• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.5
• /
• pp.343-351
• /
• 2012

In this study, shallow-water design waves are calculated for the return period of 10, 20, 30, and 50 years, based on the extreme value analysis of the wave measurement data at Gangneung beach. These values are compared with the results of SWAN simulation with the boundary condition of the deep-water design waves of the corresponding return periods at the Gangneung sea area provided by the Fisheries Agency (FA, 1988) and Korea Ocean Research & Development Institute (KORDI, 2005). It is found that the shallow-water wave heights at Gangneung beach calculated by the deep-water design waves were significantly less than the observation data. As the return period becomes higher, the significant wave heights obtained by the extreme value analysis becomes higher than those computed by SWAN with the deep-water design waves of the corresponding return periods. KORDI computed the hindcast wave data from January 2004 to August 2008 by WAM with a finer-grid mesh system than those of previous studies. Comparisons of the wave hindcast results with the wave observation show that the reproducibility of the winter-season storm wave was considerably improved compared to the hindcast data from 1979 to 2003. Hereafter, it is necessary to carry out hindcast wave data for the years before 2004 using WAM with the finer-grid mesh system and to supplement the deep-water design wave.

• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.135-146
• /
• 2007

FLDWAV model was modified such that it can adequately simulate the effect of Jamsil and Singok submerged weirs in the main reach of the Han River. The enhanced model combines weir-type discharge equations for overflow at fixed weir and Manning equation for fluvial-type flow at the movable weir. Equations for weir overflow include those for submerged weir flow and free overflow. Gates of the movable weir may be open or closed for the simulation. In order to test the simulation capabilities, the enhanced model was applied for various flow conditions at submerged weirs. Backwater effect due to Jamsil and Singok submerged weirs were well simulated. Simulations were carried out for spring and neap tides extracted from artificial tide generated by combining $M_2\;and\;S_2$ tidal constituents. Simulation results cleared indicated that tidal effect extends further upstream as the flood discharge decreases. Low flow simulation capabilities of the enhanced model was tested. Discontinuities of water surface elevation due to the submerged weirs were successively simulated.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.33-45
• /
• 2022

A series of model tests were performed in this study to demonstrate the clogging mechanism created during the installation of a compaction pile to improve soft ground. The application of an air-jet to extrude sand or aggregates from a casing during the installation of a compaction pile imposes a remarkably high-pressure difference between the composite soil layers of clay and sand (or aggregates), resulting in severe clogging. Therefore, a one-dimensional testing system was developed to simulate composite soil layers consisting of clay and sand (or aggregates) and to apply a high-pressure differential at both boundaries, thus replicating the extrusion process used in compaction pile installation. Herein, the performance of two construction materials for compaction piles of crushed stone and grading-controlled aggregates was compared. A series of one-dimensional model tests were performed under multiple pressure settings, with clogging depth and permeability measured in each case. Results indicate that, blinding clogging mechanisms and blocking defined by previous studies were observed for crushed stone, and a new mechanism of "infiltration" was revealed and defined. Whereas, the controlled aggregates performed excellently against clogging because only blinding was observed.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.51-66
• /
• 2006

The climate of the last glacial maximum (LGM) in northeast Asia is simulated with an atmospheric general circulation model of NCAR CCM3 at spectral truncation of T170, corresponding to a grid cell size of roughly 75 km. Modern climate is simulated by a prescribed sea surface temperature and sea ice provided from NCAR, and contemporary atmospheric CO2, topography, and orbital parameters, while LGM simulation was forced with the reconstructed CLIMAP sea surface temperatures, sea ice distribution, ice sheet topography, reduced $CO_2$, and orbital parameters. Under LGM conditions, surface temperature is markedly reduced in winter by more than $18^{\circ}C$ in the Korean west sea and continental margin of the Korean east sea, where the ocean exposed to land in the LGM, whereas in these areas surface temperature is warmer than present in summer by up to $2^{\circ}C$. This is due to the difference in heat capacity between ocean and land. Overall, in the LGM surface is cooled by $4{\sim}6^{\circ}C$ in northeast Asia land and by $7.1^{\circ}C$ in the entire area. An analysis of surface heat fluxes show that the surface cooling is due to the increase in outgoing longwave radiation associated with the reduced $CO_2$ concentration. The reduction in surface temperature leads to a weakening of the hydrological cycle. In winter, precipitation decreases largely in the southeastern part of Asia by about $1{\sim}4\;mm/day$, while in summer a larger reduction is found over China. Overall, annual-mean precipitation decreases by about 50% in the LGM. In northeast Asia, evaporation is also overall reduced in the LGM, but the reduction of precipitation is larger, eventually leading to a drier climate. The drier LGM climate simulated in this study is consistent with proxy evidence compiled in other areas. Overall, the high-resolution model captures the climate features reasonably well under global domain.

• 순환기질환의공학회:학술대회논문집
• /
• 2005.12a
• /
• pp.25-26
• /
• 2005

동맥경화의 재발생 위치는 속도와 전단응력 등과 같은 혈류역학의 인자들의 영향을 많이 받는 혈관형태를 가진 영역이다. 이러한 결과는 관상동맥에 동맥경화의 발생빈도를 조사한 결과와 일치하고 있으며, 즉 좌전 하행지, 회선지, 및 우관동맥 등의 동맥경화성 병변 발생빈도에서 좌전하행지가 가장 많은 빈도를 나타낸다. 따라서 동맥경화의 발생 및 재형성은 혈관의 동맥경화성 위험지역의 형태적 특징, 즉, 분지부의 위치, 길이, 각도의 변화 등에 따라 달라질 수 있음을 시사한다. 동일한 관상동맥이더라도 동맥경화의 발생이 용이한 형태가 있는데, 혈관의 형태학적 특성에 따란 혈류역학적 특성이 달라지고 동맥경화가 발생할 수 있는 가능성이나 진행과정이 차이가 날 수 있음을 말한다. 특히 임계치를 넘는 고전단응력은 혈관내피세포를 파괴하거나 손상을 주며, 반대로 임계치 미만의 저전단응력은 혈류의 정체시간을 길게 하여 양쪽 모두 동맥경화성 생물학적 반응을 유발 할 수 있며, 고전단응력과 저전단응력의 빈번한 맥동성 변화작용으로 혈관이 손상될 수 있는 한계범위를 넘어서게 될 때 내피세포의 방어체계를 파괴시키거나 혈관성형술후의 신내포세포 형성과정에서 생물학적 활성반응을 촉진하게 되는 환경을 제공하게 되어 동맥경화를 촉진한다고 할 수 있다. 즉 임계치 이상의 고전단응력이 나타나는 형태와 입구경계조건이 발생되면 내피세포 손상에 따른 혈전 현상의 발생가능성이 높아지며, 임계치 미만의 저전단응력이 발생되면 동맥경화성 죽상반 재형성에 영향을 미치게 한다. 결론적으로 동맥경화의 재발생의 기전은 변형된 혈관의 형태학적인 차이와 위치에 따라 서로 다른 혈류역학적 유발할 수 있는 물리적 환경을 제공하는 데에서 출발한다고 할 수 있다.$8.0{\sim}8.3$으로 알카리 쪽으로 이동하였다. 파일롯트 규모로 본 고정화 효소 충전탑(내경 30cm, 높이 85cm)에 의한 이성화당의 생산을 시도하였던바, 고정화 효소(350 IXIU/ml-R) 1리터가 30일동안에 약 293리터의 이성화당을 생산할 수 있는 것으로 나타났다.l plane에서 선수군(選手群)이 $62.7{\pm}7.36^{\circ}$로서 비선수군(非選手群)과 별(別) 차이(差異)가 없었고, horizontalplane에서는 선수군(選手群)이 $-23.5{\pm}7.2^{\circ}$로서 비선수군(非選手群)의 $-38.8{\pm}8.2^{\circ}$에 비(比)해 유의(有意)하게 높았으며 운동후(運動後) 양군(兩群) 모두 유의(有意)하게 높았다. QRS vector 길이에서 Frontal plane에서 선수군(選手群)이 $13.86{\pm}1.44\;mm$로서 비선수군(非選手群)의 $9.62{\pm}0.97\;mm$에 비(比)해 유의(有意)하게 높았으며 운동후(運動後)에도 유의(有意)하게 높았다. Horizontal plane에서도 선수군(選手群)이 $19.82{\pm}2.10\;mm$로서 비선수군(非選手群)의 $16.90{\pm}1.39\;mm$에 비(比)해 유의(有意)하게 높았고 운동후(運動後)에도 선수군(選手群)이 유의(有意)하게 높았다. 이상(以上)을 종합(綜合)해 보면 선수군(選手群)의 R파고(波高)가 비선수군(非選手群)에 비(比)해 운동후(運動後) 계속(繼續) 유의(有意)하게 높았고, $Rv_5$

• Korean Journal of Cognitive Science
• /
• v.20 no.1
• /
• pp.51-77
• /
• 2009

Using a modified Posner's cue-target paradigm, we investigated whether negative cues attract more attention than neutral cues in anxious people. Previous studies used commonly an unbalanced proportion of valid and invalid trials(75% vs. 25% respectively). But in the present study, an equivalent proportion of valid and invalids trials was used for measuring detection speed of cues without participant's expectancy caused by the unbalanced proportion. Emotional words(Experiment 1) and facial expressions(Experiment 2) were used as cues for target locations. The result of Experiment 1 and 2 showed that threatening cues facilitated target detection in valid trials and interfered with it in invalid trials in anxious participants and a, reverse response patterns were found in non-anxious participants. This indicates that threatening cues attract more attention to the cued location in anxious people and in contrast, non-anxious people avoid threatening stimuli. In Experiment 3, we investigated the difference of validity effect across anxiety levels. The results showed that anxious participants gave less attention to cued location when the cues were non-informative whereas non-anxious participants gave more attention to cued locations in the same condition. We discussed two kinds of cognitive bias caused by anxiety levels: attentional bias and proportion related bias.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.62-62
• /
• 2003

Landsat TM 영상을 이용, 명암차가 높은 산악 지역에 적용해왔던 알고리즘을 개선하여 비교적 명암차가 낮고 넓게 분포하는 충적층 지역의 선구조를 추출하는 알고리즘을 개발하였다. 수치지형모델(OEM)에 대하여 Local Enhancement 를 이용해서 평탄한 지역을 선정하여 이로부터 충적층을 추출하였다. Zevenbergen & Thorno's Method를 3×3 moving windowing을 통해서 최대 경사방향과 경사를 구해서 충적층을 지나는 선구조 요소를 추출하고 다시 Hough 변환을 이용해서 1차 선구조를 추출하였다 이를 이용하여 충적층의 직각방향의 지형단면의 경사를 유추해서 spline 보간법을 이용해 단면의 최저점을 구하고 이 구해진 점들을 다시 Hough 변환을 이용해서 최종 선구조를 추출하였다. 본 연구에서 사용한 알고리즘은 기존 알고리즘에서 사용된 소창문보다 훨씬 큰 충적층이 분포하는 지역의 지형 경사가 수렴하는 부분에 선구조가 뚜렷이 나타남을 볼 수 있다. 최대경사방향과 경사를 구해서 얻어진 1 차선구조와 최종 선구조에서 선구조 방향이 다소 차이를 보인다. 1 차 선구조의 수직방향 지형단면의 자료를 이용함에 있어, 지형 단면의 시작정과 끝지점을 임의적으로 결정하는 것이 아니라, 충적층을 가로질러 최고점까지 또는 다음 충적층이 나을 때까지의 자료를 이용해서 보간법을 사용하였고, 충적층의 넓이에 따라 보간할 자료량의 차이에 의한 오차가 발생할 수 있다. 넓은 충적층에서 선구조가 잘 추출되는 반면에 좁은 충적층이 분포하거나 계곡에 해당하는 지역에l서는 경사수렴부와 일치하지 않는 선구조가 추출되었다. 이는 향후 계속적으로 연구해서 보완되어야 할 것으로 사료된다.페클 잡영 제거 정도에 있어 다른 필터들과 큰 차이가 없지만 경계선보존지수는 다른 필터들에 비하여 가장 우수함을 확인할 수 있었다.rbon 탐식효율을 조사한 결과 B, D 및 E 분획에서 유의적인 효과를 나타내었다. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basi

• Korean Journal of Agricultural Science
• /
• v.25 no.1
• /
• pp.97-106
• /
• 1998

This study was carried out to investigate the problem of analysis method of circular sliding, which uses a high rate to work out a countermeasure for landslides. The results of this study were summarized as follows : 1. As a result of the analysis of sliding surface along the soil layers in forty model slopes, the boundary layer in weathered soil and weathered rock indicated a very high possibility of sliding than in other places. 2. Because most landslides in Korea occur along the discontinuity face at the boundary of soil layers, below 2m. from land surface, it is a good method for safe design to work the countermeasure for these kinds of landslides in cutting slopes. 3. When the inclination of slopes is fixed and the length of slopes is changed, the cercular sliding slopes were more safe as the soil layers are more shallow and the length of slopes are shorter, but the safety ratio of infinite sliding slopes was same as the other even though their length of slopes was different. 4. As a result of the analysis by cercular sliding analysis method and infinite sliding analysis method with some condition that the inclination of slopes was $30^{\circ}$ degree, because most landslides in Korea occur at this condition, these methods indicated different results to each other as well as cercular sliding analysis method showed too much safety ratio than infinite sliding analysis method.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.121-140
• /
• 1994

This paper presents the probabilistic model to evaluate the three-dimensional stability of layered deposits and c-0 soil slopes. Rotational slides are assumed with a cylindroid control part terminated with plane ends. And the potential failure surfaces in this study are assumed with the logarithmic spiral curve refracted at boundary of layers. This model takes into consideration the spatial variabilities of soil properties and the uncertainties stemming from insufficient number of samples and the discrepancies between laboratory measured and in -situ values of shear strength parameters. From the probabilistic approxi mate method (FOSM and SOSM method), the mean and variance of safety factor are calculated, respectively. And the programs based on above models is developed and a case study is analysed in detail to study the sensitivity of results to variations in different parameters by using the programs developed in this study. On the basis of thin study the following conclusions could be stated : (1) The sensitivity analysis shown that the probability of failure is more sensitive to the uncertainty of the angle of internal friction than that of the cohesion, (2) The total 3-D proability of failure and the critical width of failure are significantly affected by total width of slope. It is found that the total 3-D probability of failure and the critical width of failure increase with increasing the slope width when seismic forces do not exist and the total 3-D probability of failure increases with increasing the slope width and the critical width of failure decreases when seismic intensity is relatively large, (3) A decrease in the safety factor (due to effect such as a rise in the mean ground water level, lower shear strength parameters, lower values for the correction factors, etc.) would result in reduction in the critical width of failure.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.3
• /
• pp.13-22
• /
• 2012

Even with its significant influence on the dynamic analysis and foundation design of structures, sometimes the soil-structure interaction has been ignored during the design process. One of the reasons is due to the fact that the modeling procedures are too complicated to meet the requirements in practice. In this study, using the Cali(IT)2 building in California with high and frequent seismic activities, the analysis differences for different boundary conditions are reviewed. The Beam on Nonlinear Winkler Foundation Model, one of the foundation modeling methods, is modified for easy use by the Linear Matrix Inequalities Model Reduction Technique. The product of the proposed process is applied to create the Finite Element Model. The results show fairly good agreement with the real data acquired from the Cal(IT)2 building.