• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.289-299
• /
• 2009

This study summarizes basic results on the characteristics of mean wind pressure distribution on rectangular low-rise buildings with various breadths and depths through simultaneous multi-point wind pressure test. 5 types of rectangular wind pressure test models with various breadths and depths have been made for this study. Wind pressure tests are conducted on the Boundary Layer Wind Tunnel at Kumoh National Institute of Technology. The characteristics of mean wind pressure distribution with respect to various breadths and depths of low-rise buildings are analyzed into windward face, leeward face and side faces of building. From the results, new wind pressure coefficients and simplified wind load estimating formula for the resonable design of the structural frames of low-rise building were proposed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.583-590
• /
• 2012

This study proposes fusion image matching method according to land cover property to generate a detailed DEM using the high resolution IKONOS-2 stereo pair. A classified image, consists of building, crop-land, forest, road and shadow-water, is produced by color image with four bands. Edges and points are also extracted from panchromatic image. Matching is performed by the cross-correlation computing after five classes are automatically selected in a reference image. In each of building class, crop-land class, forest class and road class, matching was performed by the grid and edge, only grid, only grid, grid and point, respectively. Shadow-water class was excepted in the matching because this area causes excessive error of the DEM. As the results, edge line, building and residential area could be expressed more dense than DEM by the conventional method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.479-479
• /
• 2012

유기발광소자는 낮은 구동전압, 저전력, 높은 명암비, 빠른 응답속도, 넓은 시야각 및 높은 박막의 특성을 가지고 있어서 차세대 평판 패널디스플레이 기술로 각광받고 있다. 하지만 청색 유기발광소자는 적색과 녹색 유기발광소자에 비해 낮은 신뢰성, 발광효율 및 색 순도의 문제점을 가지고 있어, 이를 개선하기 위한 연구가 다양하게 연구되고 있다. 청색 유기발광소자의 경우 발광층 내부로 주입되는 정공과 전자의 균형을 조절하기 위해 p-i-n 구조를 사용하거나 이리듐-유기물 합성물과 같은 인광물질의 적용하여 발광효율을 높이는 청색 유기발광소자에 대한 연구가 진행되고 있다. 하지만 정공 보조층과 청색 형광층의 도핑구조의 청색 유기발광소자에 대한 발광효율 증가 메커니즘에 관한 연구는 비교적 많이 이루어지지 않았다. 본 연구에서는 열 증착 방법을 이용하여 정공 보조층과 청색 형광층으로 구성된 이중 발광층을 사용한 청색유기발광소자의 발광효율 증가 메커니즘에 대해 연구하였다. 10%의 2,9-dimethyl-4,7-diphenyl-1,10-phenanthorlene (BCP)로 도핑된 2-methyl-9,10-bis(naphthalene-2-yl)anthracene (MADN)층을 발광층으로 사용한 유기발광소자, 5% MADN으로 도핑된 1, 3-bis(carbazol-9-yl)benzene (mCP) 층을 발광층으로 사용한 소자 및 10% BCP로 도핑 된 MADN 층과 5% MADN로 도핑 된 mCP층을 혼합하여 발광층으로 사용한 소자의 전류밀도-전압-발광 특성을 비교하여 청색 유기발광소자의 발광효율 증가 메커니즘을 분석하였다. 이중 발광층을 가지는 소자는 두 단일 발광층 중심부의 경계면에서 축적된 정공에 의해 발생한 쿨롱 인력으로 더 많은 전자들을 끌어들이게 되어 엑시톤 형성 및 빛 방출이 증가하였다. 이 실험의 결과는 MADN 형광물질을 가진 청색 유기발광소자의 발광효율 증가 메커니즘에 대한 이해를 높이는데 도움을 줄 수 있다.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.865-871
• /
• 1999

Effect of sintering condition in mechanical properties of ZrSiO\ulcorner shell molds was investigated. Number of microcrack in primary layer of the mold was maximized after preheating at $1000^{\circ}C$ for 1.5 hours. Yield strength and specific surface area of the mold were inversely proportion to sintering temperature and time. After hot deformation test at $1500^{\circ}C$ for 4 hours, molds were deformed opposite to the loading direction and backup layers were cracked along the interface between stucco and zircon slurry. Reverse deformation of the molds during hot deformation test was considered to be resulted from the difference of thermal expansion coefficient between alumina stucco and zircon slurry in primary coat, and size difference between zircon stucco and zircon slurry in backup coat.

• Archives of design research
• /
• v.16 no.1
• /
• pp.45-52
• /
• 2003

Modem church architecture in korea have many problems in the shape and composition of space and design method. Many church were built without consideration of the identity of the christian religion. The characters of Ando Tadao's church architecture are using the transition space, light and the symbol. The transition space similar to the approach process using in asian temple. It make a meditative space for the church during approach to the chapel. Ando Tadao make meditative space by using self-support wall. In here, Self-supporting wall devide space as the holly space and the common space. Light is very important element in church architecture. He introduce light and shadow in the chapel more significant element. Light and shadow make the space with very dignity. Also, Ando Tadao use symbol as important element. It make the identity of christian religion. He make that as a part of structure. The well-controled symbols change the simple space to more religious place.

• The Journal of Engineering Geology
• /
• v.8 no.1
• /
• pp.25-34
• /
• 1998

It is not easy to understand exact soil properties, because soil is nonhomogeneous and anisotropic. There are raany inefficient cases in aspect of time and economy in site survey. So this study tried to analyze the correlation of cone resistance and seismic velocity in order to present an efficient method in ground investigation. A cone penetrometer is frequently used to investigate soil properties, which are especially fit to investigate coastal soft ground. A portable cone penetrometer was used in this research. A portable cone penetrometer has an advantage in investigating the state of soil swiftly and is convenient to manipulate. Also, seismic prospecting is one of the most PoPular methods among geophysical prospecting methods in the estimation of ground properties and its usage is continuously increasing in the survey of soft ground Cone resistance makes a regular group according to stratum in each depth. The results of seismic prospecting show a tendency to have a certain coherence according to the boundary of straturft Therefore, cone resistance and seisrnic prospecting have considerable relations that rnay irnprnve the efficiency of ground investigation.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.532-535
• /
• 2009

본 논문은 초고압 전력케이블의 접속재 개발을 위한 연구결과로써, 접속시스템의 핵심기술인 고절연 고무슬리브 및 현장에서 접속 작업의 용이성을 위한 Carrier Pipe의 구조해석과 전기적 절연설계에 의한 주요부의 전기적 특성과 전계의 집중을 완화하기 위해 Simulation Tool을 이용한 수치해석 등을 실시하여 최적화된 제품을 제작하였다. 절연설계 및 전계완화 해석에서는 고절연 고무슬리브 구조에서 전계가 집중될 수 있는 중요 포인트를 벡터로 선정하였고 이를 기초로 전계해석을 진행하여 선정된 포인트들에서 전계가 집중됨을 검증하였다. 접속재의 수축거동 해석에 의하면, Carrier Pipe의 구조적 안전성을 확보하기 위하여 고절연 고무슬리브로부터의 압력을 구하여 계산한 결과 최소한 9mm이상의 Carrier Pipe 두께가 필요한 것으로 파악 되었다. 이것은 충분한 강도뿐만 아니라 Carrier Pipe의 변형발생으로 인한 현장에서의 설치문제까지 고려하게 된 값이다. 고절연 고무슬리브 제품설계 에서는 고절연 고무슬리브의 특성조건을 설정하였고 고절연 고무슬리브 제품 및 Carrier Pipe의 Interface 설계 기준을 파악하기 위하여 기존의 고절연 고무슬리브를 활용하여 Carrier Pipe와의 장착 Test를 진행하였다. 그 결과, 확장비율 110%로 적용하였을 경우는 30시간 후에는 완전 붕괴가 되었고, 붕괴가 시작되는 지점이 고절연 고무슬리브의 중앙매립전극 경계면으로써, Simulation Tool을 활용한 접속재 수축 거동 해석 결과와도 일치함을 검증 할 수 있었다.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.15-21
• /
• 2018

This study examined the growth characteristics and carbonization pattern when a fire occurs due to a flammable liquid sprinkled on a vinyl floor. When acetone was sprinkled on a floor, the flame reached its peak in approximately 0.2 s after it was ignited. The lower part of the flame showed a laminar pattern while the upper part showed a turbulent pattern. The pattern showed a turbulent pattern and generated white smoke. The combustion completed floor surface showed carbonization of a dim pore pattern. In the case of benzene, an intense flame was formed in approximately 0.6 s after ignition. The flame length was measured to be approximately 50 mm. When the flame became weak, a significant amount of black smoke was generated due to incomplete combustion. The combustion completed floor surface showed carbonization of a pour pattern and splash pattern. In the case of alcohol, an intense flame was formed in approximately 1.1 s after ignition. In addition, the depth of carbonization was significant where the flammable liquid was collected and a trace of carbonization was observed at the boundary of the flow path of the flammable liquid.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2009

A new system of modified freeze-thaw testing apparatus is introduced. This system is developed to evaluate the geotechnical parameters and their dependence upon freezing-thawing history of frost-susceptibility soil. A necessary condition for stationary frost heaving is clarified in this paper. The method changes the thermal boundary condition up to the net heat flow at the freezing frost becomes zero. The effectiveness of this method is verified by freeze-thaw tests. Frost heaving observed after the application of the method is found to be due to another frost heaving action called long-term frost heaving. This frost heaving has already been studied and is considered ignorable as engineering factor because of its small heaving amount.

• Journal of the Korean Geographical Society
• /
• v.44 no.5
• /
• pp.605-623
• /
• 2009

This study is aimed to classify rainfall regions in Pakistan. Classification of rainfall regions is essential to understand rainfall patterns in Pakistan. Rainfall patterns have been investigated using a factor and cluster analysis technique by 10-days rainfall parameter. The data used here have been obtained from 32 specific weather stations of PMD (Pakistan Meteorological Department) for the period of January 1980 to December 2006. The results obtained from factor analysis provide three factors and these three factors accounts for 94.60% of the total variance. For a better understanding of rainfall regions, cluster analysis method has been applied. The clustering procedure is based on the Wards method algorithm. Overall, these rainfall regions have been divided into six groups. The boundary of the region is determined by the topology such as Baluchistan plateau, Indus plain, Hindu Kush and Himalaya ranges.