• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.51-59
• /
• 1996

In this paper, we propose a new type of a planar waveguide lens, a meniscus lens instead of a plano-convex lens used widely for the optical integrated circuits such as optical numerical processors. A plano-convex lens has a spherical aberration caused by the linear boundary. In the proposed meniscus lens, this linear boundary is replaced by a circular-boundary, and the spherical aberration is removed. To test the performance of the proposed lens, a meniscus lens is designed using Fermat principle and fabricated on the Y-cut $LiNbO_3$ substrate. First a $Ti:LiNbO_3$ planar waveguide is fabricated on the $LiNbO_3$ substrate by Ti indiffusion. Then a meniscus lens is fabricated on the planar waveguide by TIPE(Ti indiffued proton-exchange) method. A plano-convex lens is also fabricated on the same substrate to compare the spot size at the focal point. The measured spot size of the meniscus lens is reduced to 59% that of the plano-convex lens. This result shows that the proposed meniscus lens is more effective for optical integrated circuits than the plano-convex lens.

• Composites Research
• /
• v.28 no.5
• /
• pp.260-264
• /
• 2015

In this paper, molecular dynamics (MD) simulation was carried to predict thermo-mechanical behaviors for carbon nanotube (CNT) reinforced epoxy composites and to analyze the trends. Total of six models having the volume fractions of CNT from 0 to 25% in epoxy were constructed. To predict thermal behaviors, temperature was increased constantly from 300 to 600 K, and the glass transition temperature ($T_g$) and coefficient of thermal expansion (CTE) analyzed using the relationship between temperature and specific volume. The elastic moduli that represented to the mechanical behaviors were also predicted by constant strain. Additionally, the effects of functionalization of CNT on mechanical behaviors of composite were analyzed. Models were constructed to represent CNTs functionalized by nitrogen doping and COOH groops, and interfacial behaviors and elastic moduli were analyzed. Results showed that the agglomerations of CNTs in epoxy cause by perturbations of thermo-mechanical behaviors, and the functionalization of CNTs improved the interfacial response as well as mechanical properties.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.846-851
• /
• 2010

A liquid-air interface sensing system using the flat end surfaces of a fused-silica fiber coupler has been demonstrated. The principle is based on the additional optical loss caused by changing the refractive index of the external material at the boundary of the end face made of a fiber. The immersion characteristics of this system with respect to the different splitting ratios of the couplers were investigated to determine the sensitivity when it responses to water and air. These experimental data are very useful for selecting the coupling ratio of a coupler in order to develop a multiple sensing probe system. In the proposed sensor structure, it can be emphasize that the sensing probe can be appropriately arrayed on the basis of splitting ratio of the coupler. As a result, it is expected that the proposed liquid-air interface sensors can also be applied to monitor flooding that occurs in multiple areas at the same time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.901-904
• /
• 2007

Nowadays, in many fields of medical treatment, we can make an observation and a diagnosis of inward disease without using a surgical operation. As one of them, ultra-sound diagnosis system can be available widely in its cost and size compared with other medical instruments. This system also make it possible for us to see the inner parts of the body in real time harmlessly for a long time. So it can be utilized to inspect the movement of heart or fetus and to diagnose an internal disease of the soft tissues. Ultra-sound images can be generated by the reflexive and scattered wave through the pulse generator and so in ultrasound images there exist inherently many affective noised signals. In this paper, we are to take an noise-restrained image and to extract a more affective regions of the images.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.62-62
• /
• 2011

한강하구지역의 강화해협은 한강, 임진강과 예성강의 강물이 흘러들어오는 하구형 수로로서 폭이 좁고, 유속이 매우 빠른 특성을 갖는다. 또한 조류(潮流)의 영향을 강하게 받아 상당량의 유량을 경기만으로 내보내고, 한강의 상류로부터 유입되는 상당량의 물질이 하구로 운반되어 침전하여 쌓이거나 하류의 외해로 배출하는 역할을 한다. 본 연구에서는 한강하류부에 위치한 강화해협의 유 무에 따른 한강과 임진강의 흐름특성 변화를 분석하였다. 수치모의를 위해 복잡한 하구지역의 물의 흐름해석이 가능한 일차원적인 모델링 도구인 MIKE 11 모형을 이용하여 정류 및 부정류 해석을 실시하였다. 상류경계조건은 홍수 시 방류량이 크게 증가하는 홍수기 유량과 조위의 영향을 많이 받는 평수기 시 유량으로 설정하였고, 하류경계조건은 평수기를 비롯하여 홍수기에도 임진강과 한강의 유량에 영향을 미치는 서해 조위로 설정하였다. 강화해협의 폐쇄에 따른 수위 변화의 영향은 홍수기 시 실제 강우 사상을 모의 하였을 때 최대 8.21% 수위가 상승하였으며, 200년 빈도 계획홍수량을 모의한 결과로는 정류 해석의 경우 최대 8.25%의 변화율을 보였고, 부정류 해석의 경우 최대 13.08%의 변화율을 보였다. 평수기는 창조기에 수위 변화가 적었던 반면 낙조기에는 창조기에 비해 수위 변동이 심하게 일어나는 것으로 나타났다. 추후 강화해협 뿐만 아니라 해양생태계의 중요한 가치를 지니고 있는 한강하구의 다른 수로에 의한 영향을 분석함으로써 수로의 중요성을 평가하고, 2차원 수치해석 등을 통한 다양한 분석을 실행하여, 홍수 및 해양환경 훼손으로부터 하구 환경을 보호하는 보다 정량적인 대응체계가 정립되어야할 것으로 사료된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.5
• /
• pp.410-418
• /
• 2009

Based on a linear potential theory, the boundary element method(BEM) is developed and applied to analyze the hydrodynamic forces and the motion responses of a floating body with a partially reflective sidewall. The hydrodynamic forces (added mass and damping coefficients) are dependent on not only the submergence of a floating body and the reflection of a sidewall, but also the gap between body and sidewall. In particular, the partial reflection of a sidewall plays an importance role in the motion responses of a floating body at resonant frequencies. It reduces the resonant peaks caused by resonance phenomenon due to the wave trapping in an enclosed fluid domain between body and sidewall. Developed predictive tools can be used to assess the motion performance of a floating body for various combinations of configuration of a floating body, wave heading, sidewall properties, and wave characteristics and applied to supply the basic informations for the harbour design considering the motion characteristics of a moored ship.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.177-182
• /
• 2007

The effects of three fuselage head shapes and nonplanar ground surface on the aerodynamic characteristics of FAST fuselages are investigated using a boundary element method. Wind tunnel test is also performed to validate the present method and to identify the wall effect on the frictional drag which cannot be analyzed using the present method. It is found that the channel has an effect of increasing the lift of those investigated fuselages. The optimal head shape depends on the design conditions of the FAST and its guideway channel. Comparing the calculated induced drag with the measured total drag, it can be concluded that the profile drag is independent of the ground height. Thus, the present numerical method can be applied to the conceptual design of the high-speed ground transporters if only the profile drag of the vehicle in free flight is assumed to be known.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.21-30
• /
• 2010

To understand the deformation behavior of nonwoven geotextiles(NWGT) reinforced soil wall, analyses of load-elongation properties, soil-reinforcement interface friction, laboratory model tests, and field cases throughout literature reviews are being studied in this paper. According to the analyses results, the stiffness and tensile strength of NWGT is increased in proportion to confinement pressures, and the interface shear strength at soil-NWGT appeared to be stronger than soil-geogrid interface. The deformation at the beginning of loading on NWGT reinforced soil wall is larger than geogrid reinforced soil wall, but the wall deformation with NWGT is smaller than the wall of geogrid after passing some loading point in laboratory model tests. Case analysis results have shown that the facing of NWGT reinforced soil wall should be rigid enough to be used as a permanent wall, and NWGT and in-situ poor soil can be used for reinforcement and backfill respectively if the wall is constructed as pre-reinforced soil body and with post-facing that has a full-height rigid concrete.

• Journal of the Korean Geographical Society
• /
• v.44 no.4
• /
• pp.510-531
• /
• 2009

This paper aims to explain the changes of social spatiality in rural areas as seen on a sloping scale in reference of population structure and utilization of territorial assets. Guessing from the population characteristics of rural communities and farming activities in Hwangsan village of Uichon-Myeon, Geochang-Gun and Hanam village of Chogye-Myeon, Hapchon-Gun, it will become a society characterized by super-aged intensification and large-scale crop cultivation. Deokgok-Myeon and Yulji village of Hapchon-Gun are required to intake outside residents. They have to understand the complementary cooperation and become conscious of the relationship between existing residents and relocated people in Yudong village of Yokji-Myeon, Tonyoung-Si. Due to a decreasing population and the phenomena of the 'super-aged', the efforts to revive the spatial function as a living and working space while utilizing territorial assets could be challenged in these case study regions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.71-78
• /
• 2018

This paper presents the assembling of multiple patches based on the single patch isogeometric formulation for the shear deformable shell element given in the previous study. The geometrically exact shell formulation has been accomplished with the shell theory based formulation and the generalized curvilinear coordinate system directly derived from the given NURBS geometry. For the knot elements matching across adjacent surfaces, the zero-th and first parametric continuity conditions are considered and the corresponding coupling constraints are implemented by a master-slave formulation between adjacent patches. The constraints are then enforced by a substitution method for condensation of the slave variables, thereby reducing the model size. Through numerical investigations, the important features of the first parametric continuity condition are confirmed. The performance of the multi-patch shell models is also examined comparing the rate of convergence of response coefficients for the zero and first order continuity conditions and continuity in coupling boundary between two patches is confirmed.