• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.125-130
• /
• 2013

According to the law revision of TPMS mounting obligations in Korea, researches about energy harvester which is the alternative of the battery are actively performed by many groups. Because WSN (Wireless Sensor Network) has the proposition of "Install and forget" and the power supplier also has the same performance as the vehicle's lifetime. In this paper, electromagnetic induction type of energy harvester through the relative motion between the rotating wheel and the fixed brake disc is introduced by using the most efficient source as the rotating motion in the view of vehicle's mechanism. The coil on the wheel and the permanent magnet at the brake disc are arranged in several ways. These various arrangements are the number of coil turns are consisted of design variables. By using the orthogonal array to reduce the experimental cost, the optimal composition is verified through the experiment. Finally the validity of the module is considered by measuring the level of storable electrical energy.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.995-1009
• /
• 2015

Weather radar rainfall data has been recognized for making valuable contributions to short-term flood forecasting and management over the past decades. There are several advantages to better monitoring rainfall in ungauged area compared to ground-based rain gauges with which spatial patterns of the rainfall are not effectively identified. Hence, this study aims to develop a new scheme to forecast spatio-temporal rainfall field. The proposed model was based on an advection scheme to track wind patterns and velocity. The results showd a promising forecasting skill with quantitative and qualitative measures. It was confirmed that the forecasted rainfall may be effectively used an input data for a distributed hydrological model.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.266-273
• /
• 2010

The main function of the power conditioning system (PCS) is grid-connection with renewable system. The level of total harmonic distortion(THD) caused by the PCS should be maintained less than 5% according to the IEEE-1547 regulation. The THD is measured by the dedicated instrument, not by the PCS in the domestic products. There should be the necessity for harmonic measurement by the PCS in order to cope with degradation or fault condition. In this paper, the real-time harmonic measurement technique using highperformance DSP controller is presented. The proto-system is manufactured using 32-bit floating DSP processor and tested with 256-point DFT(Discrete Fourier Transform) algorithm. The test result shows that the harmonic calculation time is less than 1 [ms]. It can be used as a auxiliary method for predicting the fault in the PCS system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.356-356
• /
• 2017

최근 국토교통부 홍수통제소에서는 가뭄대응을 위해 1, 3개월 갈수예보를 시범적으로 운영하고 있다. 국가재난 위기경보단계(관심, 주의, 경계, 심각)에 따라 분류된 기준유량과 예측유량의 비교를 통해 갈수상황을 판단하며, 그 중 기준유량은 일본의 정상유량 산정 기법에 의해 계산된다. 그러나 우기 건기에 따라 상이한 유입량 및 물 사용량이 정상유량 산정에 고려되지 않았고, 각 위기단계별 물 부족상황이 재현되지 못하였다. 또한, 하천유량 부족은 가뭄과 관계가 밀접함에도 불구하고, 가뭄상황과의 연계분석이 이뤄지지 않았다. 본 연구에서는 갈수빈도와 정상유량산정 모델을 이용하여 기준유량을 재설정하고 가뭄상황을 분석하였다. 대상유역은 영산강유역으로 선정하였고, 보고된 하천수사용허가량, 댐 용수 공급량 및 10년 이상 장기간 관측된 관측소별 일 유량자료를 활용하였다. 일 관측유량을 7일 이동평균으로 변환한 후, 유황분석을 통해 $Q_{90}$을 산정하였으며, 빈도별 $Q_{90}$을 계산하였다. 정상유량 산정 모델에서 입력 자료(자연유량, 댐 공급량 및 하천수 허가량)에 가중치를 두어 양을 조절하고 각 빈도에 맞는 관개기 및 비관개기 기준유량을 산정 하였다. 가뭄지수로는 국내 활용성이 높은 Standardized Precipitaion Index (SPI) 및 Standardized Runoff Index (SRI)를 선정하였고, 이를 지속기간 1, 3, 6, 12개월에 따라 일별로 계산하였다. 7일 평균 관측유량이 기준유량 이하일 때, 이시점을 전 후로 가뭄지수의 시공간적 특성과 가뭄의 지속기간 및 심도를 분석하여 가뭄상황을 제시하였다. 본 연구의 결과는 갈수예보 시 하천유량 부족에 따른 물수지 및 가뭄상황에 대한 직관적인 판단과 갈수기 효율적인 하천수 조정 협의에 기여할 것으로 본다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.147-156
• /
• 2011

The purpose of multipurpose reservoir operation in flood season is to reduce the peak flood at a control point by utilizing flood control storage or to minimize flood damage by controlling release and release time. Therefore, the most important thing in reservoir operation for flood season is to determine the optimal release and release time. In this study, goal programming is used for the optimal reservoir operation in flood season. The goal programming minimizes a sum of deviation from the target value using linear programming or nonlinear programming to obtain the optimal alternative for the problem with more than two objectives. To analyze the applicability of goal programming, the historical storm data are utilized. The goal programming is applied to the reservoir system operation as well as single reservoir operation. Chungju reservoir is selected for single reservoir operation and Andong and Imha reservoirs are selected for reservoir system operation. The result of goal programming is compared with that of HEC-5. As a result, it was found that goal programming could maintain the reservoir level within flood control level at the end of a flood season and also maintain flood discharge within a design flood at a control point for each time step. The goal programming operation is different from the real operation in the sense that all inflows are assumed to be given in advance. However, flood at a control point can be reduced by calculating the optimal release and optimal release time using suitable constraints and flood forecasting system.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.368-375
• /
• 2014

Brain computer interface(BCI) technology has been continuously developed due to the continuous development of interface technology and the promotion of brain wave research. In this paper, we propose a driving habit management system by adopting BCI to transportation. The proposed system consists of the electroencephalogram(EEG) measuring unit, the EEG analysis unit, the memory section for storing the state information of drivers, the speed controller unit and the alarming section for generating warnings. Our proposed system can reduce the drowsy driving, improve the driving habits of users and help to prevent traffic accidents.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.1
• /
• pp.100-110
• /
• 1994

레이다 신호는 대표적인 전자파 신호로서 주변환경에 따라 시간, 주파수, 공간 영역에서 고유한 신호특성을 가지고 있으며, 신호처리 기법도 다양하다. 본 논문에서는 먼저 레이다를 위한 전파 신호처리 의정의와 필요성을 언급한뒤, 레이다 신호환경 특성을 살펴보고 신호처리를 위한 신호의 시간 및 스펙트럼 특성에 대해 기술하였다. 그리고, 신호특성에 적합한 신호처리기의 구현을 위해 레이다 신호처리에 관 련된 주요 기법에 대해 개괄적으로 설명하였다. 레이다 신호처리 분야는 일반적으로 잘 알려진 음성이 나 영상신호처리 분야와 달리 고유한 알고리듬과 구조가 요구된다. 신호처리기법으로서 레이다 파형설 계, 해상도 모호성, 펄스압축, 클러터제거, 도플러처리, 일정오경보탐지, 클러터 지도, 표적군 형성/ 추출, 표적식별, 레이다영상기법, 적응배열처리 등에 관해 개괄적으로 설명하였다. 레이다 선호처리 기술은 "스마트"한 레이다를 위한 두뇌 역할을 하기때문에 그 필요성과 중요성이 증가하고 있다. 그러나, 고속, 대용량의 신호를 주어진 빔 주사시간동안에 실시간으로 처리하여 표적 정보를 추출해야 하기 때문에 아직도 상용 프로세서의 속도 한계내에서 알고리듬의 수행에 다소 제약을 받고 있으나, 최근 디지탈 신호처리 전용의 고속 칩의 출현으로 많은 발전을 가져오고 있다. 끝으로, 향후 레이다 신호처리 발전 추세와 응용분야에 대해 살펴보았다. 응용분야는 군수 및 민수용의 겸용 파급효과가 매우 크고, 군용의 대공탐색 및 조기경보, 전장감시뿐만 아니라 전투기 탑재용으로 필수적이며, 특히 민수용의 공 항, 항공기, 선박, 위성 등 매우 다양하다. 최근 발전추세에 따른 기술로서 다중모드 신호처리, 고집적 회로기술, 적응배열, 디지탈 빔형성, 적응성, 고분해능 및 방향성, 표적식별, 다차원 신호처리에 대해 언급 하였다.

• Fire Science and Engineering
• /
• v.23 no.2
• /
• pp.41-48
• /
• 2009

In this paper, to overcome the limitation of the existing wired fire sensors and alert facilities, the real-time temperature data collected from the fire detectors applied USN is analyzed the time series and spacial features of temperature inside building using the GIS spatial modeling method. Resulting from the analysis of the distribution features by the spacial location and time series, the temperature sensors applied USN is installed by the consideration of the spacial structures features. This paper will suggest the objective and practical guideline of installation of fire sensors applied USN.

• Fire Science and Engineering
• /
• v.23 no.2
• /
• pp.1-5
• /
• 2009

We studies wish to investigated establishment form of cabinet board, and confirm possibility of electrical disaster prevention through reappearance experiment of odor detection system. Established breaker consists of MCCB, RCD order in cabinet board for house, but industry is used together with. When imposed shock using shaker to terminal block that contact becomes in appropriate, flame was made sure. According to result that experiment attaching odor capsule in terminal block, capsule commissioned exactly by occurred heat. According to establishment position of sensor, difference of inspection time was about 10 seconds. Estimate odor inspection system by thing which electrical device accident prevention is available. When there is abnormal generated heat in connection of electric wire, accident prevention estimates that is possible by giving an alarm state of overheat to administrator.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.15 no.2
• /
• pp.55-60
• /
• 1979

The forming and design method of single power factor meter is suggested and the sensitive phase angle detect circuit of current and voltage of load was dealt with. In this paper, in order to control and detect of phase angle of the current and voltage, operational amplifier comparator circuit and R-C phase shift circuit was used, and to detect the controlled voltage wave form, the transister chopper pair circuit was used. The test result of this power factor meter was good and reliable at the full range of power factor.