• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.27-31
• /
• 2003

This paper presents the results of air-drying processes and mositure content (MC) distribution of red pine (P. densiflora) and Japanese larch (L. leptolepis) square timber with 14 cm and 16.5 cm of face size, respectively. The air-drying rates of square timber were comparatively high during the first 8 weeks, after that gradually decreased. The time to air dry square timber from initial MC to specified MC of 18 percent required about 26 weeks for 14.0 cm and 32 weeks for 16.5 cm square of red pine, and 32 weeks for 14.0 cm and 48 weeks for 16.5 cm square of Japanese larch. The longitudinal- and transverse MC distribution of these air-dried squares showed slight moisture gradient. The effect of face size on moisture gradient of Japanese larch square was more pronounced comparing with red pine one.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.73-83
• /
• 2022

The factors influencing landslide occurrence were analyzed for six points on the upper slope and the 24 points on the lower slope along a forest road around Sangsan village in Chungju, Korea, where landslides have occurred due to heavy rainfall. In terms of physico-mechanical properties of the soil layer, the lower slope seemed to loosen owing to the higher porosity, lower unit weight, and lower friction angle compared with the upper slope. With respect to topographic characteristics, the lower slope had thicker regolith, more concave profile and plan curvatures, lower slope angles, and higher topographic wetness index values than the upper slope. Therefore, all the properties (except for the slope angle) appear to make the lower slope of the forest road more vulnerable to landslides than the upper slope. Apart from the physico-mechanical and topographic characteristics, inadequate maintenance and management of drainage facilities are also considered as further major factors influencing landslide occurrence.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.70-80
• /
• 2006

Spin echo gradient moment nulling pulse sequences were designed and implemented on a clinical magnetic resonance imaging system. A new technique was introduced for flow compensation that minimized echo time and effectively suppresses unwanted echoes on the slice selection gradient axis in spin echo sequences. A unified gradient shape was used in all orders of flow compensation up to the third order. A dual-purpose gradient was applied for flow compensation and to reduce unwanted artifacts. The sequences were used to generate images of phantoms and/or human brains. This technique was especially good at reducing eddy currents and artifacts related to imperfection of the refocusing pulse. The developed sequences were found to have shorter echo times and better flow compensation in through-plane flow than those of the previous models that were used by other investigators.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.1
• /
• pp.5-15
• /
• 2020

Dynamic behavior of pile foundation is significantly influenced by the dynamic interaction between soil and pile. Especially, in the sloping ground, the soil-pile interaction becomes very complex due to different resistance according to loading direction, soil residual displacement and so on. In this study, dynamic centrifuge tests were performed on the piles in the sloping ground. The model structures consisted of a single pile and 2×2 group pile. The soil-pile interaction has been investigated considering various conditions such as slope, single and group piles, and amplitude of input motions. The phase differences between soil and pile displacement and dynamic p-y curves were evaluated. The analysis results showed that the pile behavior was largely influenced by the kinematic forces between soil and pile. In addition, the dynamic p-y curve showed the complex hysteresis loop due to the effect of slope, residual displacement, and kinematic forces.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.65-73
• /
• 2009

Large scale model tests and numerical analyses are performed to investigate the stress distribution of pillar due to surface loading nearby two-arch tunnel which is constructed in the regularly jointed rocks. It is observed that the influence of discontinuities on the stress distribution in the discontinuous rock mass and the underground stresses induced by surface loading are greater than those of linear elastic theory. Especially, lines of equal stresses are developed to the direction of inclination according to the inclined grade. In cases of discontinuities imbedded in parallel with or vertical to the ground, the pressure bulbs are formed symmetrically, however, the inclined ones result in stress distribution in parallel with and vertical to the planes of discontinuities. Results indicated that stress distribution is seriously affected by the angle of discontinuity. When stresses propagating to the pillar need to be estimated, relative location of surface loading, grade of discontinuous plane, and location of two-arch tunnel should be carefully considered.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.229-240
• /
• 2004

The purpose of this study was to evaluate the compensatory changes of occlusal plane angle in relation to skeletal factors. Lateral cephalograms of 61 adults with normal occlusion and 92 adults with skeletal malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of horizontal relationships, the normal occlusion group and malocclusion group were classified Into subgroups of skeletal Classes I, II, and III, while in terms of vertical relationships, each group was also classified into horizontal , average, and vertical subgroups. Some measurements were evaluated statistically by ANOVA and Post Hoc, and the others were reviewed by Paired t-tests. In this study, only the occlusal plane angle to AB plane did not show a significant difference between the normal occlusion group and malocclusion group. After treatment, the occlusal plane angle to the AB plane of the malocclusion group was approximated to that of normal occlusion group. The LOP to AB plane angle of the normal occlusion group was 91.7 in skeletal Class I, 88.8 in skeletal Class II, and 93.5 in skeletal Class III. This study was done to assess the treatment changes of the occlusal plane in the malocclusion group, and to draw a comparison with the normal occlusion group in order to present a reference to establish a new occlusal plane inclination.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.3
• /
• pp.195-202
• /
• 2007

The normalized difference in incident solar energy between a target surface and a level surface (overheating index, OHI) is useful in eliminating estimation error of site-specific maximum temperature in complex terrain. Due to the complexity in its calculation, however, an empirical proxy variable called northern exposure index (NEI) which combines slope and aspect has been used to estimate OHI based on empirical relationships between the two. An experiment with real-world landscape and temperature data was carried out to evaluate performance of the NEI - derived OHI (N-OHI) in reduction of spatial interpolation error for daily maximum temperature compared with that by the original OHI. We collected daily maximum temperature data from 7 sites in a mountainous watershed with a $149 km^2$ area and a 795m elevation range ($651{\sim}1,445m$) in Pyongchang, Kangwon province. Northern exposure index was calculated for the entire 166,050 grid cells constituting the watershed based on a 30-m digital elevation model. Daily OHI was calculated for the same watershed ana regressed to the variation of NEI. The regression equations were used to estimate N-OHI for 15th of each month. Deviations in daily maximum temperature at 7 sites from those measured at the nearby synoptic station were calculated from June 2006 to February 2007 and regressed to the N-OHI. The same procedure was repeated with the original OHI values. The ratio sum of square errors contributable by the N-OHI were 0.46 (winter), 0.24 (fall), and 0.01 (summer), while those by the original OHI were 0.52, 0.37 and 0.15, respectively.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.247-261
• /
• 2002

There are much damage of people and property because of heavy rain every year. Especially, there are problem to major facility such as dam, bridge, road, tunnel, and industrial complex in the ground stability. So the counter plan for landslide or ground failure must be necessary In the study, the technique of regional landslide susceptibility assessment near the Ulsan petrochemical complex and Kumgang railway bridge was developed and applied using GIS. For the assessment, the geological structures such as bedding and fault were surveyed and the geological structure, topographic, soil, forest, and land use spatial database were constructed using CIS. Using the spatial database, the factors that influence landslide occurrence, such as slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil, type, age, diameter and density of forest, and land use were calculated or extracted from the spatial database. For application of geological structure, the geological structure line and fault density were calculated. Landslide susceptibility was analyzed using the landslide-occurrence factors by probability method that is summation of landslide occurrence probability values per each factors range or type. The landslide susceptibility map can be used to assess ground stability to protect major facility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.179-186
• /
• 2006

Effective interception area of street grate inlets was decreased by clogging with trash, debris, and sand. It also decreased the interception capability of grate inlets and increased the inundation area in street. Therefore, it is necessary to analyze the clogging characteristics and interception capability change by clogging for appropriate design and management of grate inlets. Hydraulic experimental apparatus which can be changed the gutter transverse slopes, longitudinal slopes of street and clogging condition of grate inlet ($40{\times}50cm$) was installed for this study. 81 total experiments were conducted with 8 different clogging condition. The interception capacities of grate inlets clogged curb direction are smaller than those of clogged flow direction. As the longitudinal slopes of street increase, the interception capacity of grate inlet decreases due to splash-over phenomena. This is also observed at grate inlets which has no clogging condition. In general, 50% of clogging factor was selected in design of grate inlet in foreign country. The clogging factor for same clogging condition are suggested 0.25~0.65 in domestic urban area.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.12
• /
• pp.47-60
• /
• 2023

At present, in South Korea, there is a growing concern regarding solar power facilities installed on slopes because they are prone to damage caused by natural disasters, such as heavy rainfall and typhoons. Each year, these solar power facilities experience soil erosion due to heavy rainfall and foundation damage or detachment caused by strong wind loads. Despite these challenges, the interaction between the ground and structures is not adequately considered. Current analyses primarily focus on the structural stability under external loads; the overall facility site's stability-excluding the solar structures-in relation to its surrounding slopes is neglected. Therefore, in this study, we use finite-difference method analysis to simulate the behavior of the foundation and piles to assess changes in lateral displacement and bending stress in piles, as well as the safety factor of sloped terrains, in response to various influencing factors, such as pile diameter, spacing between piles, pile-embedding depth, wind loads, and dry and wet conditions. The analysis results indicate that pile spacing and wind loads significantly influence lateral displacement and bending stress in piles, whereas pile-embedding depth strongly influences the safety factor of sloped terrains. Moreover, we found that under certain conditions, the design criteria in domestic standards may not be met.