• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1351-1355
• /
• 2009

과거에 발생한 극한홍수기록을 역사기록에서 확인하고, 재해석하는 것은 근대적 관측기록에 100년 내외의 극한홍수 자료 기간을 획기적으로 확장할 수 있으며, 장기간의 정성적, 정량적 극한홍수기록으로부터 극한홍수의 발생 경향을 파악할 수 있고, 설계에도 반영하여 극한홍수에 안전한 기준을 작성할 수 있다. 본 연구에서는 극한홍수의 변화특성을 분석하기 위해 청계천 유역에 대한 극한홍수 사례분석을 수행하고자 하였다. 즉, 유역홍수유출모형 및 하천수리모형을 활용하여 청계천에서 발생한 과거 극한홍수를 평가하고 역사기록을 활용하여 공간적으로 해석하고자 하였다. 이를 위하여 과거 청계천 유역의 토지이용 현황을 역사문헌자료를 이용하여 구축하였다. 과거 청계천의 토지이용은 산림, 주거지역, 하천, 도로, 공원 및 녹지 등 총 5개로 분류하였다. 과거 청계천의 극한홍수량 산정은 HEC-HMS를 이용하였으며 사용된 강우자료는 과거 측우기 우량 중 최대강우량인 1885년 7월 16일의 392 mm와 200 mm를 넘는 최저강우량인 1828년 7월 4일의 202 mm를 이용하였다. 또한, HEC-RAS를 이용하여 최하류인 오간수문에서 최상류인 송기교까지의 본류구간에 대하여 과거 청계천 유역의 홍수량에 따른 홍수위를 계산하였다. 모형의 입력자료로는 하도구간 및 하천단면, 조도계수, 경사, 상 하류단 경계조건 등이 필요하다. 본 연구에서는 청계천 개수계획평면종단도(1936년, 경성부), 준천사실(1760년), 동국여지비고(1870년), 조선지형도집성(1921), 청계천 유물 발굴조사보고서(2006)의 상세 하도 구간 자료 및 종단도 자료를 이용하여 모의 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3119-3124
• /
• 2010

The purpose of this paper is to analyze dynamic behaviors of the oil film thickness and engine bearings in both aligned and misaligned operation conditions of a crankshaft using computer simulation techniques. A crankshaft as an elastic body is modeled for a misaligned crankshaft which is very important design parameter of the film thickness and engine bearings. In this analysis, a dynamic characteristic of a minimum oil film is analyzed based on the elastohydrodynamic lubrication theory. The boundary conditions for analyzing the film behaviors include non-linear constraint forces and bending moments in engine bearings. The more expedient model of an engine bearing is extended to consider the effect of crankshaft misalignment. The computed results indicate that the minimum oil film thickness that causes a major influence on the performance of engine bearings has showed a decrease of 16% to 24% for the misaligned crankshaft compared with an aligned crankshaft. The computed results show that the misalignment of a crankshaft inevitably brings the reduction of minimum oil film thickness and this may increase the failure of a bearing. These results as design parameters are very useful for a bearing designer as a firm reference data of an automotive engine.

• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.7-13
• /
• 2010

This experimental study presents tribological characteristics under boundary lubrication contacts associated with electrorheolocal (ER) fluid. ER fluid is prepared by using phosphorated starch particles and silicone oil. Experimental apparatus of tribological tester is designed and constructed to evaluate tribological characteristics of pin specimens. Wear tests under boundary lubrication of ER fluid are experimentally performed under consideration of several operational factors such as normal load, sliding distance, sliding speed and specimen materials: steel, copper and aluminum. After wear test, microscopic surface changes of the worn pin specimens are analyzed in order to investigate measured wear characteristics by using the scanning electron microscope (SEM) as well as surface profilometer. In addition, the chemical wear characteristics are investigated by using energy dispersive x-ray spectroscopy (EDS). Moreover, friction coefficient measurements under different materials of pin specimens are conducted for the tribological investigations. In order to verify the effect of starch phosphate particles in ER fluid, the wear test results with ER fluid are compared with test results with only silicone oil. The results clearly present that the phosphorated starch based ER fluid shows the stabilized wear as well as friction characteristics after run-in operations, but the wear rate under ER fluid is increased.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.225-234
• /
• 1997

This study was carried out to investigate the native distribution of wax myrtle (Myrica rubra) in Cheju Province and its propagation method. Wax myrtle is heavily distributed at 100 to 400m above sea level of Donhong-chun and Hyodon-chun which is bordered by Youngchon-dong of Seogwipo City and Haryeri of Namcheju county. BA, IBA, Kinetin, IAA, and GA3 were applied to promote rooting of cutting but were ineffective in promoting rooting. Treating cuttings with both AgNO,1 which removes rooting inhibitor, tannin and growth regulators such as BA, IBA and Kinetin were also ineffective in promoting rooting. Incubating seeds at 4$0^{\circ}C$ for 30 days resulted in 39％ germination. There was distinct difference in leaf shape between seedlings and mature trees.

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.1017-1028
• /
• 2016

Wind information is one of the major inputs for the prediction of urban air flow using computational fluid dynamic (CFD) models. Therefore, the numerical characteristics of the wind data formed at their mother domains should be clarified to predict the urban air flow more precisely. In this study, the formation characteristics of the wind data in the Seoul region were used as the inlet wind information for a CFD based simulation and were analyzed using numerical weather prediction models for weather research and forecasting (WRF). Because air flow over the central part of the Korean peninsula is often controlled not only by synoptic scale westerly winds but also by the westerly sea breeze induced from the Yellow Sea, the westerly wind often dominates the entire Seoul region. Although simulations of wind speed and air temperature gave results that were slightly high and low, respectively, their temporal variation patterns agreed well with the observations. In the analysis of the vertical cross section, the variation of wind speed along the western boundary of Seoul is simpler in a large domain with the highest horizontal resolution as compared to a small domain with the same resolution. A strong convergence of the sea breeze due to precise topography leads to the simplification of the wind pattern. The same tendency was shown in the average vertical profiles of the wind speed. The difference in the simulated wind pattern of two different domains is greater during the night than in the daytime because of atmospheric stability and topographically induced mesoscale forcing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1843-1850
• /
• 2004

If the location information of a great number of cars kept for business with telematics terminals is acquired and managed efficiently, this information forms the foundation for controlling cars and traffic flows. The studies on the pure spatial indices have focused on the efficient retrievals. However, the acquisition and management of the terminal location of moving objects are more important than the efficiency of the query processing in the moving object databases. Therefore, it will be need to adopt parallel processing system for the moving object databases which should maintain the object's current location as precise as possible. This paper proposes a location management system using CDMA communications of telematics terminals. More precisely, we propose a architecture of spatial indexing mobile objects using multiple processors, and also newly propose a method of splitting buckets using the properties of moving objects in order to minimize the number of database updates. We also propose a acquisition method for gathering the location information of moving objects and passing the information of the bucket extents in order to reduce the amount of passed messages between processors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3670-3676
• /
• 2011

A cell animation is represented by one background cell, and there is much difference of images when its shot is changed. Also, it does not have a lot of colors since people themselves draw it. In order to effectively detect shot transitions of cell animations while fully considering their intrinsic characteristics, in this paper, we propose a animation shot boundary detection algorithm that utilizes color and block-based histograms step by step. The suggested algorithm first converts RGB color space into HSI color one, and coarsely decides if adjacent frames contains a shot transition by performing color difference operation between two images. If they are considered to have a shot transition candidate, we calculate color histograms for 9 sub-regions of the adjacent images and apply weights to them. Finally, we determine whether there is a real shot transition by analyzing the weighted sum of histogram values. In experiments, we show that our method is superior to others.

• Journal of computational fluids engineering
• /
• v.3 no.1
• /
• pp.82-88
• /
• 1998

As a par of a project related to the development of the design algorithm of a compact heat exchanger for the application of the electronic home appliances, the effect of the discreteness of the airflow boundary generated on the cooling fin surface on the heat transfer and pressure drop characteristics of the heat exchanger was studied numerically. In general, there are two critical design parameters seriously considered in the design of the heat exchanger; heat transfer rate(Q) and pressure drop coefficient(C/sub p/). Even though the higher heat transfer rate with lower pressure drop characteristics is required in a design of the heat exchanger, it is not an easy job to satisfy both conditions at the same time because these two parameters are phenomenally inversely proportional. To control the boundary layer thickness and its length along the streamline, the surface of the flat fin was modified to accelerate the heat transfer rate on the fin surface. To understand the effect of the discreted fin size(S/sub w/) and its location(S/sub h/) on the performance of the heat exchanger in the airflow field, the flat fin was modified as shown in Fig. 1. From this study, it was found that the smaller and more number of slits on the fin surface showed the higher energy diffusion rate. It means that the discreteness of the boundary layer is quite important on the heat transfer rate of the heat exchanger. On the other hand, if the fin surface configuration is very complex than needed, higher static pressure drop occurs than required in a system and it may be a reason of the induced aerodynamic noise in the heat exchanger.

• Korean Institute of Interior Design Journal
• /
• v.26 no.4
• /
• pp.84-92
• /
• 2017

Just as the front gate is located at the meeting point between the house and the street, the Subject and the Other face each other the same way. This study examines the relationship between House(subject) and Stree (other) at the boundary of the Front Gate-Face. Pursuing the aspects of the changing Front Gate-Face accordingly to the attitude of the Subject facing the Other, this study tries to analyze the possibilities and significance of the hospitality Front Gate-Face with the ethical point of view of Levinas. As architectural instance, results of examining the Front Gate-Face of traditional houses in Korea, China and Japan are as follows. Front Gate-Face of China is characterized by self-centered introversion to interact with the external world (the other). Front Gate-Face of Japan is characterized by a humble submission to the group. Front Gate-Face of Korea shows however more flexible relationship orientations in terms of hospitality, compared to Japan or China. When looking through hospitality factors, accordingly to the above mentioned Korean hospitality characteristics, the possibilities seem not be exclusively bordered inside the conceptual category perimeter suggested by Levinas' concept of hospitality. It is almost impossible for the nowadays ever-strong privacy culture to not allow room for the architectural structure of an absolute hospitality toward others. However, this impossibility not being absolute, still yields a space for a significant possibility to explore.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.110.2-110.2
• /
• 2011

일본 Sanyo 사에 의해서 획기적으로 HIT 태양전지가 개발된 바 있다. 이러한 HIT 태양전지는 기존의 확산-접합 Si 태양전지에 비해서 저비용 고효율의 장점을 갖는다: 22% 이상의 변환효율, $200^{\circ}C$ 이하의 공정온도, 낮은 태양전지 온도 의존도, 높은 개방전압. 한편 Sanyo사의 HIT 태양전지는 n-형 Si 웨이퍼를 이용한 반면에, 최근 미국 National Renewable Energy Laboratory는 p-형 Si 웨이퍼를 이용해서 변환효율 19% 대의 HIT 태양전지를 개발한 바 있다. 그 동안 지속적으로 p-형 Si HIT 태양전지를 고효율화하기(< 22%) 위해서 많은 노력이 진행되어 왔지만 이와 같은 노력에도 불구하고 아직 p-형 HIT는 n-형 HIT 태양전지에 비해서 다소 성능면에서 떨어져 있다. 본 연구는 n- 및 p-형 실리콘 웨이퍼로 구성된 HIT 태양전지의 물리적인 차이점에 초점을 맞추고, 결정 및 비정질 실리콘 층의 역할에 대해서 연구하였다. 특히 태양전지 효율을 향상시키는 요소들로서 결정 실리콘의 불순물 준위(n- 및 p-형) 또는 비저항, 비정질 실리콘으로 구성된 emitter 층, intrinsic 층, 경계면이 고려되었다. 그리고 이러한 요소들이 HIT 태양전지에 미치는 영향을 조사하기 위해서 AMPS-1D 컴퓨터 프로그램을 사용하였고, 이를 통해서 HIT 태양전지의 결정 및 비정질 실리콘 층의 역할을 물리적 정량적으로 분석하였다. 본 연구에 적용되는 HIT는 ITO/a-Si:H(p+)/a-Si:H(i)/c-Si(n)/a-Si:H(i)/a-Si:H(n+) 및 ITO/a-Si:H(n+)/a-Si:H(i)/c-Si(p)/a-Si:H(i)/a-Si:H(p+)의 구조로서 다음과 같은 태양전지 특성을 갖는다: n-형 HIT의 경우, fill factor ~ 0.78, 단락전류밀도 ~ 38.1 $mA/cm^2$, 개방전압 0.74 V, 변환효율 22.3 % (그리고 p-형 HIT의 경우, fill factor ~ 0.76, 단락전류밀도 ~ 36.5 $mA/cm^2$, 개방전압 0.69 V, 변환효율 19.4 %).