• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.519-522
• /
• 2007

China infrastructure construction market has huge potential for increased use of PPP/BOT mode and one of the most attractive markets of doing business. However, there are still a multitude of challenges for overseas EPC contractor to enter into the China PPP/BOT market both internally and externally. Especially, the construction legal system and relevant policies are considered at present the biggest barriers in accessing China construction market. Therefore, the main purpose of the paper is to identify the impact of the construction laws, regulations and BOT-related policies on the viability of foreign contractor-led BOT project in China. To the satisfaction of the purpose, this paper will first analyze China construction laws based on the key issues that must be tackled by foreign EPC contractor before they enter into China. This summary gives the possible contract scheme for a BOT project of interest in which foreign contractors could define the scope of works and measure the viability of the project. Finally, a case study of wastewater treatment plant BOT project in China subsequently illustrates some of the lessons learned from the foreign contractor's perspectives for successfully participating in future environmental market in China.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.1
• /
• pp.1-27
• /
• 2014

This paper aims at exploring the multi-scalar processes through which the Gumi Industrial Complex was developed in the late 1960s and the early 1970s. Existing studies, influenced by the "Developmental State Thesis", tend to see the industrialization processes of South Korea either by focusing on the socio-politico-economic processes at the national scale or in terms of the plan rationality of the national bureaucrats. This paper, however, denies this perspective on the basis of the strategic relational approach to the state and the multi-scalar perspective. In particular, it argues that the state actions for national industrialization have been the outcome of complex interactions, conflicts and negotiations among social forces, acting in and through the state, and at diverse geographical scales. This paper attempts to empirically prove this argument on the basis of a case study on the construction processes of Gumi Industrial Complex. The development of Gumi Industrial Complex cannot be solely explained in terms of either the plan rationality of the national bureaucrats or the political motivation related to the fact that Gumi was the hometown of President Park Jung-Hee. This paper argues that the development of Gumi Industrial Complex was heavily influenced by the role of the following actors; place-dependent local actors in Gumi and the multi-scalar agents, such as the Korean-Japanese businessmen and the national parliament members elected in the Gumi electoral district.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.147-156
• /
• 2008

In an uniaxial compressive test of a concrete standard specimen (150$\times$300 mm) the crack initiation and extension with the stress increase are the major reason of the failure, which is similar to the breakage of the particle bonding in the simulation by using particle bonded model, especially particle flow code in 3 dimensions (PFC3D) developed by Itasca Consulting Group Inc. That is the main motive to study the possibility of an uniaxial compressive strength test simulation. It is important to investigate the relationship between the micro-parameters and the macro-properties because the 3-dimensional particle bonded model uses the spherical particles to analyze the physical phenomena. Contact bonded model used herein has eight micro-parameters and there are five macro-properties; Young's modulus, Poisson's ratio, uniaxial compressive strength and the crack initiation stress and the ratio concerning the crack propagation with the stress. To simulate the compressive test we made quantitative relationships between the micro-parameters and the macro-properties by using the fractional factorial design and various sensitivity analyses including regression analysis, which result in the good agreement with the previous studies. Also, the stress-stain curve and the crack distribution over the specimen given by PFC3D showed the mechanical behavior of the concrete standard specimen under the uniaxial compression. It is concluded that the particle bonded model can be a good tool for the analyzing the mechanical behavior of concrete under the uniaxial compressive load.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.362-367
• /
• 1999

본 연구에서는 정신분열증 환자들이 정서상태를 개념화하고 얼굴표정을 통하여 타인의 정서 상태를 판단하는 과정을 정상인과 비교하였다. 연구1에서는 만 19세-46세의 정신분열병 환자 19명에게 정서 관련 형용사 15개로 구성된 105개의 형용사 쌍에 대하여 유사성을 평정하도록 하여 MDS로 분석한 결과, 쾌/불쾌와 각성의 두 차원이 일관되게 보고되고 있는 정상집단과는 달리 정신분열병 집단의 자료에서는 쾌/불쾌 차원만이 뚜렷하게 나타나고 각성 차원은 얻어지지 않았다. 연구 2에서는 다양한 정서를 표현한 얼굴 사진 28개를 정신분열병 환자 30명과 대학생 31명에게 제시하고 각 사진의 인물이 경험하고 있는 내적 상태를 쾌/불쾌와 각성의 두 차원에 대하여 각각 7점 척도로 평정하도록 한 결과 정신분열병 집단은 대학생 집단에 비하여 쾌/불쾌 차원에서는 보다 긍정적으로 평정하는 경향이, 각성 차원에서는 상대적으로 낮게 평가하는 경향을 나타냈다. 특히 부정적이고 각성 수준이 높은 내적 상태를 표현하는 사진 자극에 대하여 정신분열병 환자 집단이 각성수준을 과소평가하는 경향이 두드러지게 나타났다. 이와 같은 결과를 종합하여 볼 때, 정신분열병 환자들은 정서상태의 개념화 과정에서 각성 차원에 대하여 상대적으로 낮은 민감도를 보이고 있으며, 특히 부정적인 정서상태를 표현하는 얼굴들에 대란 판단에서는 각성 차원을 과소평가하여 높은 각성수준을 나타내는 표정과 낮은 각성수준을 변별하는데 어려움을 보이는 것으로 해석될 수 있다. 본 연구의 결과는 정신분열병 환자들은 자율신경계의 높은 각성 수준으로 인하여 각성 수준을 더 높일 가능성이 있는 자극을 회피하는 경향이 있다는 Mednick의 가설과 일관되는 결과로 이들의 각성 수준에 대한 낮은 민감도는 방어적인 회피성향의 지속에 따른 둔감화의 결과로 해석될 수 있다. 효과는 GSR를 비롯한 자율신경계지표에서 잘 반영되었다.^2$=.792가 되었다. 설명되는 누적분산값은 67.18%였다.주관적 평가의 결과와 객관적 평가 결과를 이용해 마직물의 태를 평가하는 산출식을 제시하였다. 태 평가치의 경우 16가지 특성치를 모두 넣는 방법과 stepwise 방법, 또 Kawabatark 사용한 순차적 군 회귀법의 세가지 방법의 회귀식 중 16가지 특성치를 모두 넣는 방법의 결정계수가 가장 높았다.tosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Lett

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.613-622
• /
• 2012

A chrome absorbent that is useful in rapid magnetic recovery and recycling was developed though a synthesis of Multi-Terminalized Magnetic-core Dendrimer (MTMD). Divergence through coprecipitation and rotation growth was used for synthesis. The dendrimer was multi-terminilized through methyl propionate and glutaric acid. The property analysis of the synthesized sample was performed through XRD, FT-IR, TEM, EDS, TGA and zeta potential analyzer. A magnetic-core of MTMD had a magnetite crystal and the size of 4th generation dendrimer was identified to be from 15 nm to 20 nm. Through the analysis of the TGA, the rate of the dendrimer branch for the first generation dendrimer was about 7% and 3% of diminished weight occurred as the generation grows. Also, the potential of the dendrimer when multi-terminalized, had variation from 25.26 mV to -6.53 mV. As a result of MTMD adsorption experiment, it absorbed more than 80% within 5 minutes and indicated absorptivity of 6.308 mg/g. When it was compared with COOH Dendrimer (COOH-D) after magnetic recovery, the recovery time was rapidly reduced by more than half and it could recover 100% within 30 minutes. In case of the regeneration experiment that used chrome, it was identified to maintain the same adsorptivity for four runs.

• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.227-241
• /
• 2001

Several $Co_2$-rich springs in the Chungcheong area, Le., the Angsung spring, the Chojung spring, the Myungam spring, the Bukang spring and the Daepyung spring have been long known for their particular water chemistry. The occurrences of these springs are closely related to the geologic structure of Mesozoic granite such as dyke swarms, fault zones and the geologic boundary between granite and its adjacent gneiss. The $Co_2$-rich water samples show a high $Co_2$ concentration ($P_{CO2}$ 0.25 atm to 0.99 atm), weak acidic pHs and the electrical conductivity ranging from 101 to 2,950 ${\mu}$S/cm. The $Co_2$-rich water samples are classified into the Ca-$HC0_3$ type and the Ca(Na)-$HCO_3$) type in chemical composition. Environmental isotopic data $^{2}H/^{1}H, ^{18}O/^{16}O$) indicated that $Co_2$-rich water was meteoric origin. The ${\delta}^{13}C$ values of $Co_2$-rich water range from -3.1$\textperthousand$ to -6.8$\textperthousand$ PDB. The values indicate that $H_2CO_3^0$ and $HC0_3^-$ of the water samples are mainly originated from a deep-seated source and partly contributed from carbonatc minerals. The major minerals determining the chemistry of $Co_2$-rich watcr arc probably the carbonate minerals which are present as veins and secondary minerals, and the plagiocalse in granite and gneiss.

• Journal of Energy Engineering
• /
• v.13 no.4
• /
• pp.281-290
• /
• 2004

Spent refractories from a coal gasifier after 1000 hours of operation were analyzed for crystalline phases, chemical composition and microstructures as a function of slag penetration depth, and the slag corrosion mechanism was determined. The chemical corrosion of chromia refractory occurred via reaction between Cr$_2$O$_3$ of the refractory and FeO and A1$_2$O$_3$ in the slag. The FeO reacted with Cr$_2$O$_3$ at the slare/refractory interface and formed FeCr$_2$O$_4$. After all FeO were consumed, Al in the penetrating slag substituted Cr in Cr$_2$O$_3$, forming (Al, Cr)$_2$O$_3$, at the edges of the particle, which were broken to form fragments rich in Al. The corrosion resistance of Cr$_2$O$_3$ varied with the particle size and the extent of sintering, and the higher resistance was observed in the larger and more sintered particles. There was no chemical change in ZrO$_2$, but showed the effects of physical corrosion: the grain boundaries became more wavy, and ZrO$_2$ grains were split in the corroded area. The slag penetration depth increased in the refractory samples farther down from the feed nozzles.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.23-28
• /
• 2002

본 연구에서는 간단한 조작을 통하여 작물의 특성에 따라 진동방향을 조절 가능하게 함으로써 물리적 성질이 서로 다른 감자, 고구마, 마늘, 양파, 생강 등 거의 모든 뿌리작물의 수확에 이용할 수 있는 다목적 굴취기를 기구학적으로 설계하고, 뿌리작물 굴취기의 성능에 영향을 미치는 진폭, 진동수, 작업속도를 변화시킬 때 각각의 조합에 있어서 굴취판상의 특정한 점들의 운동궤적을 분석하고 이에 기초하여 굴취기의 설계변수와 작업에서의 설정변수 를 결정하고자 하였으며, 그 결과를 요약하면 다음과 같다. 1) 작업위치에 따라 굴취판 뒷부분(선별부)의 진동방향 조절이 가능하기 때문에 진동방향을 조절하면 물리적 성질이 서로 다른 감자, 고구마 마늘, 양파 등 거의 모든 뿌리작물의 수확에 이용할 수 있을 것으로 사료된다. 2) 굴취판의 궤적분석결과 진폭이 3mm일 때에는 캠 축의 회전속도와 작업속도에 관계없이 굴취작업이 불가능할 것으로 판단되었다. 진폭이 6mm일 때에는 작업속도 1.08km/hr에서 캠 축의 회전속도가 841rpm 이상이면 굴취작업이 가능할 것으로 판단되었고, 작업속도 2.16km/hr이상에는 굴취작업이 불가능할 것으로 판단되었다. 진폭이 9mm일 때에는 작업속도 1.08km/hr에서 작업할 때 사용한 캠축의 회전속도에 관계없이 굴취작업이 모두 잘 이루질 것으로 판단되었고, 작업속도 2.16km/hr에서는 캠축의 회전속도가 995rpm 일 경우에만 굴취작업이 가능할 것으로 판단되었으며, 작업속도 3.24km/hr에서는 작업위치나 캠축의 회전속도에 관계없이 모두 굴취작업이 불가능한 것으로 사료된다. 3) 작업속도를 1.08km/hr 이상으로 하려면 소요동력의 관점에서 볼 때 진폭은 크게하고 진동수는 작게 하는 것이 유리하기 때문에 진폭을 9mm이상 취하는 것이 바람직할 것으로 사료된다.회로 가장 많이 발생하였으며, 다음으로 밀양과 나주지역이 29회, 김제지역이 28회 등으로 많은 발생빈도를 보였다.생시 진화방법의 개발 등에 대한 기본data로서의 역할을 충분히 할 수 있을 것으로 사료된다. 평가되었다.us에 대하여 높은 것으로 나타났다.bangular에서 subrounded에 해당한다. 이러한 현저한 차이를 보이는 이유는 남극적 빙하성 환경 조건과 이 지역의 해양 퇴적학적 특성에 그 원인이 있다고 해석된다.ea. Our ancestors really began to drink teas from the period of Unified Sila on. This country turning to the Koryo dynasty, tea drinking manner began to prevail so much that drinking tea became a ceremony. Daring the Yi dynasty it was much camplicated to make and boil the leaf tea. As a result of the previous fact pure tea came to have disappeared and odorous pharmaceutical became prevailent. 7) For value of exploiting Kungjuk tea (ginger tea seasoned with phyllostachy and addition of honeyl) was the highest among many. The worth of developing all the teas among all the beverages was regarded as that high of 51%, while even the tea regarded as worthless obtai

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.439-447
• /
• 2020

Re-coating of the mirror is one of the important things to maintain the performance of a telescope. The metal coated on the mirror reflects light, and if the reflectance decreases, then the telescope's performance decreases, so the mirror must be periodically recoated. It is important to predict re-coating cycles for military telescopes and to develop maintenance plans not only for performance, but also for the telescope's availability for missions and the maintenance costs for long-term use. However, most similar telescopes used for astronomy research determine recoating cycles based on experience and operating conditions, and not for prediction of recoating. Therefore, this study predicts the cleaning cycles and re-coating cycles of a military telescope's mirror by using simulation. First, this study analyzed similar cases of domestic and foreign astronomy research institutes and the study also reviewed the need for re-coating and predicting re-coating cycles. Second, this study developed simulation for predicting cleaning and re-coating cycles according to data analysis and modeling. Finally, the study predicts cleaning cycles and re-coating cycles according to varying reflectance reduction (5%, 10%, 15%, 20%) and cleaning conditions (per 3 months, 6 months, 1 year and 2 years). As a result, this study suggests reference criteria to develop the planning for military telescopes and their maintenance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.487-495
• /
• 2017

The thermal characteristics of the electrodeless lamp are one of the main factors that determine the design and performance of the lamp. The coupler changes the impedance characteristic by heat and its use temperature is usually within about $150^{\circ}C$. In this study, we observed the phenomenon when the coupler was exposed at a temperature of $150^{\circ}C$ or higher, which has not been discussed so far. Two types of coupler A and coupler B with different spacing between the inner tube and the coupler were analyzed for electrical, thermal and optical properties and deterioration characteristics with different heat and heat shielding conditions. First, the impedance of the system is obtained and used as a criterion for analyzing the electrical characteristics through it. The diameters of the two types of couplers are 1 mm, and the experimental result shows that the coupler diameter is 1 mm, which can cancel out the loss of the magnetic field strength. Therefore, based on these results, when the coupler is exposed to high temperature of about $200^{\circ}C$, the efficient design method corresponding thereto is proposed.