• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.103-103
• /
• 2003

공간해상도가 높고 영상 신호량의 증가를 위해 TDI(time delay and integration) 방식의 센서를 이용하는 저궤도 위성카메라의 경우 지구의 자전효과나 위성의 자세 불안정 등으로 인해 촬영된 영상의 퍼짐현상(smearing)이 나타난다. 본 연구에 따르면 선형운동에 의한 결과로 발생하는 영상퍼짐은 위성의 자세제어 특성 뿐 만 아니라 위성의 궤도 특성과 TDI 단계, 지상 촬영 지점의 위도 및 경사촬영 각도에 의해 결정되며 다목적 실용위성 2호(KOMPSAT2)의 탑재카메라를 실례로 살펴본 해상도 1m급의 태양동기궤도 위성의 경우 별도의 보정 과정이 없을 경우 영상의 퍼짐이 심각한 것으로 나타난다. 주된 원인은 지구의 자전효과이며 영상퍼짐의 정도는 위성 직하점의 위도에 따라 변하고 카메라의 경사촬영 각도와는 연관성이 작은 것으로 나타난다. 또한 촬영전에 자세제어를 이용해 카메라의 Yaw축 각도를 조정할 경우 영상퍼짐현상이 현저히 감소함을 보여준다.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.219-224
• /
• 1986

Spectral induced polarization (IP) responses for 20-degree dipping body are obtained by both numerical and scale models. The IP responses for the dipping body vary not only with current frequencies but also with resistivity ratios between the body and the surrounding medium. If the ion concentration related to polarizable reaction is constant, the resistivity of polarizable body depends only on the current frequency. This implies that the IP responses to the resistivity ratio are qualitatively equivalent to those to the current frequency. The numerical results with wide-range resistivity ratios, therefore, can be used as standard curves for the interpretation of spectral IP data.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.69-78
• /
• 2018

The purpose of this study is propose eco-friendly remodeling while protecting the living environment of existing residents and preserving the living in pleasant by considering the characteristic of high density sloped residential area. And then, the optimum insulation condition is analyzed based on the energy efficiency, economic analysis and environmental effect. It will be possible as the basic information for remodeling of each housing in sloped area. The energy demanding, cost and the carbon emission reduction is analyzed with the residential area in Seo-gu, Busan by eco-remodelling.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.60-67
• /
• 2011

A repeated impregnation and carbonization process was introduced to product high-density woodceramics using a resin impregnation board. The density profile were measured to further confirm morphologically and structurally occurred changes of one-time and two-time phenolic resin-treated and carbonized woodceramics. After the two-time carbonization of the products, the minimum, average and maximum densities increased more than those of the one-time carbonized woodceramics, and the increase of density profile. Therefore, it is considered that the preparation of uniformed woodceramics with high-density and low density dissipation can be produced by a repeated impregnation and carbonization).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.84-90
• /
• 2004

A prediction of SEE rates for a candidate microprocessor is made based on the ground experiment results with a proton accelerator. Populations of charged particles in space are estimated with numerical models such as AP8, JPL91 and CREME. The cross section curves that are previously obtained with the accelerator are then employed for SEE prediction. Both the high and low inclinations are considered for low-earth orbits with nominal altitudes of about 685km. The results show that the occurrence rate of SEEs for the candidate device is acceptable for low-inclinations, but can be considerable under worst conditions for high inclinations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.303-311
• /
• 2002

Recently, the research that analyze topography parameters that need in hydrology analysis using GIS techniques is achieved. DEM that is used in topography analysis can be constructed effectively using contour data of digital map. Therefore, DEM's applicability is increasing gradually in several fields. In this study, DEM of 20∼l00m grid size was applied PYONGCHANG river and JUBANG river basin to analyze what effect DEM grid size causes about slope and drainage watershed at topography parameter extraction. This study drew a regression equation about slope change by DEM grid size. As a result, according as DEM grid size increases, slope decreases, and basin area could know that is not change almost.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.204-204
• /
• 2019

국지성 호우의 증가로 인해 도시 지역의 내수침수피해가 빈번하게 발생하고 있다. 특히 배수의 흐름이 집중되는 저지대 지역과 노후화된 하수관거가 설치된 지역에서 특히 피해가 집중되고 있으며, 이는 도로 측면에 설치된 빗물받이와 같은 하수시설에서 원활하게 배수가 되지 않기 때문에 강우 발생시 도로표면에 노면수가 정체되어 피해가 발생하고 있다. 과거 도로 노면의 형상과 강우의 임계 지속시간을 고려한 적정 우수 유출량 산정에 관한 연구가 진행된 바 있으나, 현재 발생하는 국지성 호우의 형태나 강우강도의 변화에 따른 유출량의 변화가 발생하였으며, 도달시간 산정식에 따른 매개변수의 차이와 새로운 도달시간 산정식의 개발로 도달시간의 결과가 크게 차이가 날 수 있다. 따라서 도로의 침수피해를 막고 교통 안정을 유지하기 위해서는 도로 조건을 고려한 도로 입구 및 하수관의 적절한 설계 등 다양한 연구가 주기적으로 이루어져야 한다. 본 연구에서는 강우 유출 모델인 SWMM 모형과 계산식을 이용하여 도로 표면의 폭과 길이, 도로 종횡단의 변화량, 재 산정한 강우강도에 따른 유출량을 계산하였다. 도로 표면의 폭과 길이, 경사를 다양하게 입력하였으며, 또한 각 Case에 따라 최대 유출량을 생성하는 임계지속기간을 결정하고 다양한 도달시간 산정식의 결과와 비교하여 상관관계를 분석하였다. 분석결과 도달시간은 산정식의 매개변수에 따라 차이가 발생하였으며, 도로표면의 길이와 횡단경사에 크게 영향을 받는 것으로 분석되었으며, 횡단경사보다 종단경사가 클 경우 도달시간이 길어져 유량의 집중을 막는 효과가 있는 것으로 나타났다.

• Journal of Advanced Navigation Technology
• /
• v.26 no.4
• /
• pp.195-204
• /
• 2022

In this paper, we described the rapid initial alignment techniques of projectile navigation system for use in inclined launch systems. One-shot alignment technique, one of the rapid initial alignment techniques, is possible to align a navigation system within seconds because it uses external information from an launcher navigation system. However, since it has only been used in vertical launch systems, its performance in inclined launch systems has not been verified. Therefore, this paper analyzed the error elements that occur when the one-shot alignment technique is applied to the inclined launch system, and introduced a method to improve the alignment performance by minimizing those errors. Additionally, By simulating and testing the performance of the proposed alignment technique, it was verified that it is effective even in an environment where a real navigation system is used.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.273-281
• /
• 2005

The weight of spectacles fined on is resolved into its components along the nose's slide plane and the normal to the nose plane where the nosepad is located. The equation and its numerical solution to determine the component force was derived as a function of splay angle ${\Psi}$, $sin{\Psi}$, $cos{\Psi}$, and $cot{\Psi}$, incorporated with ${\theta}$ and ${\Phi}$, the angles viewed from side and front of the face, respectively. Values of inclination angle ${\theta}$ and ${\Phi}$ could be obtained to fulfill the condition where the frictional force between the nose and pad is either greater than the normal pressure exerted by the spectacles on the nose. With the value of ${\theta}$ fixed the normal pressure increases as ${\Phi}$ increases. With ${\Phi}$ fixed, the effect of ${\theta}$ is the same.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1051-1059
• /
• 2015

Wave runup is one of the most important factors affecting the design of coastal structure exposed to wave attack. In this study, two dimensional laboratory tests were conducted under the different random wave conditions and structure configurations to develop a formula to predict runup heights. Rubble-mound structure consisted of tetrapod armour blocks with 1:1.5 and 1:2 slopes. The relative water depths (the ratio of the significant wave height to water depth at the toe) ranged from 0.14 to 0.56. The formula proposed here is applicable to surf similarity parameter ranging from 2 to 6. Runup heights on 1:2 slope were higher than those on 1:1.5 slope. Runup heights were reduced by 5% when the armour layer thickness increased two times.