• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.1
• /
• pp.23-29
• /
• 1984

소성역학에 의해서 소성가공중의 현상을 해석하여 제품의 형상, 강도, 잔유응력, 가공력, 가공한계 및 결함의 발생등을 견적하고 이것에 의해 가공기계의 강도, 강성 및 제어량등이 결정된다. 또 재질에 대한 지침이 얻어진다. 탄성론이나 소성론에서 경계치 문제는 응력젼위방정식, 응력의 경계조건, 변위에 관한 변위 스트레인 관계식과 변위의 경계조건, 그리고 응력과 스트레인을 관계시 키는 구성방정식으로 되어 있는 기초방정식으로 구성된다. 문제의 구성방정식은 재료의 거동이 매우 복잡하기 때문에 실제의 거동을 충실히 표시 할 수 없다. 재료의 이방성, 유한도형, 이방성주축의 회 전, 가공경화, 고온, 고속가공 등에 의해서 재료의 변형거동은 매우 복잡해진다. 이상의 정량적 고찰 과 전위 또는 결정의 슬립모델과 같은 정성적 고찰도 있다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.499-507
• /
• 2003

As the load is increased on the steel-concrete composite structure, its interface begins to show nonlinear behavior due to the reduction of interaction, micro-crack, slip and separation, and it causes slip-softening, Therefore, it is essential to consider the partial-interaction analysis technique. Until now, however, full-interaction or, in some instances, the linear-elastic model, which are insufficient to simulate accurate behavior, are assumed in the analysis of composite structure since the analysis method and nonlinear model for interface are very difficult and complicated. Therefore, the design of composite structure is followed by the experimental method which is inefficient-because a number of tests have to be carried out according to the design environments. In this study, we carried out the nonlinear analysis according to various interface nonlinear models by interaction magnitude, and analyzed more accurate structural behavior and performance by maximum tangential traction and slip-softening at the interface. As a result of this study. we were able to prove that the nonlinear model of interface more exactly represents behavior after yielding, such as ultimate load: that initial tangential stiffness of interface has a significant effect on the yielding load of structural members or part: and that the maximum tangential traction and slip-softening mainly effects structural yielding and ultimate load. Therefore, the structural performance of composite structure is highly dependent on the steel-concrete interface or interaction, which may result in initial tangential stiffness, maximum tangential traction and slip-softening in nonlinear model.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.60-64
• /
• 1999

In this paper, we apply CART(Classification And Regression tree) and OC1(Oblique Classifier1) which methods are widely used for continuous speech recognition and synthesis. We prediet prosodic boundary index by applying CART and OC1, which combine right depth of tree-structured method and To_Right of link grammar method with tri_gram model. We assigned four prosodic boundary index level from 0 to 3. Experimental results show that OC1 method is superior to CART method. In other words, in spite of OC1's having fewer nodes than CART, it can make more improved prediction than CART.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.165-173
• /
• 2010

In this paper, the dynamic stiffness of scaled boundary finite element method(SBFEM) was analytically derived to represent the non-homogeneous space. The non-homogeneous parameters were introduced as an expotential value of power function which denoted the non-homogeneous properties of analysis domain. The dynamic stiffness of analysis domain was asymptotically expanded in frequency domain, and the coefficients of polynomial series were determined to satify the radiational condition. To verify the derived dynamic stiffness of domain, the numerical analysis of the typical problems which have the analytical solution were performed as various non-homogeneous parameters. As results, the derived dynamic stiffness adequatlly represent the features of the non-homogeneous space.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.383-386
• /
• 2007

허프 변환(Hough transform)은 영상에서 몇 개의 파라미터로 표현되는 기하학적 요소 추출을 위해 널리 사용되고 있는 방법 중 하나이다. 하지만 허프 변환은 영상의 한 픽셀이 허프 공간(Hough space)의 한 방정식에 대응되는 일대다 특성으로 인해 잡음에 민감한 특성을 갖는다. 이러한 잡음 민감성은 검출되는 직선의 개수뿐만이 아니라 검출된 직선의 품질에도 영향을 미칠 수 있다. 즉, 실제 직선에서 벗어난 직선이 검출되거나 하나의 실제 직선에 대해 여러 개의 직선이 검출되는 등의 직선 왜곡이 발생할 수 있다. 이러한 직선 왜곡은 잡음 이외에도 허프 공간의 설정, 특히 각 해상도의 설정에 영향을 받는다. 이 논문에서는 기존의 허프 변환에서 발생하는 이러한 직선 왜곡을 분석하고, 잡음 민감성을 줄이기 위해 제안된 경계선 강도 허프 변환(Edge Strength Hough Transform, ESHT)에서 이러한 왜곡이 적게 발생함을 보인다. 또한 ESHT에서만 발생할 수 있는 왜곡을 분석하고 해결방안을 제시한다. 제시한 방법에 의해 직선의 왜곡이 감소하는 것은 실험 결과를 통해 확인할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.340-340
• /
• 2015

기상이변에 따른 강우강도의 증가는 국지성 집중호우로 나타나게 되고, 이러한 강우양상은 하천에서의 홍수위 증가로 나타나 여러 가지 하천재해가 발생하게 된다. 본 연구에서는 대하천으로 유입되는 지류 합류부에서의 수리학적 특성을 살펴보기 위한 사전 연구로 비교적 규모가 큰 지류하천에 대한 부정류 모의를 수행할 수 있는 홍수추적모형을 구축하였다. 대상 하천은 지류 내 하도가 루프의 형태를 띠고 있는 밀양강을 대상으로 선정하였다. 낙동강의 제1지류인 밀양강에서 낙동강 합류부로부터 30.74 km 상류에 위치한 밀양강의 상동수위관측소를 상류단으로 선정하고 낙동강과 합류하는 밀양강 하류단을 대상구간으로 선정하였다. 상류 경계단인 상동수위관측소에서 측정된 수위자료는 유량자료로 환산하여 상류단 경계조건으로 사용하였으며, 하류단 경계조건은 낙동강 본류의 수산교 수위관측소와 삼랑진 수위관측소에서 측정된 수위자료를 밀양강 합류부까지의 거리 보정을 통해 밀양강 하류단의 수위자료로 사용하였다. 그림 1은 밀양강의 상동수위관측소에서부터 낙동강 합류부까지 구간에 대한 모식도를 나타내고 있으며, 그림 2는 밀양1 지점에 대한 모의결과를 나타내고 있다. 단장천 유입 이후 밀양강 본류가 두 개의 루프형으로 분류되었다가 다시 합류하는 하도의 형태를 가지고 있어 보다 복잡한 검증과정이 요구되었다. 본 연구에서 구축된 밀양강에 대한 수리학적 해석모형은 지류 합류부에서의 배수영향에 의한 수리특성을 분석하는데 활용될 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.728-731
• /
• 2007

Though the Hough transform is a well-known method for detecting analytical shape represented by a number of free parameters, the basic property of the Hough transform, the one-to-many mapping from an image space to a Hough space, causes the innate problem, the sensitivity to noise. To remedy this problem, Edge Strength Hough Transform (ESHT) was proposed and proved to reduce the noise sensitivity. However the performance of ESHT depends on the size of a Hough space and image and some other parameters, which play an important role in ESHT and should be decided experimentally. In this paper, we derived a formula to decide decreasing parameter. Using the derived formulae, the decreasing parameter value can be decided only with the pre-determined values, the size of a Hough space and an image, which make it possible to decide them automatically.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.11-19
• /
• 2010

Most of deblocking filters assumes that the block boundaries are accurately known and the coding information like quantization parameters are available. In some applications such as commercial television, however, many external video inputs without known block boundary and coding information arc given. If a decompressed video sequence heavily degraded with blocking artifacts is given through the external video port, it is absolutely necessary to detect block boundaries and control the strength of deblocking filtering by analysing the given images. This paper presents an efficient method to find the block boundaries and estimate the strength of the blocking artifacts without the knowledge of coding information. In addition, the confidence of the estimated blocking artifact information is also evaluated to control the adaptive deblocking filter robustly. Experiment results show that the estimated block boundary locations and strength relative strength and confidence information are practically good enough to reduce the blocking artifacts without prior knowledge.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.107-115
• /
• 2011

This research studies the behavior of the FRP-concrete interface subjected to two environmental substances. Frist is to investigate the behavior by the application of different bonding materials at the interface between FRP and concrete, second is to understand a long-term performance at the interface by Freeze-thaw actions. The parameters considered in this research are the maximum bonding strength and the effective bonding length at the FRP-concrete interface. In the first experimental phase, three types of specimens are fabricated and tested considering the number of applied bonding materials and the Freeze-thaw tests are performed to evaluate the behavior of the interface in the cycle range of 0 to 300 cycles. Finally, it is known that there is a 5~7% difference of the effective bonding length between applied bonding materials and the values for the maximum stress and the effective length under Freeze-thaw action are varied randomly as the freeze-thaw cycle is increased even though initial reduction of their capacities are occurred.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2024

In order to evaluate the relationship between the ground confining pressure and the shear characteristics of the pile-soil interface, this study described the comparative results of the existing experimental results and the FEA results using the strength reduction factor. The strength reduction factor was applied to simulate the shear behavior of the pile-soil interface in finite element analysis(FEA). The analysis results showed that the maximum pullout resistance decreased due to the influence of low confining pressure, as the fines content increased. This trend was similar to the previous experimental research, and this FEA model simulated with the interface strength reduction factor was evaluated as reasonable. The analysis results of the variation in the interface strength reduction factor clearly showed that the interface strength reduction factor clearly increased at a high fines content when the confining pressure was 50kPa. However, it was found that the increase rate was low when the confining pressure was 100kPa and 150kPa. Therefore, confining pressure and fines content need to be considered in FEA to evaluate the shear behavior of the pile-soil interface.