• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.137-137
• /
• 2002

목적： 동시획득 T1/T2 강조 경사자장 펄스열을 이용하여 근골격계의 종양 관류 평가를 하고자 한다. 대상 및 방법： 근골격계 양성 및 악성 종양을 대상으로 동시획득 T1/T2 강조 경사자장 펄스열을 이용하여 시간해상도를 1.2초로 하여 1000회(약20분)를 반복하여 역동적 영상을 얻는다. 각각의 TR/TE1/TE2는 10/2/8 msec이다. 각 시기에서 서로 다른 TE를 가지고 있는 두 개의 영상을 이용하여, 수학적으로 분리하여 T1과 T2 값을 얻고, 이를 시간에 따라 배열한다. 이를 통하여, T2의 경우에는 일차효과를 이용하여 조직관류량(tissue blood volume)을 측정하고, T1에서는 2구획모델을 이용하여 투과도(permeability)를 측정한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1114-1118
• /
• 2010

본 연구에서는 HyGIS(Hydro Geographic Information System) 환경에서 구동되는 물리적 분포형 모형인 GRM(Grid based Rainfall-runoff Model) 모형(HyGIS-GRM)에서 사용자에 의해 추정되는 주요 매개변수인 초기포화도, 하도 최소경사, 하도 조도계수에 대한 민감도를 분석하고, 모형의 보정을 위한 각 매개변수의 추정 과정을 고찰하였다. 매개변수 민감도 평가는 초기포화도, 하도 최소경사, 하도 조도계수를 대상으로 각각을 기준 값에서 ${\pm}2%$ 간격으로 ${\pm}10%$까지 변화시킨 후 이를 유출모의에 적용하고, 첨두유량, 첨두시간 및 총유출량의 변화를 검토하였다. 민감도 분석 결과 초기포화도는 첨두유량, 첨두시간 및 총유출량에 대해서 모두 가장 민감한 것으로 평가되었다. 하도 조도계수는 첨두시간에 대해서는 초기포화도와 유사한 민감도를 나타내었으며, 첨두유량과 총유출량에 대해서는 상대적으로 작은 민감도를 나타내었다. 하도 최소경사는 첨두시간에 대해서는 초기포화도 및 하도 조도계수와 유사한 민감도를 나타내었으며, 첨두유량에 대해서는 하도 조도계수와 유사한 민감도를 나타내었다. 그러나 총유출량에 대해서는 민감도가 매우 작은 것으로 평가되었다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2582-2584
• /
• 2003

역전파 신경망 (BPNN)은 반도체 공정 모델링에 효과적으로 응용되고 있다. 뉴런의 활성화 함수는 동일한 값을 가지며, 이로 인해 예측정확도를 증진하는 데에는 한계가 있었다. 본 연구에서는 난수발생기(Random generator-RG)를 이용하여 뉴런 경사들이 다중값을 가지도록 최적화하였다. 본 기법은 은닉충의 뉴런수의 함수로 고찰하였으며, 종래의 고정된 경사를 갖는 모델과 그 성능을 비교 평가하였다. 평가에 이용된 데이터는 플라즈마 식각 공정데이터이며, 모델에 이용된 응답은 식각률과 프로파일 각이다. 비교결과 종래의 모델에 비해 예측정확도가, 식각률의 경우 19%-43%, 프로파일의 경우 10%-56% 정도 향상하였으며, 이는 제안된 기법이 모델개발에 매우 효과적으로 적용될 수 있음을 보여준다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.19-27
• /
• 2018

Terzaghi proposed a 2D formula for arching based on the assumption of a vertical sliding surface induced in the upper part due to the downward movement of a trapdoor. The formula was later expanded to consider 3D tunnel excavation conditions under inclined sliding surfaces. This study further extends the expanded formula to consider the effects of different ground properties and inclined sliding conditions in the transverse and longitudinal directions considering anisotropic ground conditions, as well as 3D tunnel excavation conditions. The 3D formula proposed in this study was examined of the induced vertical stress under various conditions (ground property, inclined sliding surface, excavation condition, surcharge pressure, earth pressure coefficient) and compared with the 2D Terzaghi formula. The examination indicated that the induced vertical stress increased as the excavation width and length increased, the inclination angle increased, the cohesion and friction angle decreased, the earth pressure coefficient decreased, and the surcharge pressure increased. Under the conditions examined, the stress was more affected at low excavation lengths and by the ground properties in the transverse direction. In addition, The comparison with the 2D Terzaghi formula showed that the induced vertical stress was lower and the difference was highly affected by the ground properties, inclined sliding conditions, and 3D tunnel excavation conditions. The proposed 3D arching formula could help to provide better understanding of complex arching phenomena in tunnel construction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.343-350
• /
• 2015

The natural convection heatsink is the most commonly used cooling device, especially for high-power LED lights, because of its reliability and low long-term cost. High power LED lights are generally used in an inclined configuration for street lamps and security lamps. However, it was difficult to estimate the thermal performance of an inclined heatsink, because the results from previous studies are not applicable to the inclined configuration. In this study, we measured the thermal performance of an inclined cylindrical heatsink with plate fins. Various fin numbers, fin heights, base temperatures, and inclination angles ($30^{\circ}$ and $60^{\circ}$) were examined. Based on the experimental results, the Nusselt number correlation is presented. This correlation is applicable when the Rayleigh number, ratio of the fin height to cylinder diameter, and fin number are in the ranges 100,000-600,000, 1/6-1/2, and 9-72, respectively.

• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.679-688
• /
• 2003

For box girders in which the longitudinal tendon is profiled in the inclined webs, longitudinal prestressing force will induce transverse effects as well as longitudinal ones. In this paper, the method to estimate transverse effects induced by longitudinal prestressing is proposed. The concept of transverse equivalent loading which is calculated through longitudinal prestressing analysis is developed. The transverse stress in slabs of box girders due to longitudinal prestressing are investigated. The comparison of numerical results of the proposed method and those of folded plate method represents that the method is reasonable. Numerical analyses are carried out depending on the parameters such as web inclination and ratio of girder length to tendon eccentricity. Analysis results show that when only prestressing are considered the magnitude of transverse stress in slabs of box girder is not so large. However, if the other stresses due to dead and live load et al. are superposed on these stresses, it may be that the longitudinal prestressing effects are significant.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1963-1970
• /
• 1992

An oscillatory motion of the natural convection in a two dimensional, partially divided square enclosure heated from below, and fitted with a partition is investigated numerically. The enclosure was composed of the lower hot and the upper cold horizontal walls and the adiabatic vertical walls, and a partition was situated perpendicularly at the mid-height of the one vertical insulated wall. The governing equations are solved by using the finite element method with Galerkin method. The computations were performed with the variation of the length and the thermal conductivity of the partition, and Rayleigh number based on the temperature difference between horizontal walls and the enclosure height with water(Pr=4.95). also, the effect of the inclination angles was studied for the transition to the oscillating flow. As the results, it was found that the intensity and frequency of oscillatory motion were affected significantly by the Rayleigh number and the length of partition. The effect of oscillatory motion was weaken with the increase of the thermal conductivity of partition. The inclination angle for the transition was raised with the increase of Rayleigh number and the length of partition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3374-3383
• /
• 2011

In this study, numerical analyses for slamming impact phenomena have been carried out using a 2-dimensional wedge shaped structure having finite deadrise angles. Fluid is assumed incompressible and entry speed of the structure is kept constant. Geo-reconstruct(or PLIC-VOF) scheme is used for the tracking of the deforming free surface. Numerical analyses are carried out for the deadrise angles of $10^{\circ}$, $20^{\circ}$ and $30^{\circ}$. For each deadrise angle, variations are made for the grid size on the wedge bottom and for the entry speed. The magnitude and the location of impact pressure and the total drag force, which is the summation of pressure distributed at the bottom of the structure, are analyzed. Results of the analyses are compared with the results of the Dobrovol'skaya similarity solutions, the asymptotic solution based on the Wagner method and the solution of Boundary Element Method(BEM).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.536-542
• /
• 2011

Dissimilar metal welds in nuclear power plant are known as very susceptible to PWSCC flaws, and periodically inspected by the qualified inspector and qualified procedure during in-service inspection period. According to field survey data, the majority of their DMWs are located on tapered nozzle or adjacent to a tapered component. These types of configurations restrict examination access and also limit examination volume coverage. Additionally, circumferential scan for axially oriented flaw is very difficult to detect located on tapered surface because the transducer can't receive flaw response from reflector for miss-orientation. To overcome this miss-orientation, it is necessary adapt skewed ultrasonic transducer accomodate tapered surface. The skewed refracted longitudinal ultrasonic transducer designed by modeling and manufactured from the modelling result for axial flaw detection. Experimental results showed that the skewed refracted longitudinal ultrasonic transducer get higher flaw response than non-skewed refracted longitudinal ultrasonic transducer.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.27-37
• /
• 2007

This research was conducted to determine the optimum lifting positions on precast concrete slabs for precast concrete pavement construction, based on the analysis of concrete stress distribution under various lifting conditions. To analyze stresses in concrete slabs, the finite element method was implemented and a numerical model of the precast slab that was going to be used in the experimental construction was developed. Changes in the stress distribution due to the lifting angle were investigated because slab lifting is not always performed in the perpendicular direction to the slab surface. In addition, the effect of the lifting level, the distance between the neutral axis of the slab and the lifting point, on the stress distribution was investigated since the lifting point is not always at the neutral axis of the slab. To consider the actual steel design of the precast slab, the effect of the reinforcement near the lifting point was also investigated. From this study, the optimum lifting positions of the precast slabs were determined according to the lifting angle and level, and the results were compared with the lifting positions used in the PCI standards.