• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.568-585
• /
• 2022

In the present study, we proposed a numerical method for simulating thermally induced fracture slip using a grain-based distinct element model (GBDEM). As a part of DECOVALEX-2023, the thermo-mechanical loading test on a saw-cut rock fracture conducted at the Korea Institute of Civil Engineering and Building Technology was simulated. In the numerical model, the rock sample including a saw-cut fracture was represented as a group of random Voronoi polyhedra. Then, the coupled thermo-mechanical behavior of grains and their interfaces was calculated using 3DEC. The key concerns focused on the temperature evolution, thermally induced principal stress increment, and fracture normal and shear displacements under thermo-mechanical loading. The comparisons between laboratory experimental results and the numerical results revealed that the numerical model reasonably captured the heat transfer and heat loss characteristics of the rock specimen, the horizontal stress increment due to constrained displacement, and the progressive shear failure of the fracture. However, the onset of the fracture slip and the magnitudes of stress increment and fracture displacement showed discrepancies between the numerical and experimental results. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.2
• /
• pp.19-30
• /
• 2023

Underground structures, such as compacted sand piles applied as soft ground countermeasures, are analyzed for settlement and stability by the composite ground design method. The basic principle of the composite ground design method is the arching effect. The reinforcing effect of the pile is evaluated as the stress-distribution ratio. When applying grouting piles with elastic properties using the ground reinforcement method, the existing stress-distribution ratio was only considered when the pile was installed. This study shows that the method of applying the stress-distribution ratio applied in previous studies should be changed when the ground reinforcement pile is installed at an arbitrary location in the ground without raising it to the ground surface. When high strength jet routing is applied, the stress-distribution ratio (n) to the in-situ ground generally ranges from 30 to 50. However, if the pile is located far from the surface and the depth goes down to the boundary depth of the stress sphere, the stress-distribution effect rapidly decreases, and the stress-distribution ratio converges to 1.5.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.91-100
• /
• 2019

It is an undeniable that cultural landscape of Korea is centered in Seoul, where all the cultural powers are oriented. From this aspect, a municipal theatre of Daegu (Daegu Municipal Theatre), where is considered an area somewhat isolated from the perspective of culture, has managed to develop theoretical programs serving public purposes through efforts on the diversification of performance programs, development of creative plays, acceptance of open direction, classic, modern and experimental plays, foreign exchange, musicals and non-verbal, development of modern and post-modern history of the region, aggressive exploration of subjects, and characterization of the theater through citizen-participated programs and communication with citizens. With such efforts on diversification of public benefits and communality conforming to its purpose, it has been recognized for its contribution to the recovery of popularity of performance art and plays in Daegu. The Daegu Municipal Theatre, celebrating the 20th anniversary of establishment this year and having Choi Ju-Hwan as its fifth art director, has managed to conduct various experimental attempts to gain popularity and these include the exploration of the region and its historical figures, development and promotion of creative musicals, and promotion of communication between citizens and performance culture and of participation of audiences, in turn having a stabilized operation system. Such changes are seemed to be attributable to the maturity of performance production and roles of senior members. From this aspect, this study aims at investigating the changes in the Daegu Municipal Theatre and 'roles and popularity of national/public theatre companies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.282-282
• /
• 2020

본 연구는 여수시 농어촌지역에 대하여 지하수 함양특성, 개발가능량 산정 및 오염부하량 등의 조사를 통해서 체계적인 지하수자원의 보전관리(안)을 수립하기 위해 수행되었다. 연구지역은 여수시 화양면, 소라면 2개 면을 포함하는 농어촌 용수구역(여소지구)으로, 여소지구의 총면적은 130.68 ㎢이며, 이 중 임야면적은 81.57 ㎢, 경지면적은 32.98 ㎢ 이고, 경지면적은 논 15.37 ㎢, 밭 17.42 ㎢, 시설재배 0.19 ㎢로 구성되어 있다. 여소지구의 30년 강수평균은 1,454.08 mm/년이며, 지하수 함양량은 국가지하수관리 기본계획(국토교통부, 2019) 및 전라남도 지하수관리계획(전라남도, 2009) 보고서를 참고하여 평균값인 11.28%로 산정한 결과, 21,279 천㎥/년으로 분석되었다. 또한, 지하수연보(국토교통부, 2018)의 세부용도별 이용량을 활용하여 지하수 이용량을 산정한 결과, 2,638.35 천㎥/년이었으며, 강수량, 함양률 및 면적 값을 고려하여 지하수 개발가능량을 산정한 결과, 16,387.57 천㎥/년, 개발가능량 대비 이용량은 16.11%로 확인되었다. 여소지구의 질산성질소 항목은 총 181개소(경지면적 0.2 ㎢당 1점)에 대해 분석한 결과, 전체 평균값은 6.67 mg/L이었으며, 농업용수 수질기준(20 mg/L)을 초과한 관정은 8개소(6%)로 확인되었다. DRASTIC을 이용한 오염취약성 지수는 평균값이 119.57점으로 나타나 오염취약성이 낮은 것으로 분석되었다. 신고·허가된 축사 시설을 기준으로 점오염원 조사결과, 단위면적당 시설수(오염원밀도)는 3.12 개소/㎢로 조사되었으며, 인구, 가축 및 토지이용 등 인자별을 고려하여 오염부하량을 산출한 결과, 단위면적당 오염부하량은 75.30 kg/day/㎢로 확인되었다. 행정구역별로 7가지 지표를 반영하여 관심, 주의, 경계 및 심각 4단계로 기준을 설정하여 지하수관리 필요지역을 선정하였다. 수량 측면은 개발가능량 대비 이용량, 단위면적당 이용량 및 관정밀 3가지 지표를 적용하였고, 수질 측면은 질산성질소 평균, 오염취약성 지수, 오염원밀도 및 단위면적당 오염부하량 4가지 지표를 적용하여 선정하였다. 지하수관리 필요지역을 분석한 결과, 전체 18개 리 중에서 14개 리에서 수량관리 12개리에서 수질관리 필요지역이 나타났다. 수량관리 필요지역은 지하수 취수량 조정 및 관리 확충 등의 대책방안이 마련되어야 하며, 수질관리 필요지역은 주변 오염원관리 및 수질검사 강화 등의 대책방안이 필요할 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.491-497
• /
• 2009

This paper presents the results of accelerated pavement tests (APT) that simulate permanent deformation (rutting) of asphalt concrete pavements under different temperatures and loading courses. Also, finite element (FE) analysis has been conducted to predict the test results. Test section for APT is the same as one of test sections at Korea Expressway Corporation test road and is subjected to a constant moving dual tire wheel load of APT at three different temperatures: 30, 40, $50^{\circ}C$. The moving wheel is applied at different loading courses within a 75cm wide wheel path to account for traffic wandering. Also, the effect of wandering on permanent deformation development is investigated numerically with three wandering schemes. In this study, ABAQUS is adopted to model APT pavement section with plain stain elements and creep strain rate model is used to take into account viscoplastic stain of asphalt concrete mixtures, and elastic layer properties are back-calculated from FWD measurements. Plus, the effect of boundary condition and subgrade on FE permanent deformation predictions is investigated. A full FE model that accounted for subgrade provided more realistic rut depth predictions, indicating subgrade has contributed to surface rutting.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6C
• /
• pp.321-329
• /
• 2009

Laboratory compressive test was conducted on 6 different types of rock in order to investigate the characteristic of critical strain under uniaxial and triaxial stress condition. The results of uniaxial compressive test mostly ranged within 1~100MPa, the critical strain was also located between 0.1~1.0%. Therefore the results distributed within the upper and lower boundary proposed by Sakurai (1982). And the failure/critical strain ratio (${\varepsilon}_f/{\varepsilon}_0$) showed between 1.0~1.8 value depending on the uniaxial compressive strength. The results of critical strain by triaxial compressive test showed below 0.8% value for all test, the M value calculated from uniaxial and triaxial compressive test results ranged 1.0~8.0 for most of rock specimens. It is concluded that failure strain (${\varepsilon}_{f3}$) of rock mass, which is in triaxial stress condition is larger than the results of uniaxial stress condition (${\varepsilon}_{f1}$) by 1.0~8.0 times and value showed 1.0~1.8 larger value than critical strain (${\varepsilon}_{01}$). Therefore it is a conservative way for rock tunnel to use critical strain (${\varepsilon}_{01}$) calculated from a uniaxial compressive strength on tunnel displacement monitoring.