• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.411-416
• /
• 2010

In this research, we intended to improve the tolerance of thick film resistor using photosensitive polymer resistor paste which was fabricated with alkali-solution developable photosensitive resin and conductive carbon black. At first, we investigated the effect of the selection of carbon black and photosensitive resin on the resistance range and tolerance level of polymer thick film resistor (PTFR). And then, a difference in resistance tolerance was evaluated according to the coating methods of photosensitive resistor paste on test board. In case that the photosensitive resistor paste was coated on whole surface of test board using screen printing, large positional tolerance was obtained because the formation of the thick film with uniform thickness was difficult. On the other hand, when the paste was coated with roller, the resistive thick film with uniform thickness was formed on the whole board area and the result of resistance evaluation showed low tolerance in ${\pm}10%$ range. The tolerance of PTFR could be improved by combination of the precise patterning using photo-process and the coating process for the resistive thick film with uniform thickness.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.111-115
• /
• 2015

Two new analogs of bestatin were prepared from $\small{D}$-leucine and $\small{D}$-valine in a stereoselective and efficient way. An aminopeptidase inhibitor bestatin shows significant biological effects on immunomodulation and is marketed for the treatment of acute myelocytic leukemia. The key intermediates, trans-oxazolidine methyl esters 2a and 2b, were obtained with more than 20 to 1 stereoselectivity in a one-pot procedure by the three cascade reactions between N-hydroxymethyl protected ${\alpha}$-amino aldehydes (4a and 4b) and phenylsulfonylnitromethane ($PhSO_2CH_2NO_2$) and the following in-situ ozonolysis. Basic hydrolysis of 2a and 2b, and then the peptide coupling with $\small{L}$-Leu-OMe produced the protected derivatives of two new bestatin analogs, 3a and 3b, respectively. The new isobutyl and isopropyl analogs of bestatin (1a and 1b) were produced in overall 51% and 38% yields, respectively, with high stereoselectivity from the corresponding protected ${\alpha}$-amino aldehydes 4 in a six-step process.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.215-223
• /
• 1997

The advantages of service in satellite links are representatively a long distance and large capacity transfer and simultaneous communication. And terrestrial links are of high speed and high quality data transfer Therefore a combined form of characteristics of satellite and terrestrial links is desirable to furnish a good quality service to subscribers. And in satellite links an analysis method and a simulation method of file transfer are conducted to evaluate the efficiency of file transfer. The parameters are used the message length and transmission time, and the number of chain record and transmission time. From the results of evaluation, in satellite links, it is found that when the message length is shorter than 512 bytes, the file transmission time becomes extremely long and when the message length is set at 1024 bytes, the file transmission time abruptly increase from 2048 bytes. Also it is confirmed that when the number of chain record is under 15, the file transmission time becomes extremely long and if the number increase up to 90,the time becomes gradually short and over 90,it becomes constant.Therefore,from the result of file transmission in th case of utilizing satelite links,it is confirmed that the optimum message length in the minmum transmission time is present closely at 1024 bytes.Also it is confirmed that when the satelite transmission sped becoms smaller from 24kbps to2400bps,the optimum message length also becomes smaller from 640 bytes to 256bytes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.72-77
• /
• 2017

Lighting systems in modern society has been developed using a combination of IT technology and LED lighting for the purpose of bringing about changes in human-centered natural lighting and to take advantage of the efficient management and energy saving of LED lighting. In this paper, we propose an LED lighting control system that can control the color temperature and brightness of LED lighting composed of 3000K Warm LEDs and 6000K Cool LEDs by using an Arduino Due and wireless communication technology such as Bluetooth and Zigbee. The Arduino Due allows the color temperature of the lighting to be adjusted in several steps by controlling the duty rate and enables many lights to be controlled using Zigbee communication capable of 1: N multiple communication. By using Bluetooth communication, it is possible to easily control the LED lighting by means of a smartphone application, thereby enhancing the convenience for the user. The wireless communication based LED lighting control system implemented in this study cannot only provide human-centered lighting through its color temperature control from 3067K to 5960K and illumination control, but can also reduce the power consumption and be used as a natural-friendly lighting system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.485-495
• /
• 2000

The parallel computer system that uses parallel program on the application such as a large scale business or complex operation is required. One of crucial operation of parallel computer system is synchronization. A representative method of synchronization is barrier synchronization. A barrier forces all process to wait until all the process reach the barrier and then releases all of the processes. There are software schemes, hardware scheme, or combinations of these mechanism to achieve barrier synchronization which tends to use hardware scheme. Besides, barrier synchronization lets parallel computer system fast because it has fewer start-up overhead. In this paper, we propose a new switch module that can implement fast and fault-tolerant barrier synchronization in hardware scheme. A proposed barrier synchronization is operated not in full-switch-driven method but in processor-driven method. An effective barrier synchronization is executed with inexpensive hardware supports. Therefore, a new proposed hardware barrier synchronization is designed that it is operated in arbitrary network topology. In this paper, we only show comparison of barrier synchronization on Multistage Interconnection Network. This research results in 24.6-24.8% reduced average delay. Through this result, we can expect lower average delay in irregular network.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.649-655
• /
• 2015

As a novel water treatment membrane, concept of ceramic-based graphene membrane (CbGM) was suggested, and its mass transport behavior was investigated. The selectivity of CbGM was given by graphene material which is consisting of active layer, only transmitting water, but rejecting salts. Filtration-assisted assembly methods was employed as a facile method to fabricate CbGM. Surface morphology and characteristics of CbGM were analyzed by scanning electron microscopy (SEM) and contact angle. In addition, three different kinds of solutes (i.e., NaCl, $MgCl_2$, $Na_2SO_4$) were tested in batch forward osmosis system to confirm the mass transport behavior. Through surface morphology analysis and mass transport behavior, it was revealed that interlocking between graphene layers is very important, rather than thickness of laminated graphene layers, in terms of selectivity to CbGM. All the anions in each solute showed faster transport than those of cations. In addition, solutes which have high ion valence charge ratio of anion to cation ($Z^-/Z^+$) was easier to be passed through CbGM. It indirectly implied that the surface charge of CbGM appear to be positive. In addition, It showed that surface charge of CbGM has a great role on mass transport, in particular, transport of matter having charges, generally ions.

• Korean Security Journal
• /
• no.62
• /
• pp.185-203
• /
• 2020

While overall crime has been on the decline since 2009, voice phishing has rather been on the rise. The government and academia have presented various measures and conducted research to eradicate it, but it is not enough to catch up with evolving voice phishing. In the study, researchers focused on catching criminals and preventing damage from voice phishing, which is difficult to recover from. In particular, a voice phishing prediction method using the Fraud Detection System (FDS), which is being used to detect financial fraud, was studied based on the fact that the victim engaged in financial transaction activities (such as account transfers). As a result, it was conceptually derived to combine big data such as call details, messenger details, abnormal accounts, voice phishing type and 112 report related to voice phishing in machine learning-based Fraud Detection System(FDS). In this study, the research focused mainly on government measures and literature research on the use of big data. However, limitations in data collection and security concerns in FDS have not provided a specific model. However, it is meaningful that the concept of voice phishing responses that converge FDS with the types of data needed for machine learning was presented for the first time in the absence of prior research. Based on this research, it is hoped that 'Voice Phishing Damage Prediction System' will be developed to prevent damage from voice phishing.

• Journal of the Korean Vacuum Society
• /
• v.11 no.1
• /
• pp.50-58
• /
• 2002

The growth of GaN films on Si substrate has many advantages in that Si is less expensive than sapphire substrate and that integration of GaN-based devices with Si substrate is easier The difference of lattice constant and thermal expansion coefficient between GaN and Si is larger than those between GaN and sapphire. However, which results in many defects into the grown GaN. In order to obtain high duality GaN films on Si substrate, we need to reduce defects using the buffer layer such as AlN. In this study, we prepared three types of AlN buffer layer with various crystallinity on Si (111) substrate using MOCVD, Sputtering and MOMBE methods. GaN was grown by MOCVD on three types of AlN/Si substrate. Using TEM and XRD, we carried out comparative investigation of growth and properties of GaN deposited on the various AlN buffers by characterizing lattice coherency, crystallinity, growth orientation and defects formed (voids, stacking faults, dislocations, etc). It is found that the crystallinity of AlN buffer layer has strong effects on growth of GaN. The AlN buffer layers grown by MOCVD and MOMBE showed the reduction of out-of-plane misorientation of GaN at the initial growth stage.

• The Journal of Society for e-Business Studies
• /
• v.11 no.4
• /
• pp.1-20
• /
• 2006

Many government offices have been proceeding a development of Enterprise Architecture(EA) according to apply Government-wide Enterprise Architecture'. Each office and working-level officials have had a hard time because of no guides related to a EA development method such as the Framework, Standards, Principle, Reference Model, Etc. This paper propose a method for developing e-Government Enterprise Architecture considered a characteristic of public institutes through analyzing existing cases. The method for development e-Government EA includes the EA Performance Management Model to monitor objectively each office's long-term business promotion because the e-Government EA development is a job of long duration and cooperation with many institutes. This method also combines the EA Change Management Activities for the officials to improve general knowledge about EA's idea and EA's value, etc. We show the EA case study of the Ministry of Government Administration and Home Affairs to demonstrate feasibility of our approach. As a result, public offices will carry out their BPR(Business Process Re-engineering) and ISP(Information Strategy Planning) more efficiently based on this EA development method.

• International Commerce and Information Review
• /
• v.18 no.2
• /
• pp.151-167
• /
• 2016

This study is focus on the relationship between the role of FTA and service trade performance enhancing strategy in Korea. and It is on the verification of the focus to the competitive promoting strategy of the logistics industry. finally proposition of the policy making to the government is proposed in the research. The invigoration of the service trade through FTA focus on the logistics industry is very combinative economy policy target with the side of government and the side of private enterprises both. added to this, this is the goal of impossible to achieve just with the development of logistics industry itself. it needs to construct the organic relationship, that is the implement and enforcement of the SCM through logistics industry network. Thus, on logistics, the 3rd party operating system implementation is top priority to gain international competitiveness. furthermore, the 4th party facilitation including consulting function and IT technology to pursue the maximum effectiveness logistics service providing.