• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1023-1030
• /
• 2012

The diversity techniques can benefit underwater acoustic communications when the distance between sensors is sufficiently apart, and this leads to the increases in the physical size of the communication system: thus it is very hard to practically use such systems in real-environments. Therefore, in this paper, we have collected data from real underwater cannel environments in order to analyze the usability of diversity combined with beamforming techniques. And we have estimated the fading characteristics from the measurement data, and analyzed the correlation coefficients using the estimated fading characteristics. After analyzing the estimated fading characteristics from the measurements data, we found out that by applying diversity techniques on the output signals from beamformers that perform beamforming from different multipath directions, we can reduce the distance between sensors and at the same time benefit from the diversity gain.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.774-781
• /
• 2018

In this investigation, a gas gun is proposed driven by carbon dioxide gas and installed on a quadcopter-type small unmanned drone for the purpose of cattle vaccination, and we developed a launcher and its connection unit. The system consists of a commercial drone, a gas gun, a solenoid valve, and the remote communication controller, etc. The velocity of launched projectile is measured, and the full system is finally validated through ground test and flight examination loaded for the real aircraft. The feasibility is checked if this technology is applicable to various disease abatement and hazard mitigation in the fields of agriculture and fire-fighting with the present research and development.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.397-406
• /
• 2003

As the information technology grows interests in the intrusion detection system (IDS), which detects unauthorized usage, misuse by a local user and modification of important data, has been raised. In the field of anomaly-based IDS several artificial intelligence techniques such as hidden Markov model (HMM), artificial neural network, statistical techniques and expert systems are used to model network rackets, system call audit data, etc. However, there are undetectable intrusion types for each measure and modeling method because each intrusion type makes anomalies at individual measure. To overcome this drawback of single-measure anomaly detector, this paper proposes a multiple-measure intrusion detection method. We measure normal behavior by systems calls, resource usage and file access events and build up profiles for normal behavior with hidden Markov model, statistical method and rule-base method, which are integrated with a rule-based approach. Experimental results with real data clearly demonstrate the effectiveness of the proposed method that has significantly low false-positive error rate against various types of intrusion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.66-66
• /
• 2010

$SnO_2$ 나노선은 n-type 반도체 특성을 띄며 트랜지스터, 가스 센서, pH 센서 등 여러 분야에 걸쳐 다양하게 사용되고 있다. $SnO_2$ 나노선은 그 자체만으로 시계방향의 전기적 히스테리시스를 보이며 이것은 나노선 표면에 흡착된 물이나 산소가 발생시키는 전자 갇힘 현상이 가장 큰 원인으로 작용한다. 특히 고분자를 게이트 절연막으로 사용할 경우 게이트 절연막의 전기적 히스테리시스가 소자 특성에 영향을 미치게 되며, 고분자 절연막의 히스테리시스는 $SnO_2$ 나노선의 히스테리시스와 반대인 반시계 방향의 특성을 보인다. 고분자 내에서 발생하는 히스테리시스는 고분자 사이에 흡착된 물 분자나 고분자의 높은 극성을 가지는 작용기 등이 원인으로 작용한다. 전기적 히스테리시스는 FET소자를 구동하는데 있어 부적절한 특성으로, 이것의 원인을 이해하는 것은 중요하며 히스테리시스의 방향과 크기를 조절할 수 있는 기술 또한 중요하다. 본 연구에서는 폴리이미드(PMDA-ODA)를 게이트 절연막으로 사용하여 플렉시블 기판을 만들고 그 위에 $SnO_2$ 나노선을 슬라이딩 전이 방식으로 정렬하여 플렉시블 FET를 제작하였다. 제작된 소자는 $0.7cm\;{\times}\;0.7cm$ 넓이 안에 300개의 FET가 존재하며 SEM 이미지를 통해 넓이 $50{\mu}m$, 길이 $5{\mu}m$의 FET채널에 약 150개의 나노선이 연결되어 있는 것을 확인했다. 이 소자의 히스테리시스는 폴리이미드의 교차결합 정도에 따라, 그리고 폴리이미드 절연막을 제작할 때의 습도에 따라 변하게 된다. 교차결합이 많아지고 습도가 낮아질수록 폴리이미드 절연막 내부에 흡착되는 물분자가 줄어들게 되고 절연막의 히스테리시스가 사라지며 시계방향의 나노선 히스테리시스가 지배적이 된다. 반대로 교차결합이 줄어들고 습도가 높아질수록 폴리이미드 절연막 내부에 물분자가 늘어 나면서 시계반대방향의 폴리이미드 히스테리시스가 FET의 전기적 특성에서 눈에 띄게 나타난다. 이 실험을 통해 고분자 절연막을 사용한 $SnO_2$ 나노선 FET의 전기적 히스테리시스를 조절할 수 있었으며, 소자의 히스테리시스를 없앨 수 있는 가능성에 대해서 논하고자 한다.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.607-612
• /
• 2021

Silicon (Si) is one of the promising active materials to replace the widely used graphite because of its low electrochemical potential and high theoretical capacity. However, Si anodes still face in problems with the huge volume expansion and continuous decomposition of the electrolyte during repeated charge and discharge processes. To address these issues, a cross-linkable waterborne polyurethane (CWPU) based on a bio-oil, castor oil, was prepared and reacted with Tris(2,3-epoxypropyl) isocyanurate (TGIC) linkers, resulting in the formation of a mechanically robust 3D network structure. Si anodes fabricated with the CWPU-TGIC exhibited stable cycling performances and excellent discharge capacities. The results revealed that the CWPU-TGIC binder efficiently accommodates the large volume change for Si anode during charge and discharge cycles. Overall, the eco-friendly binder shows great promise in improving the electrochemical performances of Si anodes.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.180-189
• /
• 2021

N-Heteroaryl carbazoles were synthesized with thermal heating in the presence of Cu(I) catalyst and used as main ligands for the preparation of heteroleptic Ir(III) complexes. In these Ir(III) complexes, 6-membered ring structures of Ir-ligand chelation were found by single crystal X-ray diffraction. The blue shift of photoluminescence for Ir(III) complexes was observed in the case of the strong bond formation between Ir and ancillary ligands. It also has been clearly shown that the higher electron density of heteroaryl aromatic ring influenced shorter maximum photoluminescence wavelength (λmax) of Ir(III) complexes. Since the new Ir(III) complexes showed good phosphorescent emission, they could be potentially used as OLED materials in the emission Layer.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.825-832
• /
• 2021

In this study, by selecting specific aptamers that selectively detection on P. gingivalis, the main cause of periodontal disease, and purifying and identifying protein molecules that bind to the selected aptamers, the mechanism of action of P. gingivalis was investigated. A DNA library having 39 random sequences was prepared, and aptamers with specificity for P. gingivalis were selected using the SELEX method, and the nucleotide sequence was analyzed by cloning using PCR2.1 cloning vector. 8 of aptamers with different nucleotide sequences were selected, and modified weston blot was performed using APG-3 among the selected aptamers to identify 11 proteins that act directly, and proteins were analyzed. As a result, a protein that selectively binds to P. gingivalis was isolated and identified. Therefore, aptamer selectively binds and attaches to proteins related to inhibition of sugar metabolism and cell activity of P. gingivalis, suggesting the possibility of a sensor for diagnosis of periodontal disease.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.10-14
• /
• 2021

mCherry is one of the well-understood red fluorescent proteins which has a similar tertiary structure as GFPs, but pH resistant due to the lack of hydrogen bond network. Whereas mCherry-I202T showed far-red fluorescence and also pH sensitive property because of the additional hydrogen bond formed by substituting Ile of 202 amino acid sequence on mCherry with Thr. In order to verify the pH sensitive characteristic of mCherry-I202T owing to the extension of hydrogen bond, UV-vis spectrum was measured over the range of acidic to basic pH. We also demonstrate further possibilities of applying mCherry-I202T as a pH sensor.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.481-488
• /
• 2006

This paper suggests a novel approach of integrating the quasi-distributed watershed model SWAT with the fully-distributed groundwater model MODFLOW. Since the SWAT model has semi distributed features, its groundwater components hardly considers distributed parameters such as hydraulic conductivity and storage coefficient. Generating a detailed representation of groundwater recharge, head distribution and pumping rate is equally difficult. To solve these problems, the method of exchanging the characteristics of the hydrologic response units (HRUs) in SWAT with cells in MODFLOW by fully combined manner is proposed. The linkage is completed by considering the interaction between the stream network and the aquifer to reflect boundary flow. This approach is provisionally applied to Gyungancheon basin in Korea. The application demonstrates a combined model which enables an interaction between saturated zones and channel reaches. This interaction plays an essential role in the runoff generation in the Gyungancheon basin. The comprehensive results show a wide applicability of the model which represents the temporal-spatial groundwater head distribution and recharge.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.3
• /
• pp.81-87
• /
• 2024

Nanomaterial electrodes are used to improve the analytical performances of electrochemical measurements in biological and chemical field. Frequently used methods for fabricating metal nanostructures are solution processing and electrodeposition. In the solution process, it is possible to control the characteristics (e.g., direction) of metal growth by using capping agents, thereby fabricating nanoparticles of specific structures. In the electrodeposition, the electrode surface and the deposited metal atoms are in direct contact. Each process has its own limitation as well, and many studies are conducted to overcome such limitation. In this paper, we report an integration of the two fabrication methods and the characteristics, such as structural and electrochemical properties, of the fabricated electrodes. Lastly, we discuss the possibility of using the fabricated nanostructured electrode as a sensor.