• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.625-632
• /
• 2011

The ignition characteristics of a $CH_4$/hot air counterflow diffusion flame were investigated numerically using a flame-controlling continuation method. For the chemical reactions, the GRI-v1.2 reaction mechanism was used in the simulation. The maximum flame temperature was presented in the space of the inverse global strain rate, and showed S-curve-type behavior. The flame temperatures and velocities of the upper and middle branches were compared for different global strain rates. In addition, the global strain rate was compared with the local strain rates defined at the flame surface and the boundaries of the fuel and oxidizer sides of the fuel/air mixing layer. These local strain rates correlated well with the global strain rate.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.24-30
• /
• 2001

This article is concerned with automatic segmentation for Korean speech signals. All kinds of transition cases of phonetic units are classified into 3 types and different strategies for each type are applied. The type 1 is the discrimination of silence, voiced-speech and unvoiced-speech. The histogram analysis of each indicators which consists of wavelet coefficients and SVF (Spectral Variation Function) in wavelet coefficients are used for type 1 segmentation. The type 2 is the discrimination of adjacent vowels. The vowel transition cases can be characterized by spectrogram. Given phonetic transcription and transition pattern spectrogram, the speech signal, having consecutive vowels, are automatically segmented by the template matching. The type 3 is the discrimination of vowel and voiced-consonants. The smoothed short-time RMS energy of Wavelet low pass component and SVF in cepstral coefficients are adopted for type 3 segmentation. The experiment is performed for 342 words utterance set. The speech data are gathered from 6 speakers. The result shows the validity of the method.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.82-89
• /
• 1996

Application fields of ultrasonic transducers can be divided into two categories, a high ultrasonic resolution required field and a high ultrasonic power required field. This paper is aimed to determine the optimal properties of the matching layers of the transducer for each of the applications. Further, it is aimed to optimize the properties of the matching layers that show satisfactory performances for both of the application fields. Through the direct time domain analysis of the transmission and reflection behavior of the ultrasonic wave, apart from the conventional equivalent circuit analysis, and Fourier transformation of its results, we found the optimum acoustic impedances of the matching layers. The newly determined layers provide much better transducer performance-57% at most-than those obtained with conventional design methods. Based on the results, we also found the optimal acoustic impedances of the layers good for both of the application fields. For te optimization, we developed a new transducer performance evaluation parameter that can be applied to any type of ultrasonic transducers.

• Journal of fish pathology
• /
• v.11 no.2
• /
• pp.89-96
• /
• 1998

Marine birnavirus (MABV) has wide host range in marine organisms. To clarify various infection properties of MABV in different host species, in vitro study was performed by subculture for 10 passages in several fish cell lines. In CHSE-214, RTG-2 and RSBK-2 cells, the virus produced high yield of virus. Typical CPE with high protein expression was observed in these cells. On the contrary, the virus grown in EPC, FHM and BF-2 cells exhibited no CPE appearance although virus protein was detected. In EPC and FHM cells, the virus titer increased in later passages. The plaque size was distinctly bigger in CHSE-214, RTG-2 and RSBK-2 cells than in other cell lines. The nucleotide sequence of VP2/NS junction region on genome segment A exhibited one specific nucleotide change at 195. The different infection properties in several cell types performed in the present work might reflect in vivo MABV infection in various host species occurring in natural conditions.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.39-45
• /
• 2006

This study was investigated the thermal properties of underfill with various epoxy resins using thermal analysis methods such as differential scanning calorimetry (DSC), thermo gravimetry analysis (TGA), dynamic mechanical analysis (DMA) and thermo-mechanical analysis (TMA). And, the adhesion strength of the underfills/FR-4 substrate was evaluated. The glass transition temperature (Tg) of underfill which was composed the cycolaliphatic epoxy resin was lower than that of underfill which was not composed the cycolaliphatic epoxy resin. The thermal degradation of underfill was composed of two processes, which involved chemical reactions between the degrading polymer and oxygen from the air atmosphere. The coefficient of thermal expansion (CTE) of underfill which was composed the cycolaliphatic epoxy resin was higher than that of underfill which was not composed the cycolaliphatic epoxy resin. The excessive curing temperatures caused a weak boundary layer of epoxy resin, which resulted in a deterioration of mechanical properties in the epoxy resin and thus led to poor adhesion property between the underfill/FR-4 substrate.

• Journal of the Korean Institute of Gas
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2012

The present study has been carried out to analyze the flow characteristics in the inlet expasion duct of a heat recovery steam generator by using numerical flow analysis. The inlet of HRSG corresponds the outlet of gas turbine exit and the flow after gas turbine has strong swirl flow and turbulence. The inlet flow condition of HRSG should be included the exit flow characteristics of gas turbine. The present numerical analysis adopted the flow analysis result of gas turbine exit flow as a inlet flow condition of HRSG analysis. Because the flow characteristics in the inlet duct of the tube bank is strongly related to the performance of a HRSG, it is most important for the optimal design of HGSG to understanding the flow phenomena in the inlet duct of HRSG. From the present study, the position of breakpoint in the inlet expansion duct should be lower than the reference breakpoint position for the optimal flow uniformity before the tube bank.

• Composites Research
• /
• v.23 no.3
• /
• pp.50-57
• /
• 2010

It is important to detect fibers in the sectional image of fiber reinforced cementitious composites (FRCC), since the fiber distribution is a crucial factor to predict or evaluate the mechanical performance of FRCC. In this paper, we investigated the fluorescence characteristics of Polyvinyl Alcohol (PVA) fibers, Polyethylene Terephthalate (PET) fibers, Polyethylene (PE) fibers, and Polypropylene (PP) fibers used in Engineered Cementitious Composites (ECC), which is a special kind of FRCC that incorporates synthetic fibers and exhibits extremely ductile behavior in uniaxial tension, to detect each fiber according to its type. Furthermore, optimum excitation and emission wavelengths were proposed on the basis of maximum difference of Relative Fluorescence Intensity (RFI) between two types of fibers used in the hybrid ECC. Optimum threshold values to discriminate two types of fibers using statistical tools were also proposed. Finally, images of four types of fibers obtained using a fluorescence microscope are compared.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.957-964
• /
• 2011

This investigation presents a finite element method to obtain the transmission properties of bulk elastic waves in piezoelectric band gap structures(phonon crystals) for varying frequencies and modes. To this end, periodic boundary conditions are imposed on a three-dimensional model while both in-plane and out-of-plane modes are included. In particular, the mode decoupling characteristics between in-plane and out-of-plane modes are identified for each electric poling direction and the results are incorporated in the finite element modeling. Through numerical simulations, the proposed modeling method was found to be a useful, effective one for analyzing the wave characteristics of various types of piezoelectric phononic band gap structures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.615-624
• /
• 2014

The fin-tube heat exchanger being used for industrial boiler, radiator, refrigerator has been conducted in various studies to improve it's performance. In this study, the characteristics of heat transfer and pressure drop was theoretically analyzed according to longitudinal pitch, location of vortex generator, bump phase and number of the tube surface about the plain fin-tube heat exchanger. The boundary condition for the CFD (Computational Fluid Dynamics) analysis applied with the SST (Shear Stress Transport) turbulence model assumed as the tube surface temperature of 333 K, the inlet air temperature of 423-438 K and the inlet air velocity of 1.5~2.1 m/s. The analysis results indicated that the heat transfer coefficient is not affected highly by the longitudinal pitch, and the heat transfer characteristics was more favorable when the vortex generator was located in front of the tube. Also the bump phase of the tube surface indicated that circle type was more appropriate than serrated type and triangle type in the characteristics of heat transfer and pressure drop, and the sixteen's bump phase of circle type was most favorable.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.218-218
• /
• 2011

낙동강은 4대강 살리기 사업에 의해 8개의 보(상주보, 낙단보, 칠곡보, 강정보, 달성보, 합천보, 함안보)가 하천 내에 건설되고 약 4억톤의 준설이 실시되면서 지형적으로 막대한 변화를 맞이하게 된다. 낙동강은 상류의 안동댐 및 임하댐에서 방류수, 중류의 구미 및 대구 등의 오염원 그리고 하류의 남강에 의한 영향 및 낙동강 하구언에 의한 정체에 의한 영향으로 지역적으로 수질 및 수리 특성이 서로 다르게 나타나고 있다. 낙동강에 건설되는 수중보들 또한 이러한 유입 및 경계 조건에 따라 서로 다른 수질특성을 나타낼 것으로 판단되며 이에 대한 영향을 미리 예측하고 발생 가능한 악영향에 대한 대안을 수립하는 것이 중요하다고 본다. 본 연구에서는 낙동강의 4대강 사업에 의한 지점별 및 시기적 영향을 정확하게 분석하기 위해 3차원 수리동역학 모델 EFDC와 수질모델 WASP을 연계하여 사용하였다. 연구대상지역은 안동댐 방류지점에서 낙동강 하구역까지의 총 334km의 지역을 포함하였으며 하천의 폭 방향, 수심방향 및 흐름방향에 대하여 3차원으로 격자를 구성하여 하천을 표현하였다. 수리 및 수질 보정에 필요 한 입력자료는 국토해양부 및 환경부 등에서 발표 된 자료를 이용하였으며 2007년을 기준으로 모의를 실시하였다. 4대강 살리기 사업에 의한 8개의 보 건설 및 낙동강 전역의 준설의 영향을 예측하여 사업 전 및 사업 후로 각각 구분하여 비교하였으며 사업 후 체류시간의 증가와 준설로 인한 수심증가에 따른 복합적인 원인에 의해 수질에 영향이 미치는 것으로 나타났다. 사업 후 낙동강의 각 수중보 출구 부근 지점에서 예측된 수질 특성은 사업전에 비하여 $BOD_5$는 전반적으로 감소하나, TN 및 TP 는 유사한 특성을 나타내었다. 그러나 Chl-a 농도는 상류와 중류에서는 체류시간의 증가로 증가하는 경향을 나타내었으며 이는 수질이 양호한 상류 지역에서 특히 큰 차이를 나타내는 경향으로 분석되었다. 그러나 낙동강 하구언 지역은 Chl-a 농도가 사업에 의해 약간 감소되는 경향을 나타내어 여타 구간과 다른 경향을 나타내었다. 이는 낙동강 하류의 Chl-a 농도가 이미 매우 높은 상태에서 체류시간에 의한 성장 촉진 보다는 수심증가로 인한 광량제한 효과가 더욱 지배적으로 나타난 것에 의한 영향으로 추정된다.