• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.132-139
• /
• 2002

The grain size of aluminum alloy was refined to the submicrometer level by using equal-channel angular pressing(ECAP). The effect of grain size refinement was evaluated by the tensile test, micro-hardness test, microstructure observations, ultrasonic test and acoustic emission test. The strength and the Vickers hardness were increased significantly according to grain size refinement after equal-channel angular pressed. The ultrasonic velocity was faster after equal-channel angular pressed, and the high frequency range appeared. The results of the ultrasonic velocity and the frequency range are expected to be basic data that can prove the grain size refinement

• Agrochemical news magazine
• /
• v.20 no.6 s.153
• /
• pp.28-32
• /
• 1999

• The Korean Journal of Applied Statistics
• /
• v.12 no.2
• /
• pp.621-631
• /
• 1999

재료의 피로 파괴과정은 균열의 발생과 전파 및 성장의 과정을 거쳐 마침내 결정적 균열의 크기가 일정한도를 넘어서면 재료의 파괴가 일어난다. 이 때까지의 시간, 즉 피로 수명이 역정규분포를 따를 때 재료의 수명과 스트레스 수준과 관계를 나타 내는 S-N곡선에 대한 대수선형모형(log-linear model)을 제시하고, 이 모형하에서 피로수명시험에 대한 통계적 최적시험설계방법을 찾는다. 통계적 최적여부에 대한 판단기준으로 설계 스트레스 수준하의 특정 시점에서의 신뢰도에 대한 최우추정량의 점근분산을 최소화하는 방법을 사용하였다.

• Communications for Statistical Applications and Methods
• /
• v.15 no.3
• /
• pp.353-365
• /
• 2008

The sample size in a clinical trial is determined by the hypothesis, the variance of observations, the effect size, the power and the significance level. Dropouts in clinical trials are inevitable, so we need to consider dropouts on the determination of sample size. It is common that some proportion corresponding to the expected dropout rate would be added to the sample size calculated from a mathematical equation. This paper proposes new equations for calculating sample size dealing with dropouts. Since we observe data longitudinally in most clinical trials, we can use a last observation to impute for missing one in the intention to treat (ITT) trials, and this technique is called last observation carried forward(LOCF). But LOCF might make deviations on the assumed variance and effect size, so that we could not guarantee the power of test with the sample size obtained from the existing equation. This study suggests the formulas for sample size involving information about dropouts and shows the properties of the proposed method in testing equality of means.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.59-64
• /
• 2005

In studying unsaturated soil mechanics, determination of soil water characteristic curve and permeability equation though not easy, is an essential factor. In this research a new testing apparatus was developed to determine soil water characteristic curve and permeability equation. A test to get saturated permeability coefficients and soil water characteristic curves for two soils was performed by using the developed testing apparatus. First, a saturated permeability test was performed and then the test to get soil water characteristic curve of a drying process was performed. Next, the test to get soil water characteristic curve of a wetting process was performed. Test results showed hysteresis phenomena between soil water characteristic curve of a drying process and soil water characteristic curve of a wetting process. The permeability equations were determined by a theoretical method where a saturated permeability coefficient and a soil water characteristic curve were used.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.59-63
• /
• 2001

The total number of elastic constants of an anisotropic body is 9 and thus it is very difficult to measure these constants experimentally. The number of elastic constants can be reduced if a rock or rock mass is regarded as isotropic or transversely isotropic material. Since only 4 stress-strain relationships can be obtained, it is theoretically impossible to determine all 5 constants from a single uniaxial compression teat. Lekhnitskii overcame this problem by suggesting the fifth equation based on laboratory tests. But his equation is theoretically wrong and does not agree with experimental results. This paper describes the stress-strain relationships and the independent/dependent elastic constants of an anisotropic mass and suggests a testing mothed to determine 5 independent elastic constants for a transversely isotropic rock.

• Tunnel and Underground Space
• /
• v.8 no.3
• /
• pp.249-256
• /
• 1998

Pocheon, Keochang and Sangju granite samples of different granularity and mineralogical composition were thermally treated at pre-determined temperature of $600^{\circ}C$. Thermally-induced microcracks were characterized using an optical microscopy and their effects on the deformation behavior of thermally cycled samples were studied performing compressive mechanical tests. Optical observations shows that by $600^{\circ}C$ nearlly all crystal boundaries open and the new intracrystalline cracks form in the more grains. The intracrystalline cracks are most pronounced at thermally treated Pocheon and Keochang granite samples. Results from mechanical tests represents negative lateral strains, which give negative Poisson's ratios. It is the most probable that negative lateral strains are produced by residual stresses induced during cooling.

• Journal of Internet Computing and Services
• /
• v.13 no.1
• /
• pp.45-55
• /
• 2012

Electronic data management is getting important to reduce overall cost and run-time of clinical data management with the enhancement of data quality. It also critically needs to meet regulated guidelines for the overall quality and safety of electronic clinical trials. The purpose of this paper is to develop the performance evaluation framework in electronic clinical data management. Four key metrics in the area of infrastructure, intellectual preparation, study implementation and study completion covering major aspects of clinical trial processes are proposed. The performance measures evaluate the extent of regulation compliance, data quality, cost and efficiency of electronic data management process. They also provide measurement indicators for each evaluation items. Based on the key metrics, the performance evaluation framework is developed in three major areas involved in clinical data management - clinical site, monitoring and data coordinating center. As of the initial attempt how to evaluate the extent of electronic data management in clinical trials by Delphi survey, further empirical studies are planned and recommended.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1415-1421
• /
• 2016

There are considerable concern on the methods for the efficient utilization of the test-resources as increasing of the number of the tests for functionality and performance verification of weapon systems. Furthermore, with an increase in the complexity of the resource assignment the decision support is required. Test resource allocation is basically the same problems as conventional NP-hard FJSP(Flexible Job Shop Problem), therefore empirical test resource allocation method that has been used in many decades is limited in the time performance. Although research has been conducted applying the genetic algorithm to the FJSP, it is limited in the test resource allocation domain in which more than one machine is necessary for a single operation. In this paper, a variable group genetic algorithm is proposed. The algorithm is expected to improve the test plan efficiency by automating and optimizing the existing manual based allocation. The simulation result shows that the algorithm could be applicable to the test plan.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.835-842
• /
• 2001

We propose a software-reliability growth model incoporating the amount of testing effort expended during the software testing phase. The time-dependent behavior of testing effort expenditures is described by a Weibull curve. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, we discuss the relations between testing time and reliability and between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through studying the cost for each condition. Also, the release time is determined depending on the conditions of the specified reliability. The optimum release time is determined by simultaneously studying optimum release time issue that determines both the cost related time and the specified reliability related time.