• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.50-56
• /
• 2012

Vent mixer can provide main flow directly into a recirculation region downstream of the mixer to enhance fuel-air mixing efficiency. Based on experimental results of three-dimensional velocity, vorticity and turbulent kinetic energy obtained by a stereoscopic PIV method, the performance of the vent mixer was compared with that of the step mixer which was used as a basic model. Thick shear layers of the vent mixer induced the increase of the penetration height. The turbulent kinetic energy mainly distributed along a boundary layer between the main flow and the jet plume. This turbulent field activates mass transfer in a mixing region, leading to the mixing enhancement.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.228-235
• /
• 2016

We investigated pre- and post- seismic total electron content (TEC) anomalies in ionosphere caused by recent large-scale earthquakes around the globe and additionally examined whether the similar phenomena are detected in connection with the earthquakes around the Korean Penisula. TEC anomalies associated with the large-scale earthquakes showed the similar results to previous studies. In addition, we newly found the similar TEC changes from the recent 2016 Ecuador earthquake (M7.8). However, the post-seismic TEC changes would be falsely interpreted as the pre-seismic TEC changes dependent on the post-processing of TEC observation. We also investigated the possibility of TEC responses from the recent domestic earthquakes including 2016 Gyeongju earthquake but could not find any anomalous TEC changes. This is probably because the domestic earthquakes release significantly smaller acoustic wave energy than that of large-scale earthquakes occurring in plate boundaries.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.19-30
• /
• 1990

This note describes an application of Hamiton's principle to nonlinear free-surface flow problems. Two functionals are constructed based on classical Hamilton's principle with a modification due to the presence of a free surface. As an effort towards the development of an efficient numerical scheme for our problem, we present the following three test results: i) The bounding principles of the eigenvalues for the linear dispersion relation. ii) By assuming steady solitary waves, an approximate relation between the amplitudes and the speeds of solitary waves are derived from the two functionals constructed. Their numerical results are compared with those of Longuet-Higgins & Fenton(1974). iii) The shapes and charicteristics of solitary waves are computed from two sets of functionals by varying the number of total finite elements in the fluid domain.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.23-31
• /
• 1994

The compartmentation model is represented by the characteristics and geometric information of the spaces defined by the structural members which are used for the boundary planes of the compartment. For the efficient compartment modeling a program performing the compartmentation design by the chopping and merging method was presented by authors. In this research, the development of an interactive ship compartmentation modeller is introduced. It is natural that the value of the program lessens if the input process is complicated and uneasy, even though the internal techniques for the compartmentation modeling are superior. In this paper, a method for the convenient input is proposed and implemented with the help of a graphical user interface technique. The modeling method introduced in this paper performs an efficient compartmentation modeling fast and conveniently by the solid modeling concept and the graphical user interface.

• Journal of Adhesion and Interface
• /
• v.4 no.4
• /
• pp.15-21
• /
• 2003

Polysulfone/organophilic layered silicate nanocomposites were prepared in the range of 0.25 to 9 wt% of organophilic-layered silicate by solution blend. Nano-hybridized films were cast from the blend solution. Exfoliation and intercalation of the polysulfone/organophiliclayered silicate nanocomposite films were confirmed by an X-ray diffractometer and a transmission electron microscope. Surface morphologies of polysulfone/organophilic layered silicate nanocomposite films were determined by a scanning electronic microscope and an atomic force microscope. When the organophilic layered silicate was added more than 1.5 wt%, the surface roughness (RMS) was rapidly increased because clusters of intercalated organophilic layered silicate particles existed on the polysulfone/organophilic-layered silicate film surface. Surface tension revealed an upward tendency over the contents of 1.5 wt% organophilic layered silicate in polysulfone/organophilic layered silicate nanocomposite. The change of surface morphology in polysulfone/organophilic layered silicate nanocomposite were affected by nano scale dispersed and intercalated organophilic layered silicate particles.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.195-205
• /
• 2003

This paper presents an analytic method and a design technique for golf shoes with air-cycled pump in the midsole. The golf shoes are modeled using the finite element method for better design by considering the configuration of the midsole and the outsole, which compose the golf shoes. Also the optimum size and shape of air-cycled pump in the midsole is examined. The values or standard human pressure for boundary conditions are adopted for the FEA(Finite Element Analysis). The unknown constants of the strain energy function of Ogden type are observed in accordance with the axial tension test. By the commercial FEM software for nonlinear analysis, MARC V7.3, the strains and the values of volume change for the midsole and the outsole are obtained, respectively. It can be concluded that results obtained by FEM in the midsole and the outsole are different depending on the characteristic of elastomer The results reported herein provide better understanding of analyzing the golf shoes. Moreover, it is believed that those properties of the results can be utilized in the shoes industry to develop the effective design method.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.206-212
• /
• 2003

This paper presents an analytic method and a design technique for golf shoes with coolant in the insole. The golf shoes are modeled using the finite element method for precision by considering the configuration by the insole, the midsole and the outsole, which compose the golf shoes. The values of standard human foot temperature for heat transfer boundary conditions are adopted for the FEA(Finite Element Analysis). By the commercial FEM software for heat transfer analysis, MARC V7.3, the temperature and the amounts of heat flux change for the insole are obtained, respectively. It can be concluded that results obtained by FEM in the insole are different depending on the characteristic of heat transfer. The results reported herein provide better understanding of analyzing the golf shoes. Moreover, it is believed that those properties of the results can be utilized in the shoes industry to develop the effective design method.

• Journal of the Korean Geophysical Society
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2002

Geophysical surveys(self-potential, electromagnetic, electrical resistivity, and seismic refraction methods) were performed to delineate the flow channel of leachate from a AMD (acid mine drainage) by correlating the anomalies to geochemical characteristics at an abandoned mine (Jangpoong mine). The geophysical responses attempted to be correlated with water sample analysis data(pH, EC, heavy metals, ${SO_4}^{-2}$). Electrical dipole-dipole resistivity sections represent the low-resistivity zone trending northwest, which indicates the leachate flow by AMD along the contact of the mine waste rock dump and the bedrock. From the overall points of geophysical and geochemical anomalies, it is summarized that the flow channel of leachate by AMD can be successfully imaged with composite interpretations on the geophysical and geochemical studies.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.637-648
• /
• 2021

This paper aims to propose new reentry guidance for Korean Space plane (KSP). Similar to the Space Shuttle guidance concept, a reference drag profile is first determined to satisfy several flight path constraints and boundary conditions, and the proposed guidance commands are realized in a way to track the predetermined reference drag profile. To this end, the drag dynamics is examined. The investigation uncovers that the dynamics characteristics of the drag and the flight path angle are considerably different. Based on this fact, the proposed guidance commands are determined using the time-scale separation technique and the feedback linearization methodology. The key feature of the proposed guidance lies in its simple structure and a clear working mechanism. Therefore, the proposed method is simple to implement compared to existing methods. Numerical simulations are performed to investigate the performance of the proposed method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.223-231
• /
• 2019

A continuum-based design sensitivity analysis(DSA) method is developed for electrostatic problems. To consider high order objective functions, we use 9-node finite element basis functions for analysis and DSA methods. As the design variables are parameterized with B-spline functions, smooth boundary variations are naturally obtained. To solve mesh entanglement problems during the optimization process, a mesh regularization scheme is employed. By minimizing the Dirichlet energy functional, mesh uniformity can be automatically achieved. In numerical examples for maximizing dielectrophoresis forces, the numerical results are compared with well-known electrode geometries and the obtained characteristics are discussed.