• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.15-21
• /
• 2019

We investigated the structural, electrical and optical properties of zinc oxide (ZnO) ultra-thin films grown at $150^{\circ}C$ by atomic layer deposition (ALD). Diethylzinc and deionized water were used as metal precursors and reactants, respectively, for the deposition of ZnO thin films. The growth rate per ALD cycle was a constant 0.21 nm/cycle at $150^{\circ}C$, and samples below 50 cycles had amorphous properties due to the relatively thin thickness at the initial ALD growth stage. With the increase of the thickness from 100 cycles to 200 cycles, the crystallinity of ZnO thin films was increased and hexagonal wurtzite structure was observed. In addition, the particle size of the ZnO thin film increased with increasing number of ALD cycles. Electrical properties analysis showed that the resistivity value decreased with the increase of the thin film thickness, which is correlated with the decrease of the grain boundary concentration in the thicker ZnO thin film due to the increase of grain size and the improvement of the crystallinity. Optical characterization results showed that the band edge absorption in the near ultraviolet region (300 nm~400 nm) was increased and shifted. This phenomenon is due to the increase of the carrier concentration with the increase of the ZnO thin film thickness. This result agrees well with the decrease of the resistivity with the increase of the thin film thickness. Consequently, as the thickness of the thin film increases, the stress on the film surface is relaxed, the band gap decreases, and the crystallinity and conductivity are improved.

• Korean Journal of Family Social Work
• /
• no.55
• /
• pp.265-297
• /
• 2017

This study aims to provide basic information about the policy and system improvements relevant to single elderly men, through an investigation concerning the use and needs of activity spaces near their housing environments. Eighteen single elderly men over 60-years-old living in Gunsan city of Jeonbuk province in Korea participated in in-depth interview, and the data were qualitatively analyzed. The results of the study are as follows: The social networks of the participants were focused on friends or colleagues, while mutual exchanges with their children were intermittently undertaken. Natural networks of the elderly were formed mainly in third places, such as parks, restaurants, or community facilities, and about a half of the elderly participants had no spatial needs, and the rest required spaces for meal services, the elderly living community, jobs, leisure/hobby activities, or facility improvements. The elements influencing use of activity spaces were access from the residence, health, social networks, and economic conditions. The results suggest the following: Exercise or leisure facilities supporting elderly mobility should be set up close to their residential environments. Senior facilities centered on systematic supports and shuttle buses circulating around the places that the elderly visit frequently should be considered. On the other hand, regular maintenance and education on residents' proper use of the facilities, and sufficient information and fee discounts for the general programs are needed so that the elderly could interact with the younger generation. From a public perspective, a rational system and policy based on understanding single elderly men's needs should be prepared for provision and management of the activity space.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.3
• /
• pp.26-34
• /
• 2018

This research is a pre-research to find out profit module of 20 students in a classroom. I researched the widths of passages in the 30 classrooms of 5 elementary schools in Nothern Kyeonggi-do. I found the conclusions as follows. 1st, the area of 1 student's unit is $650(W){\times}950(D)$ 2nd, most of classrooms' students table placements are one-way types(77%). U-types are 13%. group study-types are 7% 3rd, The width between blackboard and front student's table is 2.08m. The width of passage between back seat and backboard is 1.12m. The width of passage between side wall and near student's table is 0.89m. The width of passage between window and near student's table is 0.74m. The width of vertical passage(A) between student's tables is 0.68m. The width of vertical passage(B) between student's tables is 0.7m. 4th, The area of teachers' is $2.1m{\sim}2.25m{\times}2.1m=4.41{\sim}4.73m^2$

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.20-26
• /
• 2019

Where hydraulic structures are to be installed over the entire width of a river or stream, usually a bed protection structure is to be installed. However, a local scour occurs in which the river bed downstream of the river protection system is eroded due to the influence of the upstream flow characteristics. This local scour is dominant in the flow and turbulence characteristics at the boundary of the flow direction and in the material of the bed materials, and may gradually become dangerous over time. Therefore, in this study, we compared the turbulence patterns in the local scour hole at the downstream of the river bed protection with the results of the analysis of the mobile bed experiment, and compared with the application of OpenFoam, a three dimensional numerical analysis model. The distribution of depth-averaged relative turbulence intensities along the flow direction was analyzed. In addition to this result, the stabilization of scour hole was compared with the bed shear stress and Shields parameter, and the results were compared by changing the initial turbulent flow conditions. From the results, it was confirmed that the maximum depth of generation of the three-stage was dominantly developed by the magnitude of depth-averaged relative turbulence intensity rather than the mean flow velocity. This result also suggests that design, construction or gate control are needed to control the depth-averaged relative turbulence intensities in order to reduce or prevent the local scour faults that may occur in the downstream part of the bed protection.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.320-333
• /
• 2019

In this study, a physics-based 3D morphology model for the estimation of an erosion rate of nourished beach is newly proposed. As a hydrodynamic module, IHFOAM toolbox having its roots on the OpenFoam is used. On the other hand, the morphology model comprised a transport equation for suspended sediment, and Exner type equation derived from the viewpoint of sediment budget with the bed load being taken to accounted. In doing so, the incipient motion of sediment is determined based on the Shields Diagram, while the bottom suspended sediment concentration, the bed load transport rate is figured out using the bottom shearing stress directly calculated from the numerically simulated flow field rather than the conventional quadratic law and frictional coefficient. In order to verify the proposed morphology model, we numerically simulate the nonlinear shoaling, breaking over the uniform beach of 1/m slope, and its ensuing morphology change. Numerical results show that the partially skewed, and asymmetric bottom shearing stresses can be successfully simulated. It was shown that sediments suspended and eroded at the foreshore by wave breaking are gradually drifted toward a shore and accumulated in the process of up-rush, which eventually leads to the formation of swash bar. It is also worth mentioning that the breaker bar formed by the sediments dragged by the back-wash flow which commences at the pinnacle of up-rush as the back-wash flow gets weakened due to the increased depth was successfully duplicated in the numerical simulation.

• The Journal of Korean Philosophical History
• /
• no.41
• /
• pp.247-270
• /
• 2014

Multiculturalism may be deeply connected with the diversities of cultures and enlightenment discussed in the context that we live together with the specification of cultures derived from any spatial conditions overtly and covertly. People live on their own customs compatible with their space and the time, and they make their boundaries of races, nations, and national memories. In such a way each of them treats each other exclusively and is inclined not to recognize being of the others. Also people are apt to recognize the others unessentially and overlook the others's value and way of life. As a result they might destroy the foundation of symbiotic livings conditions on their own. On the other hand they pretend to search for the cultural diversities of the others and include them under their own universalities, resulting in conflicts. Hence it is required that we should make an efforts to prepare the fields for living together through getting over the problem of the recognition of matters and affairs before us. From the above-told critical mind this thesis seeks the multicultural relativities and more arrives at the relationalities discussed by East-Asiatic philosophers of Chuang Tzu and Ch'oe Han-gi. Especially by gazing at the idea of the interconnectedness which means activities, changeabilities and mobilities, appeared on the idea of Ch'oe Han-Gi's revolving transformation, it is stressed that the communications of the local with each other in the various aspects of, e.g. materials, regions and cultures should be achieved.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.4
• /
• pp.60-69
• /
• 2020

This research is a preliminary study to find out the module of 20 students in a classroom. This research investigated the widths of passages in the 30 classrooms of 5 elementary schools in Namyangju City, Korea. The conclusions were as follows: First, the area of unit for 1 student was 650 (W) × 950 (D). Second, the desk placements for most classrooms were one-way types (87%), and group-study types constituted 13%. Third, the width between the blackboard and the very front desk was 2.17 m. The width of passage between the very back seat and the backside lockers was 1.32 m. The width of passage between the sidewall and the nearby desk was 0.8 m. The width of passage between the window and the nearby desk was 0.8 m. The average widths of 2 vertical passages between the desks were respectively 0.67 m and 0.68 m. Fourth, the area of the teacher was 2.1-2.25 m × 2.16 m = 4.5-4.8 ㎡.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.967-977
• /
• 2022

The occurrence and intensity of wildfires are increasing with climate change. Emissions from forest fire smoke are recognized as one of the major causes affecting air quality and the greenhouse effect. The use of satellite product and machine learning is essential for detection of forest fire smoke. Until now, research on forest fire smoke detection has had difficulties due to difficulties in cloud identification and vague standards of boundaries. The purpose of this study is to detect forest fire smoke using Level 1 and Level 2 data of Geostationary Environment Monitoring Spectrometer (GEMS), a Korean environmental satellite sensor, and machine learning. In March 2022, the forest fire in Gangwon-do was selected as a case. Smoke pixel classification modeling was performed by producing wildfire smoke label images and inputting GEMS Level 1 and Level 2 data to the random forest model. In the trained model, the importance of input variables is Aerosol Optical Depth (AOD), 380 nm and 340 nm radiance difference, Ultra-Violet Aerosol Index (UVAI), Visible Aerosol Index (VisAI), Single Scattering Albedo (SSA), formaldehyde (HCHO), nitrogen dioxide (NO₂), 380 nm radiance, and 340 nm radiance were shown in that order. In addition, in the estimation of the forest fire smoke probability (0 ≤ p ≤ 1) for 2,704 pixels, Mean Bias Error (MBE) is -0.002, Mean Absolute Error (MAE) is 0.026, Root Mean Square Error (RMSE) is 0.087, and Correlation Coefficient (CC) showed an accuracy of 0.981.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.110-115
• /
• 2023

During the Hg₂Br₂ physical vapor transport process, with increasing the partial pressure of component B, P_B from 40 Torr to 200 Torr, a unicellular convective flow structures move from the crystal growth region to the center region in the vapor phase. The boundary layer flow is dominant for P_B = 40 Torr, and the core region flow is dominant for P_B = 200 Torr. The flow in the vapor phase shows a three-dimensional convective flow structure with a single cell (unicellular) for P_B = 40 Torr and 200 Torr, exhibits an asymmetrical flow with respect to the x, y central axis under the horizontally oriented configuration with an aspect ratio (length-to-width) of 3 and linear conducting walls. The critical temperature difference between the source and crystal region is about 30 K. The total molar flux of Hg₂Br₂ increases with the temperature difference until the total molar flux reaches the critical value. At the critical total molar flux, the total molar flux abruptly decreases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.249-256
• /
• 2022

Various studies are being actively conducted to show that the real-time visualization technology that combines BIM (Building Information Modeling) and AR (Augmented Reality) helps to increase construction management decision-making and processing efficiency. However, when large-capacity BIM data is projected into AR, there are various limitations such as data transmission and connection problems and the image cut-off issue. To improve the high efficiency of visualizing, a mesh optimization algorithm based on the k-nearest neighbors (KNN) classification framework to reconstruct BIM data is proposed in place of existing mesh optimization methods that are complicated and cannot adequately handle meshes with numerous boundaries of the 3D models. In the proposed algorithm, our target BIM model is optimized with the Unity C# code based on triangle centroid concepts and classified using the KNN. As a result, the algorithm can check the number of mesh vertices and triangles before and after optimization of the entire model and each structure. In addition, it is able to optimize the mesh vertices of the original model by approximately 56 % and the triangles by about 42 %. Moreover, compared to the original model, the optimized model shows no visual differences in the model elements and information, meaning that high-performance visualization can be expected when using AR devices.