• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.107-119
• /
• 2016

Currently, 230 domestic tourist destinations have been designated, established, and operated in accordance with the Tourism Promotion Act. According to the results of preceding research, more than 30% of them have been getting into the stagnation or decline stage. This is becoming a burden to local governments operating and managing tourist destinations, making it necessary to seek resolution measures. Thus, this study determined the activation elements of stagnant/declined tourist destinations regeneration to deal with problems of domestic stagnant or declined tourist destinations and also to regenerate rational and sustainable tourist destinations. This study conducted a survey with experts based on causes for stagnation and decline of domestic tourist destinations suggested by preceding research. Based on the survey results, the activation elements of stagnant/declined tourist destinations regeneration were drawn through the Delphi Technique and Analytic Hierarchy Process. And then the priority and weight of the drawn activation elements of stagnant/declined tourist destinations regeneration were drawn for the sake of reasonable project progress of tour site regeneration. In the results of the analysis, as activation elements of stagnant/declined tourist destinations regeneration, a total of seven upper-attributes, 23 sub-attributes, and 66 detailed-elements were drawn. It would be possible to raise the efficiency of projects and rational decision-making when executing future tourist destinations regeneration projects by using the activation elements drawn. Also, the drawn elements could be applied to the actual tourist destinations regeneration projects as measures for the stagnant/declined domestic tourist destinations' contribution to the vitalization of local economy based on sustainability, prohibition of thoughtless development of domestic tourism projects, and also efficient use of tourism resources.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.2 s.9
• /
• pp.99-110
• /
• 2003

In this study, lightening material weight and normalizing structure of preventing system of landslide soil-rock in trench excavation was tried with focusing in safety construction availability and workability. In other words, risk estimate, safety management method investigation, applicability of bracing material and mechanical stability of bracing structure was studied. From these result, structural stability and structural analysis of light weight bracing structure was carried out with common structural analysis program, for examining movement mechanism of bracing structure and normalization of standard. The result are summarized as following. (1) Mechanical ability of bracing members and soil pressure parameter acting to member for ensuring mechanical propriety of bracing structural and useful of new material considering soil mechanics boundary were proposed. Also theory and method of analysis of bracing structural were proposed. (2) As a result of the structure analysis of geographical profile for light pannel used FRP as hard clay mechanical characteristics(bending moment, shear force, axial force) of panel were changed according to groundwater level and it is proved that the result of mechanical analysis is within allowable stress. Thus, light pannel is available for bracing structure in trench excavation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.141-147
• /
• 2012

The purpose of the study is the acquisitions of knowledge related in job searching from local companies and job seekers using data mining techniques. At the first step, for the study, we had selected the local companies their headquarters are located in Jeonbuk province. Then we had picked the graduating students out from the high schools, colleges, and universities in the same area as the job seekers. After the targeting of the sample, we had surveyed 560 local companies and 14 schools for the collecting of the preliminary data. As the result of the survey, we could collect 173 responses from the companies and 551 responses from the job seekers. At the second step using data mining, we had adapted the C5.0 algorithm to extract the inference rules. Then we had used the Visual Basic (VB) programming language to visualize the rules at the third step. At the fourth step, we transformed the inference rules into DB tables. At the final step, we had executed the rule inferences to support the development of the long-term human resources development (HRD) strategies. As the result of the study, we could suggest the helpful information to the HRD directors and job seekers in designing their strategies in managing their jobs and career development.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.163-173
• /
• 2020

In this study, on-site corporate instructors participated as student-cum-workers in a degree-linked high skills Meister course to improve job competency and practical ability as proposed in the Work-Study Career Vision. Evaluation questions were then developed and their validity was verified by assessing satisfaction related to expected goals in enhancing advanced training guidance and competency as an evaluator. Satisfaction assessment was conducted based on training preparation, training implementation, training effectiveness and training administration. The Delphi Method was adopted and a total of 48 items were developed in 6 categories under 4 main areas. There were 7 evaluation items on the satisfaction of training course development under training preparation, 21 evaluation items related to the satisfaction of Off-JT and OJT courses under training implementation, 16 evaluation items related to the satisfaction of increased competency as an on-site corporate instructor and the satisfaction of enhanced practical skills and skills application at work under training effectiveness, as well as 6 evaluation items to assess satisfaction with administrative support under training administration. The final conformity assessment was conducted based on the stability, content validity ratio, consensus and convergence indicators of the developed items. Results of this study do not only apply to quality management of the high skills Meister course which is being promoted as a pilot project for work-study programs, but also serves as a rationale that may be considered as a basic research tool in the collection of various opinions to derive overall system improvement factors for the work-study high skills Meister course.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.997-1007
• /
• 2018

Drought monitoring is the important system for disasters by climate change. To perform this, it is necessary to measure the precipitation based on satellite rainfall estimation. The data developed in this study provides two kinds of satellite data (raw satellite data and bias-corrected satellite data). The spatial resolution of satellite data is 10 km and the temporal resolution is 1 day. South Korea was selected as the target area, and the original satellite data was constructed, and the bias-correction method was validated. The raw satellite data was constructed using TRMM TMPA and GPM IMERG products. The GRA-IDW was selected for bias-correction method. The correlation coefficient of 0.775 between 1998 and 2017 is relatively high, and TRMM TMPA and GPM IMERG 10 km daily rainfall correlation coefficients are 0.776 and 0.753, respectively. The BIAS values were found to overestimate the raw satellite data over observed data. By using the technique developed in this study, it is possible to provide reliable drought monitoring to Korean peninsula watershed. It is also a basic data for overseas projects including the un-gaged regions. It is expected that reliable gridded data for end users of drought management.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.71-77
• /
• 2011

Recently, non-destructive stress measurement method using magnetic anisotropy sensor has been applied to the construction site such as steel bridges and steel pipes. In addition, steel rib used in the tunnel construction site was found to be possible to measure the stress by non-destructive method. In this study, steel loading experiments using magnetic anisotropy sensor developed in Japan and strain gauges were conducted to derive stress sensitivity curve for domestic steel SS400. Also, additional steel loading experiments and numerical analysis were performed for evaluation of applicability for non-destructive stress measurement method using magnetic anisotropy sensor. As a result of this study, stress sensitivity curves for domestic steel SS400 were derived using output voltage measured by magnetic anisotropy sensor and average of stress measured by strain gauges depending on the measurement location. And as a result of comparing additional steel loading experiments with the numerical analysis, error level of magnetic anisotropy sensor is around 20MPa. When considering the level of the yield stress(245MPa) of steel, in case of using magnetic anisotropy sensor in order to determine the stress status of steel, it has sufficient accuracy in engineering. Especially, magnetic anisotropy sensor can easily identify the current state of stress which considers residual stress at steel structure that stress measurement sensor is not installed, so we found that magnetic anisotropy sensor can be applied at maintenance of steel structure conveniently.

• The Korean Journal of Applied Statistics
• /
• v.33 no.6
• /
• pp.777-789
• /
• 2020

COVID-19 has been rapidly spread world wide since late December 2019. In this paper, our interest is to estimate distribution of incubation time defined as period between infection of virus and the onset. Due to the limit of accessibility and asymptomatic feature of COVID-19 virus, the exact infection and onset time are not always observable. For estimation of incubation time, interval censoring technique is implemented. Furthermore, a competing risk model is applied to estimate the case fatality and cure fraction. Based on the result, the mean incubation time is about 5.4 days and the fatality rate is higher for older and male patient and the cure rate is higher at younger,female and asymptomatic patient.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.1-11
• /
• 2021

Detection of surface water features including river, wetland, reservoir from the satellite imagery can be utilized for sustainable management and survey of water resources. This research compared the water indices derived from the multispectral bands and the machine learning technique for detecting the surface water features from he Landsat-8 satellite image acquired in Daegu through the following steps. First, the NDWI(Normalized Difference Water Index) image and the MNDWI(Modified Normalized Difference Water Index) image were separately generated using the multispectral bands of the given Landsat-8 satellite image, and the two binary images were generated from these NDWI and MNDWI images, respectively. Then SVM(Support Vector Machine), the widely used machine learning techniques, were employed to generate the land cover image and the binary image was also generated from the generated land cover image. Finally the error matrices were used for measuring the accuracy of the three binary images for detecting the surface water features. The statistical results showed that the binary image generated from the MNDWI image(84%) had the relatively low accuracy than the binary image generated from the NDWI image(94%) and generated by SVM(96%). And some misclassification errors occurred in all three binary images where the land features were misclassified as the surface water features because of the shadow effects.

• Journal of Korean Society of Forest Science
• /
• v.110 no.1
• /
• pp.64-71
• /
• 2021

Recently, climate change has gradually accelerated the occurrence of landslides. Among the various effects caused by landslides,debris flow is recognized as particularly threatening because of its high speed and propagating distance. In this study, the impacts of various factors were analyzed using quantification theory(I) for the prediction of debris flow hazard soil volume in Seoraksan National Park, Korea. According to the range using the stepwise regression analysis, the order of impact factors was as follows: vertical slope (0.9676), cross slope (0.6876), altitude (0.2356), slope gradient (0.1590), and aspect (0.1364). The extent of the normalized score using the five-factor categories was 0 to 2.1864, with the median score being 1.0932. The prediction criteria for debris flow occurrence based on the normalized score were divided into four grades: class I, >1.6399; class II, 1.0932-1.6398; class III, 0.5466-1.0931; and class IV, <0.5465. Predictions of debris flow occurrence appeared to be relatively accurate (86.3%) for classes I and II. Therefore, the prediction criteria for debris flow will be useful for judging the dangerousness of slopes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.5
• /
• pp.147-156
• /
• 2022

Industrial control systems that manage and maintain various industries were mainly operated in closed environment without external connection, but with the recent development of the Internet and the introduction of ICT technology, the access to the industrial control system of external or attackers has become easier. Such incorrect approaches or attacks can undermine the availability, a major attribute of the industrial control system, and violation of availability can cause great damage. In this paper, when issuing commands in an industrial control system, a verification group is formed using a random list to verify and execute commands, and a trust score technique is introduced that applies feedback to the verification group that conducted verification using the command execution result. This technique can reduce overhead generated by random generation in the process of requesting command verification, give flexibility to the verification process, and ensure system availability. For the performance analysis of the system, we measured the time and gas usage when deploying a smart contract, gas usage when verifying a command. As a result, we confirmed that although the proposed system generates a random list compared to the legacy system, there was little difference in the time when it took to deploy smart contract and that the gas used to deploy smart contract increased by about 1.4 times in the process of generating a random list. However, the proposed system does not perform random operations even though the operation of command verification and confidence score technique is performed together during the command verification process, thus it uses about 9% less gas per verification, which ensures availability in the verification process.