• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.773-784
• /
• 2008

The present study was carried out to examine flow properties in linear drainage channels such as road surface drainage facilities. The finite difference formulation for the varied flow analysis was solved for flow profiles in the channels. Starting the first step at the control section, the Newton-Raphson method was applied for producing numerical solutions of the equation. We considered two types of linear drainage channels, a channel with one outlet at downstream end and a channel with two outlets at both ends. Moreover, the flow analysis for various channel slopes was performed. However, we considered channels with the two outlets of slopes satisfying the condition that the both ends are the control section. The maximum of those slopes was decided from the relation between the channel slope and the location of control section. The flow of a channel with one outlet was calculated upward and downward from the control section existing in channel or upward from the control section at downstream end. The flow of a channel with two outlets at both ends were calculated for upstream and downstream channel segments divided by the water dividend, respectively and the flow analysis was completed when the water depth at the water dividend calculated from upstream end was equal to that calculated from downstream end. If the slope was larger than the critical slope, the channel with two outlets was likely to behave like the channel with one outlet. The maximum water depth was investigated and compared with that calculated additionally from the uniform flow analysis. The uniform flow analysis was likely to lead a excessive design of a drainage channel with mild slope.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2267-2268
• /
• 2008

에너지 문제가 국제적인 이슈로 떠오르고 있는 가운데 열에너지와 전기에너지 사이의 에너지 변환 현상, 즉 열전효과를 이용한 열전발전은 최근 여러 국가에서 연구가 활발히 진행 중이다. 경사기능성 재료(FGM)란 기존의 물질들에 경사적인 특성 변화를 주어 새로운 물질로 탄생시킨 개념으로, 이 논문에서는 그동안 발표된 열전변환재료들의 열전변환특성을 이용하여 경사기능성재료를 구성하여 보았다. 또한 구성한 경사기능성재료와 단일재료를 이용하여 기본적인 열전발전회로에 적용시켜, 변환효율을 계산하여 보았다. 시뮬레이션 결과를 이용하여 경사기능성 열전변환재료와 단일 물질의 변환 효율을 비교하였으며, 경사기능성 열전변환재료가 단일 열전변환재료보다 뛰어난 성능을 갖고 있음을 유도하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1775-1780
• /
• 2009

개수로 마찰흐름 특성에 관한 연구로서 유량조사사업단(2006)의 우리나라 3대강 유역 하천 관측자료와 Jarrett(1984)의 미국 Colorado지역 하천의 관측자료로 부터 흐름특성을 구분하여 개수로 흐름의 마찰특성 또는 조도계수의 변이특성을 분석하였다. 기존 지수형 완난류 마찰계수 산정식(유동훈과 이민호,1997)의 비례상수 $\alpha$에 조도계수 n을 도입하여 실무에서 보다 편하게 적용할 수 있는 새로운 산정식을 개발하였다. 유량조사사업단의 관측자료 분석에 있어서 유량 관측시 관측지점의 수면경사 및 하상경사의 미관측으로 하천정비기본계획상에 제시된 지형으로부터 관측지점의 하상경사를 추정하였으며 1차적으로 에너지경사는 하상경사와 동일하다고 가정하였다. 이러한 가정하에 하천정비기본계획상에 제시된 Manning의 조도계수를 인용하여 관측유속과 계산유속을 비교8 분석하였다. 또한 전통적 산정식인 Ganguillet & Kutter(1869)식과 Manning(1889)식으로 부터 산정된 유속과의 비교를 통하여 조도계수 n을 추정하였고 추정된n을 도입하여 새로 개발된 지수형 마찰계수 산정식의 적용성을 입증하였을 뿐만 아니라 기존 조도계수 산정의 문제점을 제시하였다.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.5-15
• /
• 2023

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.5-9
• /
• 2011

There are technical difficulties in measuring the numerical apertures of multi-mode gradient-index plastic optical fibers (GI-POFs) due to their strong speckle noise originating from dopants, non-uniformity of gradient-index profile, and multi-mode interference. Therefore, we propose a new method of obtaining the numerical aperture by controlling the size of the incident laser beam and measuring the numerical aperture of GI-POF. The results show that we can get a value for the numerical aperture of GI-POF very similar to that measured by the conventional method. We can also obtain the optimum launching condition of input beam and maximum coupling efficiency.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.21-32
• /
• 2010

The convergence angle of a prepared tooth is a very important factor in the retention and resistance of a crown restoration. But various intraoral environments and clinician's techniques make it difficult to obtain the ideal inclination. Therefore, in this study, clinical convergence angle of a prepared tooth was investigated. The data was collected from the patient models of prosthodontic residents and the patient models of general practitioners. The images of mesiodistal and buccolingual surfaces were taken with a digital camera to evaluate the convergence angle on 'ImageJ' program. The images were classified according to the criteria (1. Clinician group, 2. Position in the dental arch, 3. The purpose of abutment preparation)and then analyzed. The mean convergence angle of a prepared tooth for Korean clinicians was $15.02^{\circ}$ (${\pm}10.13^{\circ}$). 1. It was significant in the convergence angle between the general practitioner group and the prosthodontic resident group(p<0.05). 2. It was significant between the mesiodistal and buccolingual surface in the the prosthodontic resident group(p<0.05). 3. For the general practitioner group, it was significant when anteriors and premolars were compared with molars(p<0.05). For the prosthodontic resident group, it was significant when anteriors and premolars were compared with molars (p<0.05). 4. When divided into upper and lower arches, for the general practitioner group, it showed significant difference in the buccolingual aspect(p<0.05). Also in the prosthodontic resident group, it showed significant difference in the buccolingual aspect(p<0.05). 5. Dividing left and right sides of the arches, there was no significant difference in the general practitioner group and the prosthodontic resident group(p>0.05). 6. In the general practitioner group, it was significant in the mesiodistal axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). In the prosthodontic resident group, it was significant in the mesiodistal and overall axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). Clinical convergence angle of prepared tooth in Korea was included in agreement with other studies investigating convergence angle that ranged from 10 to 22 degrees, achieved in clinical practice.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.928-933
• /
• 2004

The vibration characteristic is a primary design factor. The cylindrical shells are used as a primary components of complex structure. also, The cylindrical shells have oblique angle. In this study, The vibrational characteristics of steel and plain wave GFRP cylindrical shell with an oblique end are given by experimental and finite element method. To be find characteristic of the oblique end, the mass of the cylindrical shell is maintained. Natural frequency and mode shapes of isotropic and plain weave composite shells are obtained by modal test. The results are compared with those of the finite element method. The simply supported boundary conditions with bolts along the circumferential direction of the GFRP shell are well achieved. Also, The clamped boundary conditions is applied to the steel specimen. Those are shown to agree well with the analytical results and finite element analysis results.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.59-66
• /
• 2012

The purpose of this study is to estimate the behavior and the mechanism of debris flow on the slope, which has specially various gradient plane. The numerical simulation was performed by using the Finite Differential Element method (FDM) based on the equation for the mass conservation and momentum conservation. The mechanism of flow type for debris flow is divided into three flow types which are stony debris flow, immature debris flow, and turbulent water flow, respectively. First, flow discharge, water flow depth, sediment volume concentration was investigated by variable input of flow discharge at the straight slope angle and two step inclined plane. As the input of flow discharge was decrease, flow discharge and water flow depth was increased, after the first coming debris flow only reached at the downstream. As the input of flow discharge was increased, the curve of flow discharge and flow depth was highly fluctuated. As the results of RMS ratio, the flow discharge and flow depth was lower two step slope angle than the straight slope angle. Second, the behavior of debris flow was investigated by the four cases of gradient degree at the downstream of slope angle. The band width of flow discharge and flow depth for $14^{\circ}$ between $16^{\circ}$ was higher than other gradient degree, and fluctuation curve was continuously high after 10 seconds.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.613-618
• /
• 2008

본 연구에서는 개수로 마찰흐름 특성에 관한 연구로서 유량조사사업단(2006)의 우리나라 3대강 유역 하천자료와 미국의 Colorado지역 록키산맥 하천 관측자료를 통하여 개수로의 흐름특성을 집중적으로 검토하였다. 개수로 설계에 있어 수로의 흐름해석 및 마찰계수의 정확한 산정은 수로설계의 근간이 된다. 하지만 일반적으로 사용하고 있는 Manning(1889)식은 개수로 흐름특성을 판단하기에 너무 단순하여 상이한 결과를 보임에도 불구하고 단순성에 기인하여 사용되는 것으로 판단된다. Bazin(1865)과 Varwick(1945)의 개수로 실험결과를 보면 Nikuradse(1933)의 원형관수로 실험결과와 마찬가지로 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯 가지의 흐름특성이 존재함을 알 수 있다. 또한, 개수로 마찰계수의 특성변화를 보면 조고 또는 조도가 증가함에 따라 마찰계수가 상향으로 평행 이동하는 것을 볼 수 있다. 실험결과로부터 확인되는 이러한 흐름 특성이 현장에서도 분명히 나타날 것으로 판단하며 이러한 가설에 근거하여 각 하천의 관측자료를 분석하였다. 유량조사사업단의 우리나라 3대강 유역 하천 관측자료(2006)를 레이놀즈수의 함수인 완난류 흐름으로 전제하고 물의 기본적인 성질과 하천의 경사, 수심, 조고 등의 영향을 고려한 무차원수를 도입하여 마찰계수의 2차적인 분포특성을 파악하고자 하였다. 하지만 관측된 자료로부터 무차원수를 도입하여 산정된 마찰계수분포를 보면 마찰계수가 급격히 증가하고 추정된 유속과 관측된 유속을 비교하면 추정된 유속이 산개되는 경향이 나타났다. 이러한 문제점은 유량관측시 관측지점의 수면경사 및 하상경사의 미관측으로 하천정비기본계획상에 제시된 지형으로부터 하상경사를 추정하여 마찰계수와 유속을 산정하였다. 또한 하천정비기본계획상에 제시된 Manning의 조도계수를 이용하여 Ganguillet&Kutter(1869) 산정식과 Manning(1889) 산정식으로 부터 유속을 산정한 결과 오차가 크게 발생한 것을 확인하였으며, 실제 관측자료에 적합하도록 조도계수를 재 산정하였다. 논문의 분량 제한상 분석과정은 추후 논문에 제시하기로 하고 분석결과와 수위관측에서의 문제점을 제시하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.137-147
• /
• 2008

A reliability analysis has been performed to investigate the systematic stability of multi-failure modes of rubble-mound breakwaters. The reliability functions of four different failure modes are established straightforwardly. AFDA(Approximate Full Distribution Approcah) reliability models for each failure modes are directly developed and satisfactorily calibrated through the comparison with CIAD's results. In the reliability analysis of single failure mode, the probabilities of failure are calculated and the influence coefficients of random variables in the failure modes are properly evaluated. Meanwhile, three different models such as uni-modal bounds, bimodal bounds, and PNET are applied to evaluate the probabilities of failure of multi-failure modes for rubble-mound breakwaters. It may be found that uni-modal bounds tend to overestimate the probability of failure of multi-failure modes. Therefore, for the systematic reliability analysis of multi-failure modes, it is recommended to use bi-modal bounds or PNET which consider the correlation between the failure modes for rubble-mound breakwaters. By introducing the reliability analysis of multi-failure modes, it could be possible to find out the additional probabilities of failure occurred by the multi-failure modes of a multi-component system such as rubble-mound breakwaters.