• Journal of the Korean Data and Information Science Society
• /
• v.26 no.2
• /
• pp.367-376
• /
• 2015

Today, big data has become a hot keyword in that big data may be defined as collection of data sets so huge and complex that it becomes difficult to process by traditional methods. Clustering method is to identify the information in a big database by assigning a set of objects into the clusters so that the objects in the same cluster are more similar to each other clusters. The similarity measures being used in the cluster analysis may be classified into various types depending on the nature of the data. In this paper, we computed upper and lower limits for probability interestingness measure based similarity measures without marginal probability such as Yule I and II, Michael, Digby, Baulieu, and Dispersion measure. And we compared these measures by real data and simulated experiment. By Warrens (2008), Coefficients with the same quantities in the numerator and denominator, that are bounded, and are close to each other in the ordering, are likely to be more similar. Thus, results on bounds provide means of classifying various measures. Also, knowing which coefficients are similar provides insight into the stability of a given algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.730-739
• /
• 2015

In this paper, a wideband circular polarizer operating in the frequency range of 6~18 GHz is designed and fabricated using a multilayer structure with meanderlines. A T matrix expression for the unit structure, which consists of meanderline, dielectric substrate and spacer, was derived using the boundary value solution. A proposed meanderline structure was modeled as an array of unit meanderline cell in order to apply the waveguide model with PEC and PMC boundary conditions. The calculation procedures to obtain an equivalent susceptance of the unit meanderline cell using HFSS was also suggested. Using a hybrid method, which combines the T matrix with the HFSS results, and cut-and-try method, a wideband circular polarizer with low insertion loss and good AR performance was designed. The fabricated polarizer has the return loss less than -10 dB within 92 % bandwidth, the average insertion loss less than -0.24 dB, and the average AR below 2.6 dB for full 3:1 bandwidth.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.37-46
• /
• 2013

Recent years have witnessed the use of micro shock tube in various engineering applications like micro combustion, micro propulsion, particle delivery systems etc. The flow characteristics occurring in the micro shock tube shows a considerable deviation from that of well established conventional macro shock tube due to very low Reynolds number and high Knudsen number effects. Also the diaphragm rupture process, which is considered to be instantaneous process in many of the conventional shock tubes, will be crucial for micro shock tubes in determining the near diaphragm flow field and shock formation. In the present study, an axi-symmetric CFD method has been applied to simulate the micro shock tube, with Maxwell's slip velocity and temperature jump boundary conditions. The effects of finite diaphragm rupture process on the flow field and the shock formation was investigated, in detail. The results show that the shock strength attenuates rapidly as it propagates through micro shock tubes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.1
• /
• pp.15-24
• /
• 2012

This study aims to investigate characteristics of water quality factors by using survey results of national marine environmental monitoring system from 2004 to 2010 at coastal area of the East Sea of Korea. In this study, we chose statistical methods to analyze the correlation among water quality parameters and principal component analysis for characteristics of each water environment. In addition to this, we evaluated each water's pollution level based on eutrophication standard of OECD, Eutrophication Index(EI), and Organic Pollution Index(OPI). Major factors were chlorophyll a and salt according to the analysis at coastal area of the East Sea. The sea was divided into the south and the central part by Jukbyeon. Also, Jukbyeon in the central part of the East Sea and Gampo in the southern sea coastal waters have been classified separately. The nutritional status of coastal area of East Sea presented Mesotrophic to Oligotrophic level and EI showed less than 1. OPI in all of the coastal area at the East Sea represented that the water quality condition was favorable.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.38-47
• /
• 1992

The motion response of a ship moored in a rectangular harbor excited by long waves has been studied theoretically and experimentally. Within the framework of potential theory, matched asymptotic expansion techniques are exployed to analyze the problem. The fluid domain is divided into the ocean and the harbor regions for the analysis of wave response in a harbor without ship. The wave responses in both the ocean and the harbor sides are solved first independently in terms of Green's functions, which are the solutions of the Helmholtz equation satisfying appropriate boundary conditions. Slender body approximations are used to obtain the velocity jumps across the ship, which are associated with the symmetric motion modes of the ship. Unknowns contained in each solution are finally determined by matching at an intermediate zone between two neighboring regions. Theoretical results predict the ship motion qualitatively well. The main source of quantitative discrepancies is presumably due to real fluid effects such as separation at the harbor entrance and friction on harbor boundaries.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.732-737
• /
• 2009

Wind tunnel testing on the real-scale pantograph for high-speed train has been conducted to investigate the aerodynamic characteristic of the pantograph at high-speed. The mid-scale subsonic wind tunnel of Korea Airforce Acamedy with 3.5m width, 2.45m height, and 8.8m length test section has been employed. The test model has been supported above 50cm height from the bottom of test section using vertical strut to eliminate the boundary layer generated from the bottom of the test section. The height of the pantograph has been varied in three cases, in both of the normal running and reverse running modes. The resultant lift forces of the pantograph to catenary system in all the cases have been measured and the relation between the test conditions and the lift forces have been extensively analyzed.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 1994.07a
• /
• pp.7-8
• /
• 1994

한국산 표고버섯 균사체를 액체배양하여 천연항암물질로 알려진 단백다당체를 추출한 후 그 물질의 특성에 대하여 검토하였다. 균사체의 최적 재양조건을 TGY배지로 조사한 바 온도 $25^{\circ}C$, 배양초기 pH4.0, 교반속도 300rpm, 균사배지 접종량을 10.0%로 하고 산소 통기량을 1.0volume of ait/volume of medium/mimute으로 하였을때 가장 양호한 조건이였으며, 대량생산 하기 위한 SCM배지에서 최적의 C/N비는 13.1오써 7일간 배양하였을때 18.8g/L의 균사령을 얻었으며, 이때 생산수율은 0.46으로 나타났다. 발효가 끝난 배양액에서 균사, 여액 그리고 배양액의 전체에서 단백다당체를 분리한 결과 각 분획에서 단백다당체가 각각 0.55%, 0.12%, 0.69%가 회수되어 배양액 전체에서 단백다당체를 추출하는 것이 바람직하며, 추출방법으로 열수추출, glass bead추출 및 cellulasa처리를 하여 단백다당체의 수율을 비교한 결과 0.25-0.5mm glass nead로 30분간 균사체를 분쇄한 다음 열수추출을 1시간을 하였을때 990mg/100ml의 단백다당체를 얻을 수 있었다. 고단백다당체를 1차 단백질 가수분해 효소로 분해하고, EDAE cellulose 및 Sepadex G-100 column chromatography로 정제한 후, TLC/FLD, ultracentrifugation한 결과 순수한 물질임을 알 수 있었다. 단백다당체의 항암효과 조사중 in vitro배양에서 $P_{388}$과 $L_{1210}$에 대한 단백다당체의 활성단위 1 unit는 1mg정도였으며, 인체의 장암세포인 HCT-48, HRT-18, HT-29 밀 간암세포인 Hep G2 대한 생육저해 단위는 각각 4.4, 3.6, 6.6, 2.6mg이었다. HCT-48과 Hep G2 세포의 크기 분포도는 대조군에 비하여 시간이 경과함에 따라, 그리고 단백다당체의 농도가 증가함에 따라 peak가 작은 size 쪽으로 이동하였다. 또, 단백다당체를 첨가 배양한 HCT-48과 Hep G2세포의 현미경 관찰에서 본래의 암세포 형태가 변형되고 크기가 감소하며 세포사이의 경계막이 흐트러지면서 세포수가 감소하고 사멸하였다. In vivo실험에서는 대조군보다 단백다당체를 첨가한 군에서 항체 형성능력이 대조군에 비하여 형질세포가 2배로 증가하였다. 단백다당체의 화학적 성분 분석에서 다당함량은 46.1%이면 구성다당류는 glucose, galactose, mannose, xylose로 구성되었고 단백질의 함량은 7.28%이며, 구성아미노산은 15종의 아미노산으로 되었다. 또 무기물은 Na, K, Zn, Ca등의 순으로 이루어 짐을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.45-52
• /
• 1995

In influence of the vapor phase turbulent stress (i.e., the too-phase Reynolds stress) to the characteristics of two-phase system in a horizontal pipe has been theoretically investigated. The average two-fluid model has been constituted with closure relations for stratified flow in a horizontal pipe. A vapor phase turbulent stress model for the regular interface geometry has been included. It is found that the second order waves propagate in opposite direction with almost the same speed in the moving frame of reference of the liquid phase velocity. Using the well-posedness limit of the two-phase system, the dispersed-stratified How regime boundary has been modeled. Two-phase Froude number has been found to be a convenient parameter in quantifying the onset of slugging as a function of the global void fraction. The influence of the taper phase turbulent stress was found to stabilize the flow stratification.

• Solar Energy
• /
• v.12 no.3
• /
• pp.60-69
• /
• 1992

Heat transfer characteristics and heat storage rate for vertical cylinder packed with paraffin as a latent heat storage material were theoretically studied. Conduction and convection mechanism were applied to the solid and liquid phase, respectively, and the results were compared with that of pure conduction model. The effects of heating temperature, initial solid temperature and aspect ratio on rate of storage were also studied. In the initial stage of melting, the natural convection is nearly restricted by the friction at the wall and the phase boundary. But it is generated when about 40% of solid melts and again it shrinks by the hot liquid situated on the upper part of the cylinder. So overall melting rate is higher then that for pure conduction model. The increase in heating temperature and aspect ratio activates the natural convection, so melting rate becomes higher. And the larger the aspect ratio, the greater the difference between upper and lower size of the solid. In the initial stage of melting, the initial temperature of solid paraffin has great effect on the melting rate, but as melting proceeds its effect lessens gradually.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.21-30
• /
• 2015

Image coding based on mixed raster content model generates don't care regions (DCR) in foreground and background layers, and its overall coding performance is greatly affected by region filling methods for DCRs. Most conventional methods for DCR filling fail in utilizing the local signal properties in hole regions and thus the high frequency components in non-DCR regions are reflected into DCR after signal filling. In addition, further high frequency components are induced to the filled signal because of signal discontinuities in the boundary of DCR. To solve this problem, a new DCR filling algorithm using the priority-based adaptive region growing is proposed in this paper. The proposed method uses the watershed algorithm and the flooding priority of each pixel for region filling is determined from the degree of smoothness in the neighborhood area. By growing the filled region into DCR based on the computed priority, the expansion of high-textured area can be minimized which can improve the overall coding performance. Experimental results show that the proposed method outperforms conventional algorithms.