• Journal of the Economic Geographical Society of Korea
• /
• v.20 no.4
• /
• pp.453-485
• /
• 2017

One of the oldest chestnuts in economic geography is this: Cultural and creative industries strongly gather in large cities and this geographic concentration of economic activities leads to regional development. Of course, depending on the circumstances, such a proposition still holds good. But, under the current paradigm shift to knowledge-based economy, it may be open to question. This study aims to investigate financing and knowledge accumulation in the film industry through an alternative framework for explaining their spatial distributions, "formation mechanism of economic space." From the fact that their production organizations are formed on a project basis, project-based financing structure in the investment stage and knowledge accumulation process in the production stage form both axes of it. Film industry as the most mature industry among the cultural and creative industries does not always concentrate in a certain place (industrial agglomeration) or show metropolis-oriented preference. This allows us to reconsider our long brooding theory.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.461-470
• /
• 2013

In order to examine the anticariogenic effect after fluoride varnish was applied to sound enamel and artificial caries enamel, anterior teeth of healthy cattle were used and divided into four groups such as group 1 (sound enamel), group 2 (application of fluoride varnish to sound enamel), group 3 (artificial caries enamel) and group 4 (application of fluoride varnish to artificial caries enamel). Remineralization on the surface of enamel and changes of crystalline structure after demineralization were observed by using a field emission scanning electron microscope (FE-SEM). Quantitative analysis of Ca and P was measured by using the energy dispersive X-ray spectrophotometer (EDS). The following conclusions were obtained: 1)Surface pattern of enamel was the roughest in group 3 due to the defects caused by porosity and microcracks. Group 4, group 1 and group 2 were followed in order; 2) It was found that pattern of crystalline structures in a group of application of fluoride varnish and a group of no application showed bigger change in artificial caries enamel than that in sound enamel. In other words, groups 4 and 1 showed a similar pattern; 3) The contents of Ca and P were higher in groups of application of fluoride varnish (group 2 and group 4) than in groups of no application of fluoride varnish (group 1 and group 3). Taken results of this study together, in the case of application of fluoride varnish, crystalline structure was changed by remineralization even in the sound enamel. In particular, porous structures showed a smooth and uniform pattern due to the recalcification in the artificial caries enamel. In addition, according to results of EDS analysis, the contents of Ca and P were increased and it had great anticariogenic effects which inhibit decalcification of sound enamel and artificial caries enamel.

• Journal of Chest Surgery
• /
• v.29 no.5
• /
• pp.517-523
• /
• 1996

From May 1988 to June 1994, )73 patients underwent exploratory thoracotomy for resection of non- small cell lung cancer, and 48 patients staged pathologically as lIIB were analyzed. 74 lesions were involvement of great vessel (n=26), heart (n=5), ipsilateral lung metastasis(n=4), esophagus (n=4), carina(n=3), mediastinum (n=2), trachea(n=1), spine (n=1) and 13lourO seeding(A=15). N3 lesions were involved in 6 patients. Extended pulmonary resection with radical mediastinal node dissection was possible in 25 patients, and exploration only was performed in 23 patients. The most frequent cause of unresectability was pleural seeding. Postoperative morbidity was )2 % (8125) and mortality was 16 % (41 25) in resected group. The adjutant therapy was given to 37 patients. The 1 year and 3 year survival for resected group ncluding operative deaths was 57.2%, and 2).8 % (median 15 months), but 48.4%, and 0 % (median 7 months) for exploration only group (Log-Rank test, p : 0.17). Our results suggest that extended pulmonary resection might be helpful for carefully selected patients with 74 non-small cell lung cancer, but meticulous preoperative work-up for staging, especially to detect pleural seeding and Invasion to the irlediastinal structures is a prerequisite to avoid unnecessary thoracotomy.

• Plant Journal
• /
• v.11 no.1
• /
• pp.39-49
• /
• 2015

The objective of this study is to improve the classification structure of commodity code for piping material management which is considered as the fundamental of commodity code and piping material management system. It enhances the efficiency of piping material management directly or indirectly affecting the engineering, procurement and construction in a petrochemical plant projects. To establish an improved code classification structure, this study identifies the problems of former code classification structure in details, as well as the characteristics of other domestic and global EPC company's code classification structures and presents the improved direction considering the recently mega-sized and specialized projects. Accordingly, to efficiently enhance piping material management, the improved code classification structures have been derived from defining suitable code classification structure for specific piping component, adding more standard attribute, expanding the number of code digits and classifying code hierarchy. The results of applying the improved classification structure of commodity code to on-going project have led to reduce the rate of rework from 4.98% to 2.48% for developing purchase description and also have saved working time for executing piping design by 3D modeling from 6 months by two persons to 4 months by a person which is decreased 67% consequently. In addition, the structures of pyramid code management have resulted to accumulation and analysis of the various piping data for other disciplines such as procurement and estimation team which require commodity code information through the company's material control system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.13-24
• /
• 2000

Current specification prescribes that upper and lower reinforcement mat is required in the same amount to resist negative and positive moment in bridge decks. But the negative moment is much smaller than positive moment because the actual behavior of decks consists of local deflection of slab and global deflection of girder. From this study, the analysis method based on harmonic analysis and slope-deflection method was developed and verified by finite element method. The negative moment, obtained from this method, were smaller than those computed based on the KHBDC specifications as much as 40∼50% in the middle of bridge. The amount of reduction of the design negative moment was shown herein to be dependent on variable parameters as shape factor(S/L) of slab, relative stiffness ratio of girder and deck slab, and so on. This investigations indicate that the upper reinforcement mat to resist negative moment can be removed. But further experimental study is required to consider durability and serviceability. From this new design concept, the construction expense can be reduced and the problem of decreasing durability resulting from corrosion of upper reinforcement steel settled.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.25-35
• /
• 2000

The superstructure of general bridge like slab bridge and slab on girder bridge is composed of elastically supported isotropic plate. The objective of this study is to develop the new analysis method for elastically supported plate with general edge beam or girder(boundaries) under arbitrary out of plane loading. The displacement solutions for the macro-element of plate and beam are obtained by solving for the unknown interactive forces and moments at the beam or nodal line locations after satisfying equilibrium equation along the nodal line. The displacement functions for macro-elements ate proposed in single Fourier series using harmonic analysis, and the equilibrium equations of nodal line are composed by using slope-deflection method. The proposed analysis method is programmed by MS-Fortran and can be applied to all types of isotropic decks with bridge-type boundaries. Numerical examples involving elastically supported plates with various aspect ratio, loading cases, and bridge-type boundary conditions are presented to demonstrate the accuracy of this program. The major advantage of this new analysis method is the development of a simple solution algorithm, leads to obtain rapidly responses of bridge deck system. This proposed method can be used in parametric study of behavior of bridge decks.

• Korean Journal of Materials Research
• /
• v.28 no.9
• /
• pp.528-533
• /
• 2018

In recent years, solar cells based on crystalline silicon(c-Si) have accounted for much of the photovoltaic industry. The recent studies have focused on fabricating c-Si solar modules with low cost and improved efficiency. Among many suggested methods, a photovoltaic module with a shingled structure that is connected to a small cut cell in series is a recent strong candidate for low-cost, high efficiency energy harvesting systems. The shingled structure increases the efficiency compared to the module with 6 inch full cells by minimizing optical and electrical losses. In this study, we propoese a new Conductive Paste (CP) to interconnect cells in a shingled module and compare it with the Electrical Conductive Adhesives (ECA) in the conventional module. Since the CP consists of a compound of tin and bismuth, the module is more economical than the module with ECA, which contains silver. Moreover, the melting point of CP is below $150^{\circ}C$, so the cells can be integrated with decreased thermal-mechanical stress. The output of the shingled PV module connected by CP is the same as that of the module with ECA. In addition, electroluminescence (EL) analysis indicates that the introduction of CP does not provoke additional cracks. Furthermore, the CP soldering connects cells without increasing ohmic losses. Thus, this study confirms that interconnection with CP can integrate cells with reduced cost in shingled c-Si PV modules.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.317-322
• /
• 2015

Salinity gradient power is a system which sustainably generates electricity for 24 hrs, if the system is constructed at a certain place where both seawater and river water are consistently pumped. Since power is critically determined by the water flux and the salt rejection, a membrane of water-semipermeable aquaporin protein in cell membranes was studied for pressure-retarded osmosis. NaCl was used as a salt, and $NaNO_3$ was used as a candidate to check the ion selectivity. The water flux of biomimetic aquaporin membranes was negligible at a concentration below 2M. Also, there is no remarkable dependence of water flux and ion selectivity on concentrations higher than 3M. Therefore, the biomimetic aquaporin membrane could not be applied into pressure-retarded osmosis; however, if a membrane could overcome the current limitations, the properties shown by natural cells could be accomplished.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.83-90
• /
• 2010

In wireless sensor networks, the data transmitted from the sensor nodes are susceptible to corruption by errors which caused of noisy channels and other factors. In view of the severe energy constraint in Sensor Networks, it is important to use the error control scheme of the energy efficiently. In this paper, we presented RS (Reed-Solomon) codes in terms of their BER performance and power consumption. RS codes work by adding extra redundancy to the data. The encoded data can be stored or transmitted. It could have errors introduced, when the encoded data is recovered. The added redundancy allows a decoder to detect which parts of the received data is corrupted, and corrects them. The number of errors which are able to be corrected by RS code can determine by added redundancy. The results of experiment validate the performance of proposed method to provide high degree of reliability in low-power communication. We could predict the lifetime of RS codes which transmitted at 32 byte a 1 minutes. RS(15, 13), RS(31, 27), RS(63, 57), RS(127,115), and RS(255,239) can keep the days of 173.7, 169.1, 163.9, 150.7, and 149.7 respectively. The evaluation based on packet reception ratio (PRR) indicates that the RS(255,239) extends a sensor node's communication range by up about 3 miters.

• Journal of Life Science
• /
• v.23 no.4
• /
• pp.487-494
• /
• 2013

An AlaAT knock-out mutant (alaat) of rice (Oryza sativa L.) was isolated from T-DNA tagging lines and the genotypes of its progeny were determined with AlaAT1-specific primers. The alaat phenotypes showed decreased growth and grain yield when compared with control plants. The activity of AlaAT1 in the mutant plants was practically undetectable. The responses of alaat plants to growth under salt stress were compared with those of control plants by measuring chlorophyll fluorescence and the activities and mRNA expression of antioxidant enzymes. All abiotic stresses tested (salt, drought, and chilling) caused a similar decrease in chlorophyll fluorescence in both alaat and wild type plants. The activity of peroxidase (POX), an antioxidant enzyme, decreased following salt treatment of alaat plants, while control plant showed an increased activity. The mRNA levels for cAPX (cytosolic ascorbate peroxidase), POX2, and AlaAT were determined by RT-PCR following salt stress. No AlaAT1 mRNA was detected in alaat plants. The POX2 mRNA showed a slightly increased level in the wild type but was not detected in alaat plants, in agreement with the activity assays. The levels of cAPX mRNA were greatly increased in both the wild type and alaat plants. The salt stress effects on rice plant growth are therefore proposed to reflect a loss of function of AlaAT, which alters the activity and synthesis of antioxidant enzymes (especially peroxidases), rather than a direct effect on photosynthesis.