• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2017

This study undertakes an evaluation of blast effect through the analysis of the contribution rate and effect that different artificial joint number, artificial joint spacing and artificial joint angle have on blast velocity. Blast velocity according to the different state of the artificial joint was obtained using AUTODYN, a dynamic analysis program. The result of the numerical analysis was subjected to further normalization analysis. For the contribution rate of design factors was analyzed using the robust design method. The orthogonal array used in the analysis was $L_9(3^4)$ and each parameters were having 3 levels. The result of normalization analysis regarding the artificial joint angle was indicated a tendency in which blast velocity decreased. The result of analyzing blast velocity regarding artificial joint spacing and artificial joint angle was indicated a tendency in which blast velocity decreased as artificial joint spacing increased when the angle was perpendicular. In the case of blast velocity contribution rates they were ranked in the descending order of artificial joint angle, artificial joint number, artificial joint spacing.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.305-306
• /
• 2022

본 연구에서는 강우에 의한 현장 사면 붕괴현장을 조사하여 원인 분석 후에 안정적인 비탈면 경사를 결정한 사례연구로서 사면붕괴현장을 조사하여 사면 경사를 당초 약40°에서 29°로 완만하게 함으로서 사면의 안정을 확보하는 결론을 도출하였다.

• 대한치과보철학회:학술대회논문집
• /
• 1993.12a
• /
• pp.15.1-15.1
• /
• 1993

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.21-32
• /
• 2010

The convergence angle of a prepared tooth is a very important factor in the retention and resistance of a crown restoration. But various intraoral environments and clinician's techniques make it difficult to obtain the ideal inclination. Therefore, in this study, clinical convergence angle of a prepared tooth was investigated. The data was collected from the patient models of prosthodontic residents and the patient models of general practitioners. The images of mesiodistal and buccolingual surfaces were taken with a digital camera to evaluate the convergence angle on 'ImageJ' program. The images were classified according to the criteria (1. Clinician group, 2. Position in the dental arch, 3. The purpose of abutment preparation)and then analyzed. The mean convergence angle of a prepared tooth for Korean clinicians was $15.02^{\circ}$ (${\pm}10.13^{\circ}$). 1. It was significant in the convergence angle between the general practitioner group and the prosthodontic resident group(p<0.05). 2. It was significant between the mesiodistal and buccolingual surface in the the prosthodontic resident group(p<0.05). 3. For the general practitioner group, it was significant when anteriors and premolars were compared with molars(p<0.05). For the prosthodontic resident group, it was significant when anteriors and premolars were compared with molars (p<0.05). 4. When divided into upper and lower arches, for the general practitioner group, it showed significant difference in the buccolingual aspect(p<0.05). Also in the prosthodontic resident group, it showed significant difference in the buccolingual aspect(p<0.05). 5. Dividing left and right sides of the arches, there was no significant difference in the general practitioner group and the prosthodontic resident group(p>0.05). 6. In the general practitioner group, it was significant in the mesiodistal axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). In the prosthodontic resident group, it was significant in the mesiodistal and overall axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). Clinical convergence angle of prepared tooth in Korea was included in agreement with other studies investigating convergence angle that ranged from 10 to 22 degrees, achieved in clinical practice.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.99-108
• /
• 2009

Since the preexisting evaluation methods of landslide susceptibility take somehow long time to determine the slope stability based on the field survey and laboratory analysis, there are several problems to acquire immediate evaluation results in the field. In order to overcome the previously mentioned problems and incorrect evaluation results induced by some subjective evaluation criteria and methods, this study tried to develop a method of landslide susceptibility by a quantitative and objective evaluation approach based on the field survey. Therefore, this study developed an evaluation chart for landslide susceptibility on natural terrain using the AHP analysis method to predict landslide hazards on the field sites. The AHP analysis was performed by a questionnaire to several specialists who understands mechanism and influential factors of landslide. Based on the questionnaire, weighting values of criteria and alternatives to influence landslide triggering were determined by the AHP analysis. According to the scoring results of the analysed weighting values, slope angle is the most significant factor. Permeability, water contents, porosity, lithology, and elevation have the significance to the landslide susceptibility in a descending order. Based on the assigned scores of each criterion and alternatives of the criteria, an evaluation chart for landslide susceptibility was suggested. The evaluation chart makes it possible for a geologist to evaluate landslide susceptibility with a total score summed up each alternative score.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.380-387
• /
• 2006

Objective: The purpose of this study was to compare the right and left differences of frontal ramal inclination in chin-deviated individuals. Methods: Thirty adult patients with clinically apparent chin deviation were selected as the chin-deviated group, and 30 adult patients with symmetric faces were selected as the control group. On the posteroanterior cephalograms, the frontal ramal inclination was measured, and the right and left differences were compared and analyzed. Results: While the control group did not show right and left differences of frontal ramal inclinations, the chin-deviated individuals showed right and left differences of frontal ramal inclination. In chin-deviated individuals, the frontal ramal inclinations of the non-deviated side were statistically greater than those of the deviated side. The right and left differences of frontal ramal inclinations, with menton deviation and the right and left differences of maxillary heights showed statistically significant correlation. Conclusion: We conclude that the frontal ramal inclinations should be considered in the diagnosis of facial asymmetry.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.3
• /
• pp.179-184
• /
• 2003

This study investigated the relationship of fuel weight and depth together with slope on the spread of forest fire. Fire spread was faster on the greater slope in forested land. Fire had a greater spread rate with lighter fuel weight. The thickness of the fuel bed and forest fire spread rate were not related. The fire spread rate was closely related to the slope and weight of the fuel bed (significant at 0.01, 0.05, respectively). The thickness of the fuel bed was not significant (0.05).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.201-201
• /
• 2021

국내 하천은 크게 소하천, 지방하천, 국가하천으로 구분하며, 유역 내 규모가 작은 하천에서 큰 하천으로 점차적으로 합쳐지는 것이 일반적인 하천 형태이다. 특히, 본류와 지류가 만나는 합류부에서는 단순 하도에서의 흐름과 다른 흐름이 나타날 수 있다. 이러한 차이로 인해 하천설계기준(국토교통부, 2018)에 일반적으로 하천에서 지류와 본류의 합류부를 설계할 때, 지류와 본류의 흐름방향에 대한 각도를 예각으로 하는 등의 합류부에 대한 설계기준이 있으나 국내지형은 산지가 다수 분포되어 있어 불가피하게 급경사의 지류가 존재하는 경우가 발생한다. 김상호 등(2014)은 남한강 지류 합류부의 주요 영향인자를 고려한 수치해석을 통해 홍수위의 변화를 사전에 예측하였고, 김지성, 김원(2020)은 합류부에서 발생하는 배수영향에 대해 유량산정 방법을 제안하였다. 복잡한 흐름에 대해서는 1차원 수치해석으로는 충분히 수위, 유량, 유속 등 흐름특성 파악에는 한계가 있으므로 본 연구에서는 홍수피해지도 작성 등에 사용되는 2차원 수치해석 모형인 FLUMEN을 활용하여 합류부의 흐름특성을 분석하였다. 연구대상지역은 급경사로 합류되는 지류인 동두천과 본류인 신천으로 합류부에 발생하는 수위, 유량, 유속 등 동수역학적 특성 변화에 따른 월류 여부와 제체에 발생하는 압력분포를 분석하였다. 분석결과는 하천의 합류부에서의 치수시설 유지관리 및 향후 급경사 지류를 포함하고 있는 하천의 설계에 주요 참고자료로 활용될 것으로 기대한다.

• Composites Research
• /
• v.25 no.6
• /
• pp.217-223
• /
• 2012

This study investigates a geometrical nonlinear dynamic behaviors of laminated skew plates made of advanced composite materials (ACM). Based on the first-order shear deformation plate theory (FSDT), the Newmark method and Newton-Raphson iteration are used for the nonlinear dynamic solution. The effects of cutout sizes, skew angles and lay up sequences on the nonlinear dynamic response for various parameters are studied using a nonlinear dynamic finite element program developed for this study. The several numerical results were in good agreement with those reported by other investigators for square composite plates with or without central cutouts, and the new results reported in this paper show the significant interactions between the cutout, skew angles and layup sequence in the laminate. Key observation points are discussed and a brief design guideline of skew laminates is given.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.321-321
• /
• 2011

최근 기상이변으로 인하여 예측이 어려운 게릴라성 집중호우 등의 증가로 재해 및 재난이 빈번하게 발생하고 있으며, 특히 도시지역에서의 홍수피해로 막대한 인명과 재산피해가 발생하고 있다. 도시지역내로 유입되는 홍수는 다양한 형태와 크기를 가지는 건물과 도로의 배치에 의해 크게 영향을 받으며, 매우 복잡한 흐름특성을 나타내는 것으로 알려져 있다. 도시지역이 조밀한 건물군으로 구성되어 있을 경우 홍수의 대부분은 도로와 교차점을 통해 흐르므로 도시지역 내에서 홍수로 인한 피해를 저감하기 위해서는 도로 교차로에서의 홍수파의 전파특성을 분석하는 것이 중요하다. 교차로는 세 개 또는 네 개의 도로가 대칭 또는 비대칭으로 연결되어 있으며, 일반적으로 교차로에서의 흐름은 유입되는 유량이 상대적으로 적고 도로의 경사가 비교적 완만한 경우 상류 특성을 나타내나 이와 반대일 경우에는 상류 및 사류가 공존하는 복잡한 수면형을 나타낸다. 본 연구에서는 도지지역 내 도로 교차점에서 유입경사 변화에 따른 도로 교차부에서의 흐름특성을 수치모의 결과와 수리실험 결과와 비교하였다. Case 1은 수로의 유입경사가 3%일 경우 도로 교차로에서 수위 및 흐름특성을 수치모의결과와 비교한 결과 조도계수가 0.0086일 경우 RMSE 값은 X축에서는 0.0023, Y축에서는 0.0042로 수로중심에서의 수심분포가 잘 일치 하였으며, 흐름특성 또한 수치모의결과와 잘 일치하는 경향을 보였다. Case 2에서는 검증결과를 바탕으로 유입경사가 3%와 5%일 경우 도로와 교차점에서의 흐름특성을 수치적 방법을 통해 분석하였으며, 유입경사가 변화함에 따른 수면흐름특성을 모의하였다.