• Tunnel and Underground Space
• /
• v.9 no.1
• /
• pp.27-35
• /
• 1999

The characteristics of heat conduction for the heat source boundary like an arch shape cavern are different from those for the semi-infinite or circular boundary which can be driven theoretically. A new form of transient heat conduction equation in rock mass around the arch shape cavern is evaluated with analyzing the pattern of the rock temperature distribution measured at the cold storage pilot plant. The new equation, which is driven by adopting a shape function, $SF=\sqrt{logx_0/log(x_0+x)}$ to the solution for a semi-infinite boundary, has the semi-radial form of temperature variation with distance. And, thermal properties of rock mass are estimated by comparing the rock temperature distributions by this equation with those by measurement. Thermal conductivity and specific heat of rock mass are estimated as giving the difference of 20~25% compared to those of laboratory scale. This difference seems to be caused by discontinuity like joint and water content in rock mass.

• Composites Research
• /
• v.28 no.4
• /
• pp.176-181
• /
• 2015

In this study, the Z-shape fabric design is proposed as the way to enhance the ballistic performance of fabrics which are used as the intermediate layer of stuffed Whipple shield configurations. The Z-shape fabric employs a different boundary condition from those of conventional configurations of fabrics which include 4 edge fixed. Impact analysis on Z-shape aramid yarns and fabrics using LS-DYNA software was performed and the results were compared with 2 edge fixed and 4 edge fixed fabrics to identify the high velocity impact energy absorption characteristics of the Z-shape fabric. It was revealed that the Z-shape showed different impact behavior and higher energy absorption performance than 2 and 4 edge fixed fabrics.

• Journal of the Korean Magnetics Society
• /
• v.18 no.6
• /
• pp.221-224
• /
• 2008

This paper describes the equivalent dipole modeling method utilizing a singular value decomposition technique from analysis data by the FNREMUS Detailled Modeller software based on BEM which can predict the underwater electric field signal due to a galvanic corrosion phenomenon on a naval vessel. The proposed dipole modeling method was successfully verified in good agreement with predicted BEM data at 30 m depths through the comparison of average differences. The proposed dipole modelling method can be effectively used in the prediction and analysis of static electric field signature distributions generated from a naval vessel at any different depths.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.22-31
• /
• 2018

In this study, numerical simulations were performed to determine the dynamic characteristics of a pintle nozzle, with changes to the chamber boundary conditions. To apply movement, to the pintle, the nozzle and pintle were created separately by an auto-grid generation program using an overset grid method. The chamber boundary conditions were selected between a constant mass-flow rate condition and a propellant burn-back condition. The pressure and thrust characteristics of the constant mass-flow rate condition were determined by changing the ratio of the mass-flow rate in the inlet. The propellant burn-back condition was considered by formulation of the combustion rate. The burn-back conditions represented nonlinear phenomena, unlike the constant mass flow rate, and a small flow rate resulted in a large change in the chamber pressure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1125-1132
• /
• 2004

In this Paper, we Propose an effective boundary matching based error detection algorithm using causal neighbor blocks to improve video quality degraded from channel error in block-coded video. The proposed algorithm first calculates boundary mismatch powers between a current block and each of its causal neighbor blocks. It then decides that a current block should be normal if all the mismatch powers are less than an adaptive threshold, which is adaptively determined using the statistics of the two adjacent blocks. In some experiments under the environment of 16bi1s burst error at bit error rates (BERs) of 10$^{-3}$ -10$^{-4}$ , it is shown that the proposed algorithm yields the improvements of maximum 20% in error detection rate and of maximum 3.5㏈ in PSNR of concealed kames, compared with Zeng's error detection algorithm.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.33-38
• /
• 2015

Loads applied on the floor are transferred through beams to columns. The beams can be designed as both end fixed or simple beams. The load bearing capacity of a beam depends on each boundary condition. However, when the load bearing capacity of a beam is evaluated in fire tests, all kinds of beams are tested using simple beam conditions. In this study, an analytical method performed using heat transfer theory and heat stress analysis based on the mechanical and thermal properties of SS-400 steel at high temperature. This method was used to clarify the differences between the two types of boundary conditions at normal and high temperature. The results show that the load bearing capacity of a both-end fixed beam at high temperature is superior to that of a simple beam. Therefore, the application of simple beam conditions in fire tests for evaluation of load bearing capacity is conservatively safe compared to fixed boundary conditions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.39-47
• /
• 2004

In this paper, the defects of two-dimensional anisotropic elastic bodies are identified by using the boundary element method. The use of numerical models that contain only boundary integral terns reduces the dimensionality of the problem by one. This advantage is particularly important in problems such as crack mechanics. Avoiding domain meshing is also particularly advantageous in the solution of inverse problems since it overcomes mesh perturbations and simplifies the procedure. In this paper, nondestructive approaches for the existing isotropic materials are extended to analyze the elastic bodies made of anisotropic materials such as composites. After verifying that the proposing boundary element model is in good agreement with numerical results reported by other investigators, the effect of noise in the measurements on the identifiability is studied with respect to different design parameters of layered composites. Sample studies are carried out for various layup configurations and loading conditions. The effects of the layup sequences in detecting flaw of composites is explored in this paper.

• The KIPS Transactions:PartB
• /
• v.15B no.5
• /
• pp.383-390
• /
• 2008

Block based transform coding is most popular approach for image and video compression. However it suffers from severe quality degradation especially from blocking artifacts. The subjective quality degradation caused by such blocking artifacts in general does not agree well with an objecive quality measurement such as PSNR. Hence new quality evaluation technique is necessary. We propose a new image quality assessment method by measuring blocking artifacts for block based transform coded images. In order to characterize blocking artifacts, proposed method utilizes the facts that, blocking artifacts, when occur, have different pixel values along the block boundaries and such differences usually continuously span along the whole boundaries. This method does not require the original uncompressed image. It operates on single block boundary and quantifies the amount of blocking artifacts on it. Experiments on various compressed images various bitrates show that proposed quantitative measure of blocking artifacts matches well with the subjective quality of them judged by human visual system.

• Journal of KIISE:Software and Applications
• /
• v.27 no.3
• /
• pp.201-209
• /
• 2000

Recent works regarding video shot change detection algorithms show that abrupt shot changes are detected fairly well. However, gradual shot changes including wipes and dissolves are often missed or falsely detected. A robust shot change detection system, therefore, must include a shot verification step to further enhance the overall system performance. In this paper, we introduce the concept of the visual rhythm which is a single image, a subsampled version of a full video. On the visual rhythm, the different video edit effects such as cuts, wipes and dissolves manifest themselves as different patterns. Using this characteristic, it becomes possible, without sequentially playing the entire video, to find false positive shots as well as undetected shots. Thus, inclusion of the visual rhythm in the shot boundary verification process will aid the operator to exclude falsely detected shots as well as to find undetected shots fast and efficiently. For this purpose we have developed a new tool, a shot verifier incorporating the visual rhythm. The usefulness of the visual rhythm during the shot verification process will be presented.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.481-487
• /
• 2017

The interaction between a shock wave and a boundary layer causes boundary layer separation, shock train, and in some cases, strong unsteadiness in the flow field. Such a situation is also observed in a shock tube, where the reflected shock wave interacts with the unsteady boundary layer. However, only a few studies have been conducted to investigate the shock train phenomenon in a shock tube. In the present study, numerical studies were conducted using the two-dimensional axisymmetric domain of a shock tube, and compressible Navier-Stokes equations were solved to clarify the flow characteristics of shock train phenomenon inside a shock tube. A detailed wave diagram was developed based on the present computational results, which were validated with existing experimental data.