• Title/Summary/Keyword: 경사경계조건

Search Result 138, Processing Time 0.032 seconds

The Stability Analysis Method with the Failure Shape in Cutting Slopes (절취사면에서의 파괴형태에 따른 안정해석방법)

  • Kang, Yea Mook;Chee, In Taeg;Kim, Yong Seong;Kim, Ji Hoon
    • Korean Journal of Agricultural Science
    • /
    • v.25 no.1
    • /
    • pp.97-106
    • /
    • 1998
  • This study was carried out to investigate the problem of analysis method of circular sliding, which uses a high rate to work out a countermeasure for landslides. The results of this study were summarized as follows : 1. As a result of the analysis of sliding surface along the soil layers in forty model slopes, the boundary layer in weathered soil and weathered rock indicated a very high possibility of sliding than in other places. 2. Because most landslides in Korea occur along the discontinuity face at the boundary of soil layers, below 2m. from land surface, it is a good method for safe design to work the countermeasure for these kinds of landslides in cutting slopes. 3. When the inclination of slopes is fixed and the length of slopes is changed, the cercular sliding slopes were more safe as the soil layers are more shallow and the length of slopes are shorter, but the safety ratio of infinite sliding slopes was same as the other even though their length of slopes was different. 4. As a result of the analysis by cercular sliding analysis method and infinite sliding analysis method with some condition that the inclination of slopes was $30^{\circ}$ degree, because most landslides in Korea occur at this condition, these methods indicated different results to each other as well as cercular sliding analysis method showed too much safety ratio than infinite sliding analysis method.

  • PDF

Tectonic Structures and Hydrocarbon Potential in the Central Bransfield Basin, Antarctica (남극 브랜스필드 해협 중앙분지의 지체구조 및 석유부존 가능성)

  • Huh Sik;Kim Yeadong;Cheong Dae-Kyo;Jin Young Keun;Nam Sang Heon
    • The Korean Journal of Petroleum Geology
    • /
    • v.5 no.1_2 s.6
    • /
    • pp.9-15
    • /
    • 1997
  • The study area is located in the Central Bransfield Basin, Antarctica. To analyze the morphology of seafloor, structure of basement, and seismic stratigraphy of the sedimentary layers, we have acquired, processed, and interpreted the multi-channel seismic data. The northwest-southeastern back-arc extension dramatically changes seafloor morphology, volcanic and fault distribution, and basin structure along the spreading ridges. The northern continental shelf shows a narrow, steep topography. In contrast, the continental shelf or slope in the south, which is connected to the Antarctic Peninsula, has a gentle gradient. Volcanic activities resulted in the formation of large volcanos and basement highs near the spreading center, and small-scale volcanic diapirs on the shelf. A very long, continuous normal fault characterizes the northern shelf, whereas several basinward synthetic faults probably detach into the master fault in the south. Four transfer faults, the northwest-southeastern deep-parallel structures, controlled the complex distributions of the volcanos, normal faults, depocenters, and possibly hydrocarbon provinces in the study area. They have also deformed the basement structure and depositional pattern. Even though the Bransfield Basin was believed to be formed in the Late Cenozoic (about 4 Ma), the hydrocarbon potential may be very high due to thick sediment accumulation, high organic contents, high heat flow resulted from the active tectonics, and adequate traps.

  • PDF

Two-D fluid analysis at flow runoff in the dry stream, Jeju island (제주도 건천의 홍수유출시 2차원 흐름해석)

  • Yang, Won-Seok;Yang, Sung-Kee;Kim, Dong-Su
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.587-587
    • /
    • 2012
  • 현재 대부분 하천관리의 흐름해석에서 주가 되었던 1차원 분석은 하천 단면에 따른 횡적인 수면차, 유속분포를 분석할 수 없다는 단점을 가지고 있으며, 특히 유량 및 유속이 급속도로 늘어나는 홍수시에는 그 오차가 더욱 커질 수 있다. 반면에 2차원 모형의 흐름해석은 사행하천의 흐름 특성과 만곡부에서의 종 횡방향 수면경사 및 양안의 수면차와 합류지점의 횡방향 흐름 등의 영향을 고려할 수 있으며 1차원 해석과는 달리 전 단면에 걸쳐 유속 및 수위 분포를 나타낼 수 있어 실제흐름에 가까운 수리량을 얻을 수 있다. 본 연구를 위해 적용된 해석모형인 SMS는 미국 Brigham Young 대학의 환경모형연구실과 미공병단(USACE)의 수로실험국(WES) 등에서 개발한 프로그램으로서 RMA2, RMA4, SED2D 모형 등으로 구성되어 있다. 각각의 모형은 수리 동역학적 해석, 오염물 이송확산 해석, 유사의 이송 및 퇴적 해석이 가능하며 이 중 RMA2를 이용한 2차원 흐름해석을 통하여 보다 적합한 하천관리에 이용가능하도록 하고자 한다. 연구대상 지역은 제주도 한천 하류부로서 제주도 하천 특성상 평상시 건천의 상태를 이루고 있으나 태풍 및 집중호우시 홍수유출이 발생하여 수위가 급격하게 상승하는 양상을 보인다. 대표적인 예로 태풍 '나리'시 최대 일강우량 420mm로 인한 인근 지역에 0.5 ~ 1.5m의 침수흔적을 보이고 있다. 본 연구에서는 2011년 최고수위를 기록한 태풍 '무이파'를 대상으로 하였으며 대상지역의 Kalesto를 이용한 수위-유속 자료를 이용하여 산출된 유량을 경계조건으로 사용하였고 격자망 형성을 위한 지형 데이터는 지형도 및 측량자료를 이용하여 구축하였다. 사용된 대표적인 매개변수는 하상의 조도계수를 나타내는 Manning의 n값과 유체의 밀도, 속도구배, 구조 등 여러 가지의 유체조건에 따라 변하는 성질인 와점성계수(eddy viscosity)로 요약할 수 있으며 Manning의 n값은 하천설계기준에 따른 하천기본계획의 조도계수를 사용하였고 와점성계수는 적합한 흐름 분포를 결정하기 위해 흐름이 안정될 때까지 변화시켜 해석을 시행하였다. 해석결과 만곡부에서는 급한 흐름을 보이고 있으며 최대하폭 구간에서는 완만한 흐름이 나타나 사행하천의 흐름특성과 횡적인 하천단면에 따른 변화, 하상고 차이로 인한 유속분포를 확인할 수 있으며 이는 보다 유용한 하천관리에 이용가능할 것으로 사료된다.

  • PDF

Numerical Simulation of Flow and Bed Change at the Confluence of the Geum River and Mihocheon (합류부에서 흐름 및 하상변동 수치모의 (금강과 미호천 합류부를 중심으로))

  • Jang, Chang-Lae;Kim, Jeongkon;Ko, Ick Hwan
    • Journal of Wetlands Research
    • /
    • v.8 no.3
    • /
    • pp.91-103
    • /
    • 2006
  • The objective of this study is to analyze the characteristics of flow and bed change at the wide, shallow confluence of the Geum river and Mihocheon, which has different bed slope, height, and sediment concentration condition between the main channel and tributary. RMA-2 and SED2D were used to simulate flow and bed changes at the site. Flow simulations showed that the overall flow velocity, shear layer and vortex generated at the left bank of the confluence increase as the discharge was increased. Sediment transport simulations indicated that because of the high inflow sediment concentration from Mihocheon, sediment concentration in the main river increases after the confluence, the high sediment concentration band was kept along the shear layer boundary and the left bed was aggraded after confluence.

  • PDF

Heat of Hydration and Thermal Crack Control for Floating Concrete Mass Foundation (부상식 매스콘크리트 기초의 수화열 관리 및 온도균열 제어)

  • Rhee, In-Kyu;Kim, Kwang-Don;Kim, Tae-Ook;Lee, Jun-Seok
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.14 no.1
    • /
    • pp.156-164
    • /
    • 2010
  • A total of 6 stepwise constructions were made for building the floating mass concrete foundation. The optimal curing strategies and specialized construction guidelines were adoptively extracted from the 1.5m cube mock-up test prior to the main concrete work. Two different thermal crack index(TCI) calculations from current construction manual exhibit relatively low values as comparing the measured temperature data. This implies that the hydration-induced cracking could be developed in parts of concrete mass. However, the controversial phenomenons in reality were observed. No significant surface cracks are detected at the successive construction stages. Thereby, this paper raises the question regarding on the existence of characteristic length with varying size and shape of a target specimen which are missing in the current construction manual. The isothermal core area and high thermal gradient area in the edge volume should be identified and be introduced to TCI calculation for the purpose of an accuracy.

The Degradation Characteristics Analysis of Poly-Silicon n-TFT the Hydrogenated Process under Low Temperature (저온에서 수소 처리시킨 다결정 실리콘 n-TFT의 열화특성 분석)

  • Song, Jae-Yeol;Lee, Jong-Hyung;Han, Dae-Hyun;Lee, Yong-Jae
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.9
    • /
    • pp.1615-1622
    • /
    • 2008
  • We have fabricated the poly-silicon thin film transistor(TFT) which has the LDD-region with graded spacer. The devices of n-channel poly-si TFT's hydrogenated by $H_2$ and $H_2$/plasma processes were fabricated for the devices reliability. We have biased the devices under the gate voltage stress conditions of maximum leakage current. The parametric characteristics caused by gate voltage stress conditions in hydrogenated devices are investigated by measuring/analyzing the drain current, leakage current, threshold voltage($V_{th}$), sub-threshold slope(S) and transconductance($G_m$) values. As a analyzed results of characteristics parameters, the degradation characteristics in hydrogenated n-channel polysilicon TFT's are mainly caused by the enhancement of dangling bonds at the poly-Si/$SiO_2$ interface and the poly-Si grain boundary due to dissolution of Si-H bonds. The structure of novel proposed poly-Si TFT's are the simplicities of the fabrication process steps and the decrease of leakage current by reduced lateral electric field near the drain region.

Aquatic Plant Restortaion by Mattress/Filter System in Stagnant Stream Channel (정체수역에서의 Mattress/Filter에 의한 수생식물 복원)

  • Yeo Woon Ki;Cho Seung Ho;Jee Hong Kee;Lee SoonTak
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.1393-1397
    • /
    • 2005
  • 홍수유출을 저감시키기 위해서 유역의 저류기능을 강화시킬 수 있는 댐 건설은 이수적인 측면에서 안정적인 용수공급을 보장해주는 수단으로 겸용되어 왔으며, 특히 다목적댐이 건설되면서 하도의 첨두홍수유출량을 줄이는데 크게 기여해 왔다. 하지만 그로 인해 물의 흐름이 막히는 정체수역이 증가하고 있으며, 생활오수, 산업폐수의 발생은 정체수역에서의 영양염류 부하량을 증가시켜 부영양화를 초래하고 있다. 수생식물은 태양빛을 받아 광합성 작용을 하여 수중에서 성장하면서 수중의 유$\cdot$무기물질을 영양소로 섭취함으로써 수질을 정화시키는 작용을 하게 된다. 영양염류 부하량이 큰 정체수역의 오염된 물은 식물의 성장활동에 의해서 어느 정도 정화시킬 수 있으며, 이와 같이 수중에 식물을 식재하기 위해서는 식물이 하상에 쉽게 그리고 지속적으로 성장하고 번식활동을 할 수 있는 여건이 필요하다. 따라서 본 연구에서는 Mattress/Filter를 정체수역에 설치함으로써 이러한 식물의 성장과 번식을 도와줄 수 있는 환경조건을 제안하였다. 연구결과, Mattress에 식재한 갈대, 줄 및 애기부들의 피도는 $60-80\%$ 정도로 나타났다. 각 Mattress의 식물군집에는 초기 식재한 식물의 우점도가 가장 높았으나 갈대와 줄 군락의 경우 다른 종이 많이 출현하는 것으로 나타났다. 갈대 군락에서는 갈대가 크게 우점하였으나 그 외에 돌피, 하늘지기, 여뀌바늘 등이 우점하는 것으로 나타났다. 또한 줄 군락에서는 역시 줄이 크게 우점하였으나 방동사니, 돌피, 조개풀 등이 출현하였다. 애기부들 군락에서는 애기부들외에 세모고랭이와 미국가막사리 두가지 종만 출현한 것으로 나타났다. 갈대와 줄 군락의 출현 종수는 각각 7과 11이었으며, 다양도지수가 1.67, 2.18로 식물다양성이 크게 증가한 것으로 나타났다. 수질은 BOD 10mg/L, TN 15mg/L, TP 2.0mg/L이하로 이를 유등천 상류부에 공급할 경우 유등천의 수질은 BOD 6.7mg/L, TN 9.80mg/L, TP 0.90mg/L를 나타낼 것으로 예측된다. 고도처리시설의 도입 후 금강 합류점에서 갑천의 예측 BOD는 7.4mg/L로 현재 9.0mg/L에 비하여 개선되지만 이는 금강수계 오염총량 관리계획의 시$\cdot$도 경계지점 목표수질인 5.9mg/L를 만족시키지 못하므로, 이를 만족시키기 위해서는 방류수 BOD 7.2mg/L이하로 처리해야 할 것으로 판단된다.which support only concepts or image features.방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고

  • PDF

Numerical study on flow characteristics at dividing open-channel with changing bifurcation angle using TELEMAC-2D (TELEMAC-2D모형을 이용한 분류각 변화에 따른 개수로 흐름특성변화 수치모의 연구)

  • Jung, Daejin;Jang, Chang-Lae;Jung, Kwansue
    • Journal of Korea Water Resources Association
    • /
    • v.53 no.8
    • /
    • pp.617-626
    • /
    • 2020
  • This study investigates changes of bifurcation discharge ratio, flow velocity distributions and characteristics of separation zone due to variation of bifurcation angle by using TELEMAC-2D model. When the bifurcation angle is reduced from 90° to 45° without changing the boundary conditions, the bifurcation discharge ratio increased by 1.5 times from 0.523 to 0.785 because of increasing the radius of curvatures, the inertia force of the downstream flow, and the pressure gradient by the downstream boundary conditions. The bifurcation discharge ratio increases non-linearly whenever the bifurcation angle decreases by 15° intervals from 90° to 45° in flow with the upstream Froude number of 0.45 to 0.74. In flow with a maximum Froude number of 0.74, the rate of increase for bifurcation discharge ratio is 31.1% and the minimum value. When the Froude number is 0.58, the bifurcation discharge ratio is 0.7 or less, and the maximum rate of increase for that ratio is 53.5%. As the upstream Froude number decreases less than 0.58, the bifurcation discharge ratio exceeds 0.7, and the rate of increase decreases. When the upstream Froude number is 0.4 higher, the dimensionless width and length changing ratio of the separation zone are about 2.56 and 5.5 times higher than in 0.4 or less.

Study of the Saemangeum District Flood Level after Completion of Saemangeum Master Plan (새만금종합개발계획 완료 후 새만금 지구 홍수위 검토)

  • Jeong, Seok Il;Ryu, Kwang Hyun;Lee, Seung Oh
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.248-248
    • /
    • 2018
  • 새만금 종합개발계획(정부, 2011)에 따른 내부개발의 완료시점은 2030년이며, 방수제 공사와 준설 등과 같이 만경강 및 동진강 유역 내 흐름을 변화시킬 수 있는 공사를 포함하고 있으므로 현재와 2030년의 하천 및 호의 수리특성은 다를 것이라 예상된다. 2030년까지 준설상황 등을 예측하여 반영하는 것은 사실상 불가능하기 때문에 새만금 종합개발계획에서 제시하고 있는 내부개발의 완료시점을 기준으로 홍수사상을 모의하였다. 새만금 호의 물리적인 변화는 수리특성의 변화로 이어질 수 있으며, 이는 상류지역으로 전파가 될 수 있으므로 호내 뿐만 아니라 만경강과 동진강 전역에 대한 홍수시의 수리특성을 검토하였다. 새만금 호와 연결된 만경강과 동진강의 설계홍수량은 대부분의 구간에서 100년 빈도이기 때문에 본 연구에서는 100년 빈도 홍수사상에 대한 분석을 기초로 홍수위 검토를 수행하였고, RCP8.5 시나리오를 적용한 100년 빈도 홍수량과 500년 빈도 홍수량에 대한 추가적인 연구를 수행하였으며, 이 결과를 토대로 취약지구 분석 및 대책 등을 제시하였다. 수치모의는 Delft3D를 이용하였으며, 새만금 유역의 동진강 지구의 실측치와 비교함으로써 모델의 적용성을 검증하였다. 서해안 조위 특성상 새만금 방조제는 조위 영향이 크므로, 이에 본 연구에서는 외조위의 특성을 고려하기 위해 새만금 유역 주변의 12개 조화상수(tidal harmonic constant)를 이용하여 조위에 대한 모의를 별도로 수행하고, 이 결과를 배수갑문의 경계조건으로 이용하였다. 상류 경계조건은 하천기본계획상에 제시된 하천은 이를 이용하였으며, 그 외의 소하천은 유역면적을 이용한 계산법을 사용하여, 선형적 면적 비유량(Specific Discharge, SD) 방법을 적용하여 본류의 유량에 부가하는 방식으로 수행하였다. 수치해석 결과, 준설 구간의 수위는 전반적으로 저하되었으며, 거리에 따른 수면의 경사를 분석한 결과 기존의 하천구역이 준설 등으로 인하여 호수의 특성으로 변화된 것으로 확인하였다. 본 연구에서 취약지구는 홍수위가 제방고의 약 80% 이상 되는 지역으로 결정하였으며, 이를 토대로 취약지구 분석을 수행한 결과 기존 100년 빈도에서 1지점, RCP 8.5 시나리오가 적용된 100년 빈도에서 88지점, 500년 빈도에서 125지점이 잠재적인 치수 위험이 있는 것으로 파악되었다. 기존의 1차원 연구결과와는 차이가 있는 부분은, 다수의 취약지구가 만곡부 또는 합류부 인근에 위치한 것이다. 향후 이러한 상대적인 치수 취약지점에 대해 정밀하고 국부적인 연구를 수행하여 정확한 홍수위 예측을 수행해야 할 것이다.

  • PDF

A Study on Real-time Tracking Method of Horizontal Face Position for Optimal 3D T-DMB Content Service (지상파 DMB 단말에서의 3D 컨텐츠 최적 서비스를 위한 경계 정보 기반 실시간 얼굴 수평 위치 추적 방법에 관한 연구)

  • Kang, Seong-Goo;Lee, Sang-Seop;Yi, June-Ho;Kim, Jung-Kyu
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.48 no.6
    • /
    • pp.88-95
    • /
    • 2011
  • An embedded mobile device mostly has lower computation power than a general purpose computer because of its relatively lower system specifications. Consequently, conventional face tracking and face detection methods, requiring complex algorithms for higher recognition rates, are unsuitable in a mobile environment aiming for real time detection. On the other hand, by applying a real-time tracking and detecting algorithm, we would be able to provide a two-way interactive multimedia service between an user and a mobile device thus providing a far better quality of service in comparison to a one-way service. Therefore it is necessary to develop a real-time face and eye tracking technique optimized to a mobile environment. For this reason, in this paper, we proposes a method of tracking horizontal face position of a user on a T-DMB device for enhancing the quality of 3D DMB content. The proposed method uses the orientation of edges to estimate the left and right boundary of the face, and by the color edge information, the horizontal position and size of face is determined finally to decide the horizontal face. The sobel gradient vector is projected vertically and candidates of face boundaries are selected, and we proposed a smoothing method and a peak-detection method for the precise decision. Because general face detection algorithms use multi-scale feature vectors, the detection time is too long on a mobile environment. However the proposed algorithm which uses the single-scale detection method can detect the face more faster than conventional face detection methods.