• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.140
• /
• pp.73-79
• /
• 2005

The characteristics of a tilt sensor utilizing the resistance change of an electrolyte associated with inclination is investigated, and a dynamic compensation modeling is proposed to make the real-time measurement of the absolute slope possible even with sporadically dynamic motion. Although the proposed system is small, economical and accurate for quasi-steady slope measurement, since it contains a freesurface the evolution of the liquid surface that has no direct relation to the real slope must be excluded for any rapid rotations or translations. For various artificial motions the response of the sensor is analyzed and simplified modeling equations are proposed.

• The korean journal of orthodontics
• /
• v.18 no.2
• /
• pp.421-433
• /
• 1988

The purpose of this study was to investigate the characteristics of craniofacial morphology in adult with crowded dentition. The craniofacial morphology associated with normal and crowded of mandibular dentition was studied in lateral cephalometric radiograph obtained from 145 subjects grouped 44 males and 40 females in normal group, 33 males and 28 females in crowded group. The conclusions were as follows: Means, standard deviations and facial polygons from measurements were obtained from normal and crowded groups. Palatal plane to SN, occlusal plans to SN, mandibular plane to SN, mandibular plane to palatal plane and gonial angle measurements of crowded group were significantly different from normal group and were larger than normal group. SNA, SNB measurements of crowded group were significantly different from normal group and were smaller than normal group. Significant differences were observed between normal group and crowded groups on the basis of $SN/{\underline{1}}$, PP/1, $MP/{\bar{1}}$, and compared with normal group, upper incisors of crowded group were inclined more labially, whereas lower incisors of crowded group were inclined more lingually. Posterior facial height and ramal height were shorter in males of crowded group than those of normal group. Posterior facial height, mandibular length and posterior cranial base length were shorter in females of crowded group than those of normal group. Anterior facial height was longer in females of crowded group than those of normal group.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.445-456
• /
• 1997

This study was designed to examine the dental asymmetry in person with facial asymmetry and to examine the relationship between the degree of mandibular deviation and asymmetry of maxillary dental arch. The sample!, were divided to asymmetry group and normal group. The asymmetry group consisted of 21 subjects(6 males and 15 females) and their mean age was 23.5 years. The normal group consisted of 20 subjects(10 males and 10 females) and their mean age was 18.6 years. Anteroposterior, transverse position of all maxillary teeth except 3rd molars, vortical position of maxillary 1st molars, and angulation of central incisors were measured. The anterioposterior and transverse positions of teeth were measured on the maxillary dental casts, the vertical position of maxillary 1st molars and angulation of maxillary incisors were measured on posteroanterior cephalometric radiographs. The data were analyzed to examine whether significant asymmetries existed in each of the asymmetry and normal groups. The results of this study were as follows : 1. In the asymmetry group, the correlation between the degree of mandibular deviation and that of 3-dimensional dental asymmetry was not so high. 2. In the asymmetry group, the teeth in deviated side were more laterally positioned than that of undeviated side. There were differences in the anteroposterior position of maxillary 1st and 2nd molars and the angulation of maxillary central incisors. 3. In the asymmetry group, the transverse asymmetry was larger in the posterior teeth rather than in the anterior teeth and larger than the anteroposterior asymmetry.

• The Journal of Engineering Geology
• /
• v.11 no.1
• /
• pp.1-11
• /
• 2001

The geological characteristics of Korea are that we can encounter the rock layer only after 10m of excavation, methods to presume the rock pressure distribution of the rock layer is urgently needed. When using the existing empiric science of Terzaghi-Peck, Tschebotarioff to measure the rock pressure of the rock layer, underestimate the real strength because of the cohesion is ignored. Therefore calculating the horizontal sliding force of wedge block, which includes the dips and shear strength of discontinuities and surcharge load etc., think to be to getting a closer rock stress of the real rock pressure acting upon the earth structure in rock mass. This research use Coulomb soil pressure theory assuming that the backfill soil will yield wedge failure when it has cohesion, applying Prakash-Saran(l963), and then it uses equilibrium of force and shear strength $\tau$=c+$\sigma$tan $\Phi$ of the cliscontinuities. Analyzing shear strength and dips of cliscontinuities using calculated theory according to the status of discontinuities aperture, we were able to find out that because the cohesion and friction angle of the rock layer itself is large enough, how the dip directions and dips facing the excavation face is the only factor deciding whether or not the rock stress is applied. The evaluated theory of this research should be strictly estimated, so that the many parameters such as c, $\Phi$value, types and structures of rock class, excessive lateral pressure, dynamic load, earthquake, needed later when calculating shear strength of discontinuities and especially the ground water effect acting on rock layer should be coumpted with many measuring data achieve at the insite to study the application.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.273-285
• /
• 2000

The aim of this investigation was to evaluate the differences of two canti-leyer springs by using a new simulation system. This was done using a Calorific machine that compared iron uprighting spring and root uprighting spring. The Calorific machine was designed to allow observation of the whole process of tooth moving, and is composed of three parts(a temperature regulating system, electro-thermodynamic teeth, and an artificial alveolar bone component). The experiment of both mechanics were repeated five times and measured two times. The intra-examiner agreement and inlet-examiner agreement were $96.54\%\;and\;95.73\%$ and these data were statistically tested by paired t-test. The obtained results were as follows. 1. Distal and buccal movement of the anchor teeth were observed greater in the root uprighting spring than the crown uprighting spring. 2. Crown uprighting spring showed distal movement of the crown of lower second molar for 3.29mm but root uprighting spring showed only 1.68mm. 3. Crown uprighting spring exhibited forward movement of mesial and distal root of the lower second molar for 3.91mm, 3.60mm but the root uprighting spring showed 6.76mm, 6.26mm.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.97-105
• /
• 2001

In many cases of orthodontic treatment the upper anterior teeth are retracted. Periodontal problems may arise during incisor retraction, if the amount of tooth movement and the amount of remodeling in the anterior cortical bone are not the same. Therefore in this study, to find out the relationship between the amount of tooth movement and the amount of bone remodeling during retraction of the upper anterior teeth, lateral cephalograms of 56 female patients over 18-year-old were taken before and after treatment. Among the 56 patients, two groups were divided according to the type of root movement during retraction. 26 patients mainly moved by tipping and 30 by bodily movement. The cephalograms taken before and after treatment were superimposed upon the true horizontal plane. In the Tip-Group, the horizontal bone remodeling/tooth movement ratio was 1:1.63, and in the Torque-Group it was 1:1.66. Because the amount of tooth movement and the amount of bone remodeling were not the same in both groups, in the Tip-Group the root apex moved away from the palatal cortical plate and closer to the labial cortical plate, whereas in the Torque-Group the root moved away from the labial cortical plate and closet to the palatal cortical plate. Therefore, there are limitations in the amount of incisor retraction in patients with a very thin anterior cortical plate in the maxilla, and in patients with severe skeletal discrepancies orthognathic surgery should be considered and when orthodontic camouflage treatment is the only possible method, the orthodontist must be aware of the limitations of treatment.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.563-573
• /
• 1999

The purpose of this study was to evaluate the availability of computer system for the measurement of tooth size in the model analysis through the comparison of two measurements: One was to use a computer; and the other was to use vernier calipers. Twenty sets of casts were used, which showed a moderate degree of crowding and full eruption of all teeth. The mesio-distal width of 12 teeth from the left central incisor to the left first molar at each set of the casts were measured twice with vernier calipers and a computer respectively. This measurement was repeated two weeks later. First, for the reproducibility analysis, the two computer measurements were compared then the vernier calipers measurements were compared. Second, all the teeth were sepapated into the region of mesiodistal contact points and its width was measured by a micrometer to obtain standard measurements. For the accuracy analysis, these standard measurements were compared with the measurements from the dental casts using two methods. The difference between them was defined as the measurement error. To investigate the cause of measurement error, an examination was made for the presence and degree of contact point deviation on each tooth from the upper and lower occlusograms, and the mesio-distal angulation of each tooth was measured with TARG. Following results were obtained through statistical analysis. 1. In the analysis for reproducibility; the measurements with vernier calipers showed significant differences in three out of twelve teeth while the computer measurements showed significant differences in one out of twelve teeth. 2. In the analysis for accuracy; compared with the standard measurements, the measurements with vernier calipers showed significant differences in three out of twelve teeth while the computer measurements showed significant differences in two out of twelve teeth. 3. Compared with the standard measurements, the measurements with vernier calipers were apt to be larger at the upper first molar, and smaller at the lower first molar The computer measurements, however, were apt to be larger at both upper and lower first molars. 4. The measurements with vernier calipers showed the largest error at the lower first molar and the degree of error was variable according to the tooth while the difference of error was small in the computer measurements. 5. In the analysis for the correlation of the degree of measurement errors with the contact point deviation index and the mesio-distal crown angulation of each tooth, the measurements with vernier calipers did not show significant correlation while the measurements with computer showed slight Positive correlations. The results of this study indicate that a computer system may be useful for the measurement of tooth size in the model analysis.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.855-864
• /
• 1998

The purposes of this study were to evaluate the cephalometric characteristics of Korean female patients with Class II division 2 malocclusion and to compare Korean females with Caucasian females who had same type of malocclusion. All of the samples had Class II division 2 malocclusion with deep overbite (more than 4mm) and full permanent dentition. These samples were divided into two groups according to the races: Group 1(N=16; Korean females; average age=18Y 2M) and Group 2 (N:20; Caucasian females; average age=14Y 2M). The pretreatment lateral cephalograms were measured, analyzed and compared by using 38 variables and independent t-test. And the results were as follows: 1. Although there were no differences in Overbite, SN to mandibular plane angle, Palatomandibular plane angle, and FMA between Group 1 and 2, the other vertical relation variables of maxilla and mandible (SN to palatal plane angle, SN to occlusal plane angle, ODI) of Group 1 showed more clockwise rotation tendency of occlusal plane and less hypodivergency tendency than those of Group 2. 2. There were no differences in mandibular body length and ramus height between Group 1 and 2 except small upper genial angle of Group 1. There was less counterclockwise rotation tendency of mandible in Group 1. 3. There were no statistical significant differences in UAFH/LAFH and PFH/AFH between Group 1 and 2. 4. Although there were no differences of overjet and anteroposterior position of mandible between Group 1 and 2, the position of maxilla of Group 1 was more retropositioned than that of Group 2. 5. Except the more protrusion of lower incisor to A-Pog of Group 1, there were no differences of inclination and distance of upper and lower incisors to basal plane between Group 1 and 2. 6. The distance from upper- first molar to palatal plane showed no difference between Group 1 and 2. But the distance from lower first molar to mandibular plane of Group 1 was greater than that of Group 2. So it may be partially related to the clockwise rotation of occlusal plane and the less counterclockwise rotation tendency of mandible of Group 1. 7. Group 1 had more protrusive upper and lower lips than Group 2.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.303-315
• /
• 1999

The aim of this study was to evaluate the morphology of the mandibular symphysis and anterior alveolar and skeletal relationship under the influence of the rotational growth pattern of mandible in skeletal Class III malocclusion. A total of U untreated adult subjects were divided into two groups-forward rotational growth pattern group, backward rotational growth pattern group-according to the suggestion of Skieller et al.. The antero-posterior position, vertical relationship, mandibular symphysis and anterior alveolar and skeletal relationship were assessed on lateral cephalometric radiographs. Mandibular symphysis and anterior alveolar and skeletal relationship in each subject were studied and the following conclusions were drawn : 1. Concerning the antero-posterior position, forward rotational growth pattern group showed significantly larger SNA, SNB. Conceming the vertical relationship, all measurements showed statistically significant differences. 2. Forward rotatioal growth pattern group showed significantly larger IMPA, MnAD, backward rotational growth pattern group showed significantly larger MxABH. 3. There was no statistically significant difference in symphysis ratio to mandibular plane between forward and backward rotational growth pattern group. 4. In the correlative analysis of rotational growth pattern of mandible and mandibular symphysis, anterior alveolar and skeletal relationship, statistically significant correlations in overbite, IMPA, MnAD, symphysis width were showed.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.247-261
• /
• 1995

The purpose of this study was to quantitate differences in the nature of the correction of Angle's Class II div 1 malocclusion dependent on the patient's age at the time of treatment. The sample consisted of 27 female patients in the adolescent group with a mean initial records age of 11.8 years and 25 female patients in the adult group with a mean starting age of 21.1 yrs. Lateral cephalometric head films were taken before and after orthodontic treatment with four bicuspid extraction. The results were obtained as follows. 1. None of maxillary skeletal parameters exhibited a significantly different in treatment change between adolescents and adults. But, in mandibular skeletal measurements, there were significant differences between two groups. (P<0.05) 2. Measures of vertical dimension in the adults remained unchanged during treatment, reflecting the effective absence of growth. 3. The steepness of occlusal plane in the adults changed significantly.(P<0.05) In contrast, the adolescents displayed stability of the occlusal plane. 4. According to the Johnston analysis, there was a significant difference in the total molar correction between two groups.(P<0.05) 5. According to the Johnston analysis, differential mandibular growth in the adolescents contrubuted $63\%$ of the total molar correction, with orthodontic tooth movement accounting for the remaining $37\%$. In the adults, dental movement comprised $99\%$ of the correction.