• Korean Journal of Ichthyology
• /
• v.21 no.4
• /
• pp.227-238
• /
• 2009

The egg development and morphological changes of larvae, juveniles and adults of Oryzias dancena were observed. Fertilized eggs were incubated at $25{\pm}1^{\circ}C$; the process of embryonic development was observed by light microscopy and based on diagnostic features of the developing embryos. The average time to hatch was 11 days after fertilization. The hatched larvae averaged $4.40{\pm}0.24mm$ in total length (TL). The yolk sacs of the larvae were almost absorbed at 3 days after hatching and $4.55{\pm}0.23mm$ TL. At 21 days after hatching, the larvae were $7.23{\pm}0.73mm$ TL and had reached the juvenile stage. First ovulation was about 9 weeks after hatching and at $22.58{\pm}2.73mm$ TL.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.372-379
• /
• 2007

The converter slag can be used to remove phosphate ion into the form of solid state from the wastewater. This research aims to evaluate the change of pH, alkalinity, leaching of positive ion in the wastewater and the removal of phosphate from the initial condition of wastewater. The change of pH was abruptly increased upto pH 11 for the initial condition of pH from 7.0 to 8.5 fer 0.5 unit of pH. The alkalinity was steadily increased from 10 hours of reaction time not same as pH increase. The removal of phosphate was very effective till 10 hours of reaction then it was slow after that time. The positive ion, magnesium ion was leached from the concentration of 2.0 mg/L to 4.3mg/L at the reaction time of 27 hours and 36 hours. Therefore, converter slag can be used to remove the phosphate in the form of Struvite from the wastewater.

• The Korean Journal of Zoology
• /
• v.23 no.3
• /
• pp.115-123
• /
• 1980

The rates of escision repair at various doses and times after MNNG treatment in CHO cells were compared with the frequencies of chromosome aberrations to determine a possible relation between there two types of biological phenomena, and the results obtained were as follows: 1. the MNNG-induced excision repair was dose-dependent in te ranges between $0.5 \\times 10^-5$M. The maximum rate of excision repair was occurred in the cells soon after the treatment. The rates were then gradually decreased and appeared about 66% of 0 hour at 24 hours. 2. The rates of chromosome aberrations induced by MNNG was the highest at 6 hours, in which majority were chromatid deletions. The rates of chromatid deletions decreased, whereas chromatid exchanges increased with time, resulting is about equal rates at 24 hours after treatment. 3. The rates of excision repair at different times after MNNG treatment were roughly related to the total breaks per cell. The rates, however, did not show any relation to either chromatid exchanges or deletions. These results may suggest that excision repair may not be directly related to chromosome aberrations in MNNG treated CHO cells.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.04a
• /
• pp.43-43
• /
• 2003

잠란의 휴면 개시, 유지 및 각성 등에 따른 단백질의 변화를 알아보기 위해 2D-전기영동에 의한 peptides 분석을 하였다. 잠품종은 백옥잠을 사용하였으며, 단백질 분석은 산란 후 5일 경과란(휴면란), 산란 후 20시간에 침산하여 1일 및 2일 경과란, 및 산란 후 2일 경과 후 냉장(5$^{\circ}C$)처리하여 1일, 3일, 5일된 잠란을 각각 대상으로 하였다. 2D-전기영동은 1차로 pH3-10 range에서 isoelectric focusing 하고 2차로 SDS-PAGE한 후 silve stainin으로 peptides를 검출하였다. (중략)

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.280-283
• /
• 2005

한국원자력연구소 내 심부시추공(YS-01, 500m)에 설치된 다중패커시스템(multi-packer system)을 이용하여 양수(pumping) 시 GL. $-457.5{\sim}-500m$ 구간의 지하수에 대한 중요한 지화학 파라미터인 pH, 산화-환원전위, 용존산소 및 전기전도도 등을 장기간 측정하였다. 이에 따르면 현장측정자료는 시간이 경과함에 따라 변화되며 장시간이 경과된 후에 안정화됨을 보여주고 있다. 특히, 산화-환원전위의 경우는 10일이 경과되었음에도 계속 변화하고 있다. 심부지하수 뿐만 아니라 일반 지하수의 경우에도 이러한 파라미터 측정 시 안정화시간에 대하여 유의하여야 할 것이다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.187-191
• /
• 1998

DEVS(Discrete Event system Specification)형식론은 계층적이고 모듈화 된 형식으로 시스템을 설계함으로써 신뢰성 있는 모델링이 가능하도록 이론적으로 잘 정립된 시뮬레이션 방법론이다. 시뮬레이션의 진행과정 및 결과를 표현하기 위한 애니메이션 개발 환경에 있어서도 DEVS 모델의 구조를 반영하여 계층적 애니메이션 환경을 구현 할 수 있다. 계층적 애니메이션은 시뮬레이션 관찰자가 시스템의 특정 레벨에 맞추어 애니메이션 진행 상황을 볼 수 있도록 한다. 이는 일반적으로 시뮬레이션 애니메이션이 갖는 장점인 시스템 이해 및 모델의 신뢰성 검증의 향상 뿐 아니라, 다양한 관점에서 시스템의 변화를 확인 할 수 있다는데 그 필요성이 요구된다. 본 논문에서는 계층적인 애니메이션과 그래픽 표현이 가능하도록 하기위해 DEVS 모델의 구조를 반영한 계층성을 갖는 애니메이터(시뮬레이션과 애니메이션의 연결 프로세서)를 설계하였다. 이러한 애니메이터는 모델과 같은 구조로 각 모델에 필요한 애니메이션 객체들을 유지·관리함으로써 계층적 애니메이션을 가능하게 하며, 시뮬레이션의 이산적인 시각 경과와 애니메이션의 연속적인 시간 경과와 애니메이션의 연속적인 시간 경과 사이에 동기화를 용이하게 한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.130-130
• /
• 2017

비닐하우스의 골조를 구성하는 파이프는 부식을 방지할 목적으로 아연도강관을 사용한다. 그러나 시간이 지남에 따라 아연도금량 감소와 여러 외부 환경인자 등에 의하여 부식이나 침식이 진행되어, 외관상 녹이 생기고 강도와 연신율 등이 감소하게 된다. 이는 비닐하우스 전체의 내구성을 저하시키는 요인으로 작용하게 되는데, 이를 평가하기 위한 방법이나 기준은 미비한 실정이다. 이에 본 연구에서는 농업시설의 내구성을 평가하기 위한 방법의 하나로 각기 다른 경과년수를 갖는 비닐하우스로부터 채취한 서까래 파이프의 인장 시험을 실시하였다. 인장 시험에 사용된 서까래 파이프는 (구)시설원예시험장에 설치되어 있는 비닐하우스에서 경과년별로 채취하였으며, 지중매설부와 지상노출부로 구분하여 시편을 제작하였다. 인장 실험 결과 서까래 파이프의 경과년이 오래될수록 시편의 인장 강도는 작아지는 경향을 보이고 있으나, 파단연신율은 경과년과 연관성을 찾아보기 어려운 것으로 나타났다. 그리고 동일한 경과년을 갖는 서까래 파이프 시편에서 지중매설부의 인장 강도와 파단연신율이 지상노출부에 비해 대체로 작게 측정되었으며, 경과년이 증가할수록 인장 강도의 감소폭이 커지는 경향을 보이는 것으로 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.36-41
• /
• 1973

Chemical changes with time of frying-fats during the frying process (beef tallow with 0.01% BHA and 0.01% BHT, turnover rate 9%/hr and $140{\pm}10^{\circ}C$ temperature) of Ramyon on a commercial scale were studied. No significant changes of carbonyl value and peroxide value were noted up to 120 hrs. However, small increases in acid value, color and dimeric fatty acid were noted. Small decreases in iodine value and the content of unsaturated fatty acids were also observed. Under the experimental storage condition, when the stability of fats heated were compared to fresh fat, minor differences in carbonyl value and weight gain were noted. All of these demonstrated that frying-fats commercially used in Ramyon frying system were maintained in good quality during the frying process.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.90-98
• /
• 2017

This paper is concerned with air traffic controllers' fatigue and stress that they experience during their daily job particularly as being shift workers. Previous researches reveal that the controllers' fatigue and stress increase by several factors including time spent at work, traffic intensity, visibility, etc. The researches also indicate that air traffic controllers' fatigue and stress can be reasonably surrogated by their heart rate. We set three hypotheses relating the influencing factors and the fatigue and stress represented by the heart rates. Using wrist bands, air traffic controllers' heart rates at various situations are collected at Choongju airport. The hypothetical tests explicitly confirm that the heart rate is highly correlated with the traffic level and the time spent at work. In particular, it be shown that even when handling the same traffic level, air traffic controllers' stress level increases as the time they spent at work increases.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.60-66
• /
• 2018

For new use development of carbonized board, we investigated the effect of carbonization temperature on the surface temperature of carbonized board manufactured from a plywood, particle board, MDF, and wood of Fraxinus rhynchophylla at different carbonization temperature ($400^{\circ}C{\sim}1100^{\circ}C$). The surface temperature of carbonized board precipitously increased until 12 minutes elapsed, after smoothly increased and thereafter which were stable after 20 minutes. The higher carbonization temperature increased density of carbonized board and surface temperature of carbonized board so that density is considered to influence surface temperature change. Moreover, carbonized boards kept heat for a long time because the descent velocity of carbonized boards' surface temperature was slower than that of heater's.