• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.41-47
• /
• 2002

Turbulent wake behind a ship propeller has been investigated using the adaptive hybrid 2-frame PTV(Particle Tracking Velocimetry). 400 instantaneous velocity fields were measured according to 4 different blade phases and ensemble-averaged to investigate the spatial evolution of the vortical structure of near wake within one propeller diameter downstream. The phase averaged mean velocity fields show the potential wake and the viscous wake formed by the boundary layers developed on the blade surfaces. As the tip vortex evolves downstream, the slipstream is contracted and the turbulent intensity is decreased with viscous dissipation and turbulent diffusion.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.15-22
• /
• 2005

In this paper, we propose a PID-PD controller and its tuning method to be modified form of PID controller that consist of the affine set of PID and PI-PD controller by analyzing relation between these controllers. The proposed tuning method controls the closed-loop system to locate between the step responses of system controlled by PID and PI-PD controller. The controller is designed by the optimum tuning method to minimize the proposed specific cost functions. Its effectiveness is examined by the case studies and their analysis.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.252-262
• /
• 1992

The intent of this study is to develop an efficient calculation method which can be used to analyze the heterogeneous time-dependent reactor problems. By using the nodal theory one can not only reduce the calculational efforts, but accurately determine the group dependent flux densities averaged over the entire homogeneous nodes. This method uses correction factors(called“discontinuity factors”) in a rigorous manner to obtain the relationship between the node-averaged flux and the surface-averaged fluxes and currents. The discontinuity factors are calculated from the node-averaged fluxes, diffusion coefficients, and the discontinuity factors of the previous time step. The test results for two benchmark problems demonstrate the accuracy and efficiency of the method developed for the transient application in which assembly-size nodes can be used.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.42-47
• /
• 2010

본 연구에서는 2005~2007년 여름철(JJAS; 6~9월) 기간에 한반도 부근의 위성관측(TRMM) 및 지상관측(AWS) 강수량 그리고 대기오염 관측 자료를 이용하여 이들의 공간적 분포와 일주기 특성을 분석하였다. 이 기간에 AWS 평균 강수량은 전국적으로 약 5 mm/day 이었고, 제주도, 중부 내륙, 그리고 영 호남 경계 지역에서 9 mm/day 이상으로 많았다. PM10 (${\mu}g/m^3$) 미세먼지의 농도는 $27{\sim}57\;{\mu}g/m^3$ 이었고, 특히 수도권과 경남의 산업지역에서 $45\;{\mu}g/m^3$ 이상으로 높았다. 위성관측과 지상관측 강수량간의 상관(~0.8)은 매우 유의적이었다. AWS는 지점 관측이고 TRMM 관측은 면적평균임을 고려할 때, 위의 상관값은 상당히 높은 것으로 판단된다. 일주기 분석에서 미세먼지는 수도권 지역에서 오전에, 그리고 영남 지역에서는 오후 늦게 많이 발생하였다. AWS 강수량은 영동 및 경북 지역에서 이른 오전(2~8시)에, 이 지역 외에서는 오후 늦게(16~22시) 주로 발생하였다. 중부 지방의 강수 주기는 전선이 오후 3시부터 다음날 오전 4시까지 서해안에서 동해안으로 동진하는 형태를 잘 반영하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.521-531
• /
• 2001

This paper presents the extraction scheme of the scattered waves by a target above the ground using the buried antenna in a lossy and dispersive medium. The half wave dipole antennas are used to transmit and to receive a signal. The transmission line model as a feeding model is considered to take into account the effect of transmission line in a real system. The ground is modeled by the 2nd order Debye approximation with the dispersion and loss. PLRC algorithm and DPML as absorbing boundary condition are utilized to apply the 2nd order Debye approximation to FDTD. To extract the scattered wave, in addition, we employed the delay time extraction algorithm. The simulations are conducted to observe the variation of magnitude in scattered wave and detection of target position according to the change of moisture content of the lossy medium.

• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.131-139
• /
• 2011

This study is to examine architectural designers' views on the correlations between components and contextual principle of the roadside building facade with the roadside building facade on the border of Asian Culture Center in Gwangju which is expected to undergo a great change by public policies. For setting direction of the roadside building management at the region examined, height of facade, advertisement/signboard, security of continuity through surface pattern management, nodes building, array of height by story, awning/arcade and locality of advertisement/signboard should be induced to design with locality and consideration of local characteristics with silhouette, window and external colors is needed for discrimination from other cities. Regarding the realization method important thing was found that the planning and implementation of architectural design guidelines, architectural aesthetics of the pre-hearing enhancement, active citizen participation, and then additional landscape screening system, incentive schemes, landscape designation of landscape zone was found to be a major realization system.

• Journal of the Korean Society of Safety
• /
• v.7 no.1
• /
• pp.39-45
• /
• 1992

The impulsive stress and wave propagation of a glass/epoxy laminate subjected to the transverse low-velocity impact of a steel ball are investigated theoretically and experimentally. A plate finite element model based on Whitney and Pagano's theory In consunchon with experimental contact laws is used for the theoretical investigation. The specimens fo, statical indentation and impact test we composed of ［0/45/0/-45/0］$_{2s}$ and ［90/45/90/-45/90］$_{2s}$ stacking sequences and have clamped-simply supported boundary conditions. Finally, these two results are compared and then the impulsive stress and wave propagation characteristics of this laminated composite are studied.ied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.556-562
• /
• 2006

In this paper, macro diversity coding methods are proposed to efficiently transmit broadcast packet data over mobile cellular networks based on OFDM. In the method, cells are divided into multiple cell groups which transmit one of two orthogonal branches in a transmit diversity code. Furthermore, a coded packet is partitioned into the subblocks for which different cell group combinations are assigned to transmit two different branches. The methods extend the cell coverage at the same transmit power due to the transmit diversity of each symbol and coding diversity obtained through different fading statistics over the subblocks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.53-58
• /
• 2003

Carbon fiber sheet has been used to rehabilitate many types of reinforced concrete members with its superior characteristics such as their lightweight, high strength, corrosion resistance, and easy execution. But the failure behavior of reinforced concrete members show a high variation by the bond characteristics between carbon fiber sheet and concrete surface. In this study, a bond stress-slip model, which accounts for changes in bonding behavior between concrete and carbon fiber sheet with some link elements, is proposed. The link elements are used to represent the concrete-carbon fiber sheet interface. To investigate the efficiency of this method, the analytical solutions for the behavior of reinforced concrete beam strengthened with carbon fiber sheet are compared with experimental ones. Results from the proposed model comparatively well agree with the experimental results.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.185-191
• /
• 1997

Beam - and arch-like structures are two-dimensional bodies characterized by the fact of small thickness compared to the length of structures. Owing to this geometric feature, linear displacement approximations through the thickness such as Kirchhoff and Reissner-Mindlin theories which are more accessible one dimensional problems have been used. However, for accurate analysis of the behavior in the regions where the state of stresses is complex, two-dimensional linear elasicity or relatively high order of thickness polynomials is required. This paper analyses accuracy according to the order of thickness polynomials and introduces a technique for model combination for which several different polynomial orders are mixed in a single structure.