation. To enhance economics and constructability, three kinds of connections (welding, hinge & bolt, bold wire) were also designed to realize the integration between rigid wall and reinforced subgrade. Two times of static loading tests were done on the full size railroad subgrade. The maximum applied pressure was 0.98 MPa (the maximum test load 5.88 MN), which corresponds to 19.6 times of the design load for railroad subgrade, 50 kPa. The performance on the RSR was evaluated with the safety on the failure, subgrade bearing capacity and settlement, horizontal displacement of wall, and reinforcement strain. Based on the full scale test, we confirmed that the RSR with the conditions of 0.35 H (35% of height) short reinforcement length, hinge & bolt type connection for integration between rigid wall and reinforced subgrade, and 40cm vertical spacing of reinforcement installment shows good performance under train design load.

• The Korean Journal of Financial Management
• /
• v.14 no.3
• /
• pp.23-56
• /
• 1997

본 연구는 주식의 시장가치와 거래빈도, 기관지분비율, 거래량 등에 따라 주식수익률의 시계열상관이 일정한 패턴을 갖는 것으로 나타나고 있다는 사실을 실증적으로 확인하고, 주식수익률의 시계열상관에 주된 영향을 미치는 요인을 횡단면 분석방법을 이용하여 살펴보고 있다. 1985년부터 1995년까지의 기간에 걸친 일별수익률자료를 이용하여 분석한 결과를 요약하면, 1) 규모, 거래빈도, 기관지분비율, 거래량 등이 작은 주식들로 구성된 포트폴리오일수록 수익률이 강한 양의 자기상관을 갖게 되며, 또한 그러한 변수들의 크기가 큰 주식들로 구성된 포트폴리오의 수익률에 대하여 후행하는 관계에 있다는 보여주고 있다. 2) Lo and MacKinlay(1990a)의 비거래모형을 이용한 분석결과에서는 한국주식수익률의 시계 및 상관이 전적으로 비거래로 인하여 나타나는 현상이 아니라는 것을 보여주고 있다. 3) 시계열상관의 정도를 나타내는 후행척도를 상기한 변수들에 대하여 회귀분석한 결과는 모든 변수들이 주식수익률의 시계열상관에 동시적으로 영향을 주고 있다는 것을 보여준다. 특히 시계열상관을 야기하는 요인들 중에서 거래빈도는 분석기간에 관계없이 항상 시계열상관에 음의 영향을 미치는 것으로 나타나고 있다. 기관지분비율과 거래량은 분명히 시계열상관에 음의 영향을 미치지만, 분석기간에 따라 유의성에 다소 차이를 보여주고 있다. 수익률의 변동성은 전반기의 경우에 시계열상관과 음의 관계를, 후반기의 경우에는 양의 관계를 갖는 것으로 나타나고 있다. 이러한 검증결과들로 미루어, 한국주식수익률의 시계열상관은 주가의 반응에 영향을 주게되는 시장구조나 투자패턴 등이 전 후반기에 있어서 서로 다르기 때문에 나타나는 현상으로 보인다.력(事前賣却努力)이 협의발행하에서 더 높았으나 발행일 직후의 주가회복은 보이지 않아 인수방식에 따른 가격안정화(價格安定化) 노력의 차이는 없었다. 발행기업들간의 주가차별화의 정도를 분석한 결과 협의발행에서 인회활동(認淮活動) (certification effects)을 더 잘 할 수 있다는 사실을 지지하지 못했다.범위(範圍)에 벗어나 한국주식시장(韓國株式市場)에서 주식시장(株式市場)의 비효율성(非效率性)을 배제할 수 없는 것으로 나타났다. 뿐만 아니라 차기에도 이어지고 화폐량과 소득이 주가의 결정에 영향을 미치고 있으며 다른 금융변수(金融變數)들은 영향을 미치지 않고 있다. 그러나 실질화폐잔고와 실질주가 장단기수익비율 화폐차등수익률과 소득변화률과는 장기적(長期的) 정상적(定常的) 균형관계(均衡關係)를 형성하고 있다. 따라서 장기적 관점에서 증권시장은 경제성장을 위한 통화정책과 각 분야의 균형적 성장을 유발할 수 있는 재정정책(財政政策)이 요청되고 있다. 위의 논의에서 유추할 수 있는 것은 화폐의 영향을 완화시키기 위하여 option시장의 개발과 농산물, 광물, 기타 실물 및 금융에 대한 선물시장의 개설이 요청된다. 이와 같은 시장을 통하여 통화 정책이 증권시장에 미치는 과도한 효과를 축소시켜 합리적이고 건전한 증권시장(證券市場)의 발전(發展)과 금융시장(金融市場)의 원활한 발전이 이룩될 수 있을 것이다. 자본시장이론(資本市場理論)에서는 화폐는 무시하고 실물적인 관점에서 증권가격의 결정을 연구하거나 위험분석에 주안점이 주어져 왔었다. 본 연구를 통하여 통화정책의 결과가 자본시장에 직접적으로 영향을 미치고 있음을 확인하였다. 통화금융정책과 주가의 유기적 관계를 확인한 본 논문의 결과를 정책당국이 참고하여

• KDI Journal of Economic Policy
• /
• v.14 no.3
• /
• pp.3-21
• /
• 1992

By localizing the production of core parts and intermediate goods previously imported from Japan, Korean firms have been striving to increase their market share and profit in the final goods market in which Japanese firms are dominating. Korean producers' efforts, however, have often been thwarted by Japanese suppliers' "strategic" behavior. This competitive strategy involves Japanese exporters supplying parts and intermediate goods at very high prices until Korean firms must locally develop them, and then setting the prices far below the previous level so that the profitability of localization is dramatically reduced, or even means a loss for the Korean manufacturer. This paper intends to explain the strategic behavior of Japanese firms through the concepts of strategic interactions and joint economies. Strategic interactions can be aggressive or accommodating depending on whether competitors are dealing with strategic substitutes or complements. Joint economies exist in multi-stage competition when competition in the previous state favorably influences "profits" of the ensuing stage. Competiton between Korean and Japanese firms (a two-stage game involving production and technology rivalries) can be characterized by joint economies and strategic substitutes: joint economies since technological improvement results in more profits in the production stage; and strategic substitutes since an increase in marginal profits of one firm brings about a decrease in marginal profits of the other in a duopolitic production stage. This implies that the flood of "low price" Japense substitutes is an almost "natural" phenomenon in the context of the duopolistic market described in this paper. In the technology competition stage, on the other hand, technology development and technology transfer can be either strategic complements or substitutes. This implies that, in typical comparative static analyses, the effect of changes in exogenous variables cannot be expected a priori. Thus it becomes very difficult to determine the desirability of applying various policy measures such as countervailing duties, R&D subsidies, and creating demand for localized products. For these reasons, it is indeed likely that the measures suggested as means of circumventing the strategic behavior of Japanese firms (and enhancing technological development of Korean firms) may not work.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.5
• /
• pp.515-525
• /
• 2015

Currently, according to the climate change, serious damage by typhoon has been occurred in the world. In this respect, the research on the prediction model to minimize the damage from various natural disaster has been conducted in several developed countries. In the case of U.S, various models to predict building damage costs have been used widely in many organizations such as insurance companies and governments. In South Korea, although studies regarding damage prediction model according to typhoon have been conducted, the scope has been only limited to consider the property of typhoon. However, it is necessary to consider various factors such as typhoon information, geography, construction environment, and socio-economy factors to predict the damages. Therefore, to address this issue, first, correlation analysis is conducted between various variables based on the data of typhoon from 2003 to 2012. Second, the damage prediction model by using regression analysis is developed based on suggested influence factors. The findings of this study can be utilized to develop the model for predicting the damage costs of buildings by typhoon like HAZUS-MH of US.