• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2006

A steam generator of nuclear power plant has thousands of thin tubes. These tubes play an important role in maintaining the pressure boundary between the primary and secondary side of nuclear power plant. The steam generator tube is easy to be damaged because of the severe operating conditions such as the high temperature and pressure. Therefore, tremendous efforts are made to assess the structural integrity of the steam generator tubes. The eddy current test is the most popular non-destructive test to assess the integrity of the tubes. However, the eddy current test has the limitation to size the flaw accurately because the eddy current signal behavior depends on the total volume of flaw. This paper shows the possibility that the ultrasonic test method can be applied to detect the flaws in the steam generator tubes and to measure them quantitatively. From the test results, it is expected that if the ultrasonic test is put to practical use in the steam generator tube inspection, the inspection results will be improved.

• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.81-88
• /
• 1996

To study the Cd adsorption in the presence of competing ions in soil-solution interphase, three soil samples from the Bt horizon were taken and analyzed for their physical and chemical properties. Adsorption of ethylene glycol monoethyl ether(EGME) and N, were determined to establish the specific surface area of the soils. We attempted to establish a qeneralizing competitive sorption isotherms for soils of entirely different composition of the solid phase, resulting in the routine use as a guidelines for the fate of reactive solute in soil profiles. Many physicochemical factors including competitive adsorption bettween solutes will affect the general adsorption phenomena as shown in a single not only on the soil:solution ratio used, but also on the surface areas of its respective soil samples. This phenomenon was attributed to competition Cd for sorption sites with Mg by different soil constituents. These adsorption isotherms are able to use as examples to demonstrate that this phenomenon can complicate the development of a standardized batch adsorption procedure as well as interpreting fate and adsorption of toxic inorganic compounds.

• Phonetics and Speech Sciences
• /
• v.11 no.4
• /
• pp.109-116
• /
• 2019

This study was conducted to identify the characteristics of pauses and breath groups made by normal adults and patients with voice disorders while reading a paragraph. Forty normal female adults and forty female patients with a functional voice disorder (18-45 yrs.) read the "Gaeul" paragraph with the "Running Speech" protocol of the Phonatory Aerodynamic System (PAS), by which the pauses with or without inspiration and between or within syntactic words and breath groups were analyzed. The number of pauses with inspiration was found to be higher in the patient group, but the number of pauses without inspiration was higher in the normal group. The rate of syntactic word boundaries with pauses with inspiration was higher in the patient group, while the number of syllables per breath group was higher in the normal group. As these results can be explained by patients' poor breath support due to glottal insufficiency, the question of whether voice disorder patients use their pauses and breath groups properly should be considered carefully in evaluation and intervention.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.273-286
• /
• 2008

Underwater acoustic sensor array can detect acoustic signal in underwater and the sensor array can be mounted in each left, right or front side of the UUV(Unmanned Underwater Vehicle). The sensor array could be conformal array and effected turbulent boundary layer flow noise. Therefore, in this paper numerical simulations were performed to know the how the outer flow noise affect the hydrophone which embedded in the elastomer. Corcos wall pressure model was used as turbulent boundary layer flow noise and this model was applied to the frequency density function. Characteristics of transfer function according the kx wave number were simulated and design parameters were thickness of elastomer, density, and modulus of elasticity. Based on the simulation results when increasing the thickness of elastomer noise reduction was increased. This results can be applied to the design of conformal array of UUV.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.161-165
• /
• 2014

In this paper, we proposed the fuzzy prototype pattern classifier. In the proposed classifier, each prototype is defined to describe the related sub-space and the weight value is assigned to the prototype. The weight value assigned to the prototype leads to the change of the boundary surface. In order to define the prototypes, we use Fuzzy C-Means Clustering which is the one of fuzzy clustering methods. In order to optimize the weight values assigned to the prototypes, we use the Differential Evolutionary Algorithm. We use Linear Discriminant Analysis to estimate the coefficients of the polynomial which is the structure of the consequent part of a fuzzy rule. Finally, in order to evaluate the classification ability of the proposed pattern classifier, the machine learning data sets are used.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1335-1341
• /
• 2011

The purpose of this research is to investigate how separated and reattached flow affects mass transfer, by comparing the local mass transfer characteristics on an inclined flat plate with those on a parallel flat plate. The local mass transfer coefficients for the flat plate were measured using the naphthalene sublimation technique; the inclined angle of the flat plate was varied from $-10^{\circ}$ to $10^{\circ}$ at $5^{\circ}$ intervals, and the free-stream velocity was varied from 2m/s to 15m/s. At positive inclined angles, the local Sherwood numbers decreased gradually because the boundary-layer thickness increased. On the other hand, for negative inclined angles, the local Sherwood numbers assumed the minimum value at the separation point of the recirculation flow and the maximum value at the reattachment point. The average Sherwood numbers for both positive and negative inclined angles were lower than those in the case of the parallel plate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.237-237
• /
• 2011

효율적인 지하수 관리를 위해서는 시공간적인 변동성을 고려한 지하수 함양률의 정량적 산정이 필수적이다. 본 연구에서는 지표수-지하수 연동해석이 가능하며 토지이용 특성과 국내 토양특성을 가장 잘 표현할 수 있는 한국형 장기 유출 모형 SWAT-K를 이용하여 진천지역의 분포형 지하수 함양량을 산정하였다. 행정경계와 수자원단위지도에서 제시하는 표준단위유역을 기준으로 하여 진천군을 포함하는 미호천유역을 SWAT-K 구동을 위한 모델영역으로 설정하여 주하도를 따라 34개의 소유역으로 구분하였다. SWAT-K를 구동하기 위해서는 기상 및 수문자료를 구축해야 하는데 강우량을 비롯하여 기온, 풍속, 일사량, 상대습도 등의 기상자료가 요구된다. 본 연구에서는 대상유역 내에 위치한 청주, 충주, 대전, 이천, 보은, 천안 기상관측소의 자료를 이용하여 기상자료를 구축하였으며, 모형의 계산시간, 모형결과의 정확도 등을 판단하여 30m 공간해상도를 가지는 DEM을 300m 공간 해상도로 가공하여 사용하였다. 토지이용도는 모의시 다양한 토지이용상태를 반영할 수 있도록 중분류(1:25,000) 토지이용도를 사용하였다. 토양도는 국립농업과학원에서 토양도 전산화 사업을 통해 구축된 1:25,000 축척의 정밀토양도를 사용하였다. SWAT-K를 이용하여 진천군을 포함한 미호천 전체유역에 대해 지표수-지하수 통합 물수지 분석 결과(2004년~2009년) 연평균 강수량 대비 유출률은 66.6%, 증발산률은 34.6%, 함양률은 20.8%로 나타났다. 지표수 유출과정과 지하수위 변동을 동시에 고려하여 산정한 소유역별 연간 함양량 결과를 산정하였고, 총 34개의 소유역별 연간 지하수 함양량을 제시하였다. 또한 SWAT-K 모형을 이용한 모델 영역중 진천군에 속하는 행정구역별, 표준권역별 연평균 함양량을 산출하였으며, 그 분석 결과 진천군 평균 함양률은 20.5%로 산정되었다.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.383-392
• /
• 2006

Calcium carbonate stone deterioration has been intensified in urban area, mainly due to the action of atmospheric pollutant. Samples from the black surface layer were examined under petrographic and scanning electron microscope, coupled with energy dispersive X-ray analyser X-ray fluorescence and X-ray diffraction analysis was also carried out for chemical composition and mineral phase analysis, respectively. Moreover, sulphur isotope ratio was measured, in order to identify the origin of sulphate compounds in the black surface layer. Optical and electronic petrographic analysis indicated that gypsum and Quartz were contained in the black surface layer and led to microcracks. Microstructure and chemical composition analysis showed that the interface between black layer and original stone is not black but its characteristic is similar to black layer The results indicated that during deterioration process the black layer can be expanded gradually into the interface by adsorption of atmospheric pollutants. The sulphur isotope analysis demonstrates that there are different origins of the sulphur component in black surface layer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.762-765
• /
• 2013

This paper analyzed the change of subthreshold current for gate oxide thickness of double gate(DG) MOSFET. Poisson's equation had been used to analyze the potential distribution in channel, and Gaussian function had been used as carrier distribution. The potential distribution was obtained as the analytical function of channel dimension, using the boundary condition. The subthreshold current had been analyzed for gate oxide thickness, and projected range and standard projected deviation of Gaussian function. Since this analytical potential model was verified in the previous papers, we used this model to analyze the subthreshold current. Resultly, we know the subthreshold current was influenced on parameters of Gaussian function and gate oxide thickness for DGMOSFET.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.768-771
• /
• 2013

This paper analyzed the change of subthreshold current for channel doping concentration of double gate(DG) MOSFET. Poisson's equation had been used to analyze the potential distribution in channel, and Gaussian function had been used as carrier distribution. The potential distribution was obtained as the analytical function of channel dimension, using the boundary condition. The subthreshold current had been analyzed for channel doping concentration, and projected range and standard projected deviation of Gaussian function. Since this analytical potential model was verified in the previous papers, we used this model to analyze the subthreshold current. As a result, we know the subthreshold current was influenced on parameters of Gaussian function and channel doping concentration for DGMOSFET.