• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.68-74
• /
• 2003

SHARP numerical model was used to estimate the interface, ranges and seasonal variations of seawater intrusion. The interface obtained from the SHARP model represented more sensitive to seasonal variations than that estimated from the monitoring wells. When TDS and groundwater velocity vector distributions generated by SUTRA simulations are compared to the interfaces obtained from SHARP simulation, the difference of the range on seawater intrusion is less than 50 m, and the range of seawater intrusion from seasonal variations has the difference of about 12 m. These differences are small for the numerical simulation of the coastal aquifer at regional scale. Therefore, the model with sharp interface is very useful to estimate the interface at this study site, where is regional aquifer system in the scale of seawater infusion. However the SHARP model have some limitations in simulating the range of seawater intrusion, when the hydrodynamic dispersion is significant for seawater intrusion at local aquifer system.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2000

This paper proposes a non-self-intersecting multiresolution deformable model to extract and reconstruct three-dimensional boundaries of objects from volumetric data. Deformable models offer an attractive method for extracting and reconstructing the boundary surfaces. However, convensional deformable models have three limitations- sensitivity to model initialization, difficulties in dealing with severe object concavities, and model self-intersections. We address the initialization problem by multiresolution model representation, which progressively refines the deformable model based on multiresolution volumetric data in order to extract the boundaries of the objects in a coarse-to-fine fashion. The concavity problem is addressed by mesh size regularization, which matches its size to the unit voxel of the volumetric data. We solve the model self-intersection problem by including a non-self-intersecting force among the customary internal and external forces in the physics-based formulation. This paper presents results of applying our new deformable model to extracting a sphere surface with concavities from a computer-generated volume data and a brain cortical surface from a MR volume data.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.64-68
• /
• 1996

수중음파전달 모델은 benchmark 시험을 통해 정확도, 적용범위, 계산시간 등의 성능을 평가받는다. 본 논문에서는 analytic 모델, 정상 모드 모델(normal mode model), 포물선 방정식 모델(parabolic equation model), 가우시안 빔 모델(Gaussian beam model), 스펙트럼 모델(spectral model) 등 거리의존 모델에 대해 benchmark 시험을 수행하였으며, benchmark 시험은 다음과 같은 세 가지 거리의존 해양환경으로 나누어 실시했다 : 1) 해수면과 해저면이 Dirichlet 경계조건인 이상 쐐기 문제(ideal wedge problem), 2) 해수면은 앞서 말한 Dirichlet 경계조건이나 해저면은 전달 손실이 있는 손실 통과 해저면 쐐기 문제(penetrable lossy bottom wedge problem), 3) 해수면은 앞서 말한 Dirichlet 경계조건이고 해저면은 Neumann 경계조건으로 서로 평행이면 음파전달 속도가 거리방향 의존인 경우, 경우 1은 anaytic 모델을 사용하고 경우 2는 정상 모드 모델, 포물선 방정식 모델, 스펙트럼 모델을 사용하였으며, 경우 3에 대해서는 가우시안 빔 모델과 포물선 방정식 모델을 사용하였다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.509-518
• /
• 2003

In this study, we carried out nonlinear analysis according to various interface nonlinear models by interaction magnitude, and analyzed interface behavior such as distribution of tangential traction and relative slip in steel-concrete composite structure. As a result of this study, tangential traction and relative slip of interface is rapidly increased at the steel plate-concrete interface, especially at the neutral region, rather than tensile, as opposed to the T beam-concrete interface. In transverse direction, it has gradually reduced to go outside from loading position. In longitudinal direction, it was minimum at the central region near the loading point, maximum at 0.6-0.7L from support and gradually reduced as it nears support. Moreover, as the load is increased, the failure of interface gradually expands from the maximum tangential traction position to the entire region. It is expected to provide fundamentality for interface behavior and load-carrying mechanism, and for the design of bending and shear connection of steel-concrete composite structure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.263-269
• /
• 2006

An optimization model was developed for groundwater development and management in coastal areas. The optimization model consists of coastal groundwater flow model and optimization techniques. The objective of this work is to validate sharp-interface model which is one of major components of the optimization model. A laboratory experimental model is built to simulate freshwater lens, i.e., layer of freshwater floating on top of saltwater, phenomena. Experimental results for the position of fresh-saltwater sharp-interface and the salinity in well are compared with numerical results. Average ratio of relative error is estimated approximately between 2.91% and 4.39%. And the numerical results are in good agreement with the laboratory results of water quality in well in addition to the position of sharp-interface. Accordingly the evaluation of coastal groundwater flow using sharp-interface model can produce reasonable results.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.671-678
• /
• 2002

High-frequency monostatic reverberation model (HYREV: HanYang Univ. REVerberation model) suitable for shallow-water environment is presented. It is difficult to predict reverberation signals in shallow water due to scattering from sea surface and seafloor. The arrival times and transmission losses from the source to scatterers are obtained from the eigenrays. The composite roughness theory is used to predict the boundary scattering. The signals generated by the HYREV and the GSM were compared with the observed signals and it is showed that the HYREV model provided a closer fit to the observed signals than those obtained using the GSM.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.469-476
• /
• 2023

Soil plasticity models for cyclic and dynamic loads are essential in non-linear numerical analysis of geotechnical structures. While a single yield surface model shows a linear behavior for cyclic loads, J₂-bounding surface plasticity model with zero elastic region can effectively simulate a nonlinearity of the ground response with the same material properties. The radius of the yield surface inside the boundary surface converged to 0 to make the elastic region disappear, and plastic hardening modulus and dilatancy define plastic strain increment. This paper presents the stress-strain incremental equation of the developed model, and derives plastic hardening modulus for the hyperbolic model. The comparative analyses of the triaxial compression test and the shallow foundation under the cyclic load can show stable numerical convergence, consistency with the theoretical solution, and hysteresis behavior. In addition, plastic hardening modulus for the modified hyperbolic function is presented, and a methodology to estimate model variables conforming 1D equivalent linear model is proposed for numerical modeling of the multi-dimensional behavior of the ground.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.451-454
• /
• 2002

HYREV (Hanyang univ. Reverberation model)은 천해에서 적용 가능한 고주파 단상태 잔향음 모델이다. 천해에서 발생하는 잔향음은 외해에 비해 경계면 산란 영향이 크기 때문에 경계면 산란 영향을 정확히 포함한 잔향음 모델 개발이 필요하다. 본 모델에서는 고유음선(eigenray) 계산을 통하여 음원과 산란체까지의 도달시간과 전달손실을 계산 하였으며 경계면 산란 예측은 복합 거칠기(composite roughness) 모델을 이용하였다. 모델의 검증을 위하여 GSM(generic sonar model) 잔향음 모의 신호 및 실측 잔향음 신호와 비교하였으며 비교 결과 GSM 보다 HYREV 모델이 천해 잔향음 예측에 적합함을 확인할 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.499-507
• /
• 2003

As the load is increased on the steel-concrete composite structure, its interface begins to show nonlinear behavior due to the reduction of interaction, micro-crack, slip and separation, and it causes slip-softening, Therefore, it is essential to consider the partial-interaction analysis technique. Until now, however, full-interaction or, in some instances, the linear-elastic model, which are insufficient to simulate accurate behavior, are assumed in the analysis of composite structure since the analysis method and nonlinear model for interface are very difficult and complicated. Therefore, the design of composite structure is followed by the experimental method which is inefficient-because a number of tests have to be carried out according to the design environments. In this study, we carried out the nonlinear analysis according to various interface nonlinear models by interaction magnitude, and analyzed more accurate structural behavior and performance by maximum tangential traction and slip-softening at the interface. As a result of this study. we were able to prove that the nonlinear model of interface more exactly represents behavior after yielding, such as ultimate load: that initial tangential stiffness of interface has a significant effect on the yielding load of structural members or part: and that the maximum tangential traction and slip-softening mainly effects structural yielding and ultimate load. Therefore, the structural performance of composite structure is highly dependent on the steel-concrete interface or interaction, which may result in initial tangential stiffness, maximum tangential traction and slip-softening in nonlinear model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.221-228
• /
• 2010

External bonding of carbon fiber reinforced polymer (CFRP) sheets has been widely accepted as a popular method for strengthening of deteriorated RC structures. The long-term behavior of CFRP-strengthened RC structure is often affected by that of the interface between CFRP sheets and concrete. This study aims at applying a viscoelastic model to describe the creep behaviour of the adhesive layer bonding CFRP sheet to concrete, the CFRP-concrete interface. Reviews of available models on concrete creep behavior have been first carried out and then new FE analysis model is proposed. The proposed FE analysis model based on the maxwell model has been verified by previous experimental results. It is shown that the creep effect of interfacial adhesive layer is very important on the long-term behavior of concrete structures strengthened with CFRP.