• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.15-21
• /
• 2002

Because of the environmental problem during the pile driving, the use of low noise-vibration auger-drilled pilling is increasing to solve noise and vibration problem in pilling. In Korea, SIP (Soil-Cement Injected Precast Pile) method is mainly used as auger-drilled pilling. But, a proper bearing capacity evaluation formula has not been suggested, yet. To improve and supplement this situation, direct shear tests between SIP pile skin interface and soil were executed under various conditions. Through the analysis of test results, skin resistance characteristics of SIP were investigated thoroughly. Also, the maximum unit skin resistance capacity evaluation formulae on SM, SC soil was suggested.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.507-514
• /
• 2012

This paper proposed the analysis method of the cavity resonance characteristics for a metallic enclosure with a PCB trace source. In order to calculation the electromagnetic fields inside the cavity, coupled integral equations for a current distribution on the PCB trace and an aperture electric field distribution on the boundary of the PCB dielectric are derived and solved by applying Galerkin's method of moments. The result show that the resonant characteristics of the metallic enclosure are fairly good agreement with the simulation(HFSS) and the measured results. The resonant frequencies of the metallic enclosure with the PCB trace are changed by the PCB trace location inside of the cavity. In order to check the validity of the theoretical analysis, the calculated return losses are compared with the measured results.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.67-73
• /
• 2005

The characteristics of the floating breakwater is briefly reviewed and their performance is numerically investigated. The numerical scheme is a boundary integral method for inviscid potential flows, and various two-dimensional floating breakwater modules are studied focusing on the transmission coefficient. The general characteristics of pontoons is studied as function of mooring line stiffness, mass moment inertia and draft. Trapezoidal-, hat- and table-shape cross-sections are also studied with varying shape-parameters. The efficiency varies with changes in each shape-parameter and for some cases satisfying tranquility can be expected with even longer waves.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.1
• /
• pp.14-18
• /
• 2002

The perceptron algorithm, which is one of a class of gradient descent techniques, has been widely used in pattern recognition to determine linear decision boundaries. However, it may not give desirable results when pattern sets are nonlinerly separable. A fuzzy version was developed to male up for the weaknesses in the crisp perceptron algorithm. This was achieved by assigning memberships to the pattern sets. However, still another drawback exists in that the pattern memberships do not consider class typicality of the patterns. Therefore, we propose a possibilistic approach to the crisp perceptron algorithm. This algorithm combines the linearly separable property of the crisp version and the convergence property of the fuzzy version. Several examples are given to show the validity of the method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.651-663
• /
• 2017

Experimental results of $30^{\circ}-15^{\circ}$ nozzles were compared with numerically calculated convective heat transfer coefficients using FLUENT, Boundary Layer Integration Method and Bartz predictions. Also, the convective heat transfer coefficients were calculated by using FLUENT and boundary layer integration method for NASA HIPPO nozzles according to the characteristics of combustion gas and the correlation between pressure and pressure was compared. Finally, thermal analysis of NASA HIPPO nozzle was performed to compare the ablation thickness and char depth according to the combustion gas characteristics.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.244-244
• /
• 2021

난류흐름 거동은 지형이나 수공구조물과 같은 고체 경계면의 변화에 민감하게 반응하며 특징 또한 다양하다. 보나 여수로 등과 같은 단차 구조물을 통과하는 흐름은 구조물의 모서리 같은 흐름 경계면이 급변하는 지점에서는 흐름분리(flow separation)가 발생하는 것이 특징이다. 이러한 흐름분리로 인해 전단층이 발생하며 흐름 재순환(recirculation)이 구조물 하류부에 형성된다. 이 연구에서는 낙차공 형식의 단차 구조물 하류부에서의 흐름 거동을 이해하기 위해 CFD모델링을 통하여 계산된 3차원 유동장을 분석한다. 난류 모의는 하이브리드 LES(large-eddy simulation)/RANS 계산 기법인 IDDES(improved delayed detached-eddy simulation)기법을 적용한다. IDDES의 기본 모형으로는 k-ω SST모형과 Spalart-Allmaras모형을 이용하여 두 모형의 성능을 평가한다. 자유수면의 변동은 VoF(volume of fluid)기법을 이용하여 계산하며, 각 지배방정식은 최소의 수치분산을 유지하면서 수치해의 안정성을 확보할 수 있는 2차 정확도의 유한체적법을 이용하여 이산화하였다. 수치해석 결과는 레이놀즈수 23,400과 후르드수 0.22의 조건에서 기존에 계측된 자료와 비교하여 수치모형의 정확도를 평가하고 하상 단차 하류부에서의 흐름 거동 특성을 분석한다. 계산 결과는 공학적으로 널리 사용되는 RANS 수치모의에서 볼 수 없는 전단층과 난류구조의 동적 거동 특성과 이에 따른 레이놀즈 응력분포의 특성을 설명해준다.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.31-38
• /
• 2009

The selection of the support system is an important design parameter in design and construction of the tunnel using the new Australian tunnel method. It is a common practice to select the support based on the rock mass grade, in which the rock mass is classified into five rock groups. The method is applicable if the characteristics of the rock mass are uniform in the direction of tunnel excavation. However, such case is seldom encountered in practice and not applicable when the properties vary along the longitudinal direction. This study performs comprehensive three dimensional finite difference analyses to investigate the ground deformation pattern for cases in which the rock mass properties change in the direction of the tunnel axis. The numerically calculated displacements at the tunnel crown show that the displacement is highly dependent on the stiffness contrast of the rock masses. The results strongly indicate the need to select the support type $0.5{\sim}1.0D$ before the rock mass boundary. The paper proposes a new guideline for selecting the support type based the results of the analyses.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.303-306
• /
• 2001

패턴 인식에서 선형 분류 가능한 경계면을 찾아 패턴을 분류하는 방법 중 가장 기본적인 방법은 퍼셉트론이라고 볼 수 있다. 하지만 선형 분류 불가능한 패턴에 대해서는 유용한 결과를 보여주지 못하였다. 먼저 제안된 퍼지 퍼셉트론은 베타영역 설정에 의해 수렴하지 못하는 특성을 보완하였다. 그러나 패턴의 순수한 전형성을 고려해 주지 못하는 단점이 있다. 이에 Crisp의 선형분류 특성과 퍼지의. 수렴특성을 합성하고자 Possibilistic 퍼셉트론을 제시한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.195-198
• /
• 2003

정밀 수치해석으로 구한 태핑음 데이터를 기준으로 하여 복합재료 구조물 내의 층간분리 손상의 존재 여부를 판단하는 비파괴 검사법을 제안하였다. 태핑음의 수치 모사를 위해 동적 접촉 알고리듬을 이용한 유한요소법과 경계요소법을 이용하였다. 태핑음 수치해석 과정에 대한 정식화를 수행하고 실제 구조물의 태핑음과 비교하여 수치해석 기법의 타당성을 밝혔다. 웨이브릿 페킷 변환에 근거한 특성 추출법을 이용하여 태핑음으로부터 손상 판단을 위한 특성을 추출하고 손상 판단의 지표가 되는 특성 지수를 정의하였다. 복합재료 구조물에 대한 층간분리 손상 검출과정을 시연함으로써 제시된 태핑음 검사법의 타당성을 밝혔다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.381.2-381
• /
• 2002

많은 동적해석 설계자들이 재료물성치의 불확실성, 연결강성 그리고 경계조건등의 해석상에서 나타날 수 있는 불확실성 때문에 모달 테스트에 많은 관심을 가지고 있었으며 또한 수행해 왔다. 그러나 대형구조물의 경우 저주파수 대역에서의 가진력 크기, 가진력 계측 문제등으로 동특성 실험을 위한 모달 테스트를 수행하기가 쉽지 않은 실정이다. (중략)