• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.135-144
• /
• 2005

Consumers' awareness of product value, and their product preferences, are becoming increasingly influential in product development, particularly in corporations' efforts in manufacturing products with a competitive edge. Corporations conduct surveys on consumers' product satisfaction and preferences and conduct in-depth studies on consumer needs. They then manufacture products in accordance with the results of these surveys and studies. With the necessity and demand for digital door lock products recently growing, this research sought to explore product competitiveness reinforcement factors that could facilitate market penetration, and to formulate corresponding design strategies. In-depth consumer interviews were also conducted to identify consumer lifestyles and needs. Furthermore, consumer preference images, purchase and use-related patterns, and the status of door lock markets were studied. In the past, to design and manufacture consumer-oriented products, corporations primarily resorted to the improvement of the products' technological features. At present, the users' product preferences and the ways that they use these products are the factors that determine product design. Consumers today tend to adjust their lifestyles according to available products, and prefer products that have greater value in terms of lifestyle and culture. Strategic points for reinforcing competitiveness were presented in this study: first, offering different values that will enhance consumer satisfaction, second, positively developing bio-recognizable methods that will boost consumer preference, third, meeting the consumers' expectations that door lock products should not be mere 'entrance and exit control' systems, but network security systems and fourth, adopting convenient authentication methods backed by advanced technologies.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.159-159
• /
• 2011

수자원 공급의 시 공간적 편차가 큰 우리나라에서는 수자원을 이용하기 위해서 다수의 댐을 건설하고 있다. 특히, 생활수준의 향상으로 용수 수요가 급증하였기 때문에 용수가 부족한 곳에는 광역상수도 사업 등을 통하여 용수를 공급하고 있다. 댐에서 용수가 공급되기까지의 과정은 일종의 관수로 흐름으로 생각할 수 있다. 관수로 내를 흐르는 유체가 갑자기 정지하게 되면, 유체 운동 에너지의 변화가 유발되고, 그로 인해 관내에 급격한 압력의 상승이 일어나게 된다. 반대로 정지하고 있던 유체가 빠른 속도로 흐르게 되면 압력 감소가 급격하게 발생한다. 이와 같이 유체 운동 상태의 급변에 의한 압력변화와 그에 따른 압력파가 음속의 속도로 상 하류로 전파되는 현상을 수격작용(waterhammer)이라 한다. 통상적으로 수격작용은 밸브 개폐 정도가 갑자기 바뀔 때, 펌프의 급격한 기동이나 정지 시, 터빈 내 전력소요가 갑자기 바뀔 때, 댐 수위의 갑작스런 변화, 펌프 임펠러의 진동, 물 수요의 급격한 변화 등에 의해 발생하며, 수격작용은 유체의 질량과 운동량 때문에 관 벽에 큰 힘을 가하게 되어 정상적인 동수압 보다 몇 배나 큰 압력을 발생시킴으로 관 자체는 물론 펌프, 밸브, 터빈 등 관 시설물을 파손시키거나 진동, 소음 등을 야기시킴으로 대규모 건물, 공장, 발전소 등을 설계할 경우 그에 대한 적절한 대책을 강구하여야 한다. 특히 댐에 연결된 저수지 또는 조정지로부터의 도수로가 압력수로이며 그 길이가 상당히 크면 수차가 급정지했을 경우 수격작용에 의해서 압력터널 내에 과도한 압력상승이 일어난다. 이 압력상승을 방지함과 함께 발전소 부하의 증감에 따라서 수량을 공급하거나, 흡수할 목적으로 압력도수로와 수압관과의 접합부에 자유수면이 있는 수조를 설치한다. 이것을 조압수조(surge tank)라 한다(최영박, 1979). 조압수조에서 부하의 급속한 차단에 의해서 수차로 유입될 수량이 차단되면 도수로 내로 흘러 들어온 물은 관성 때문에 수조 내의 수위를 상승시키고, 수조 수위가 어느 정도 이상으로 되어 저수지 수위 보다 상승하면 수조로의 유입이 정지하고 반대로 수조에서 저수지로 역류하여 수조수위는 하강한다. 즉, 조압수조는 도수로 내에 발생한 과도한 압력을 수조 내 수면의 승강운동을 이용하여 감소시키고 원래의 안정적인 수위로 회복시킨다. 본 연구에서는 수격작용에 대한 댐 안정성을 확보하는 수단 중의 하나인 조압수조에 대해 살펴보았다. 연구대상으로 용담댐을 선정하였다. 용담댐에 대한 기존의 검토결과 수직 갱의 지름이 5m 이상이면 조압수조의 동적안정조건을 만족 시키는 것으로 조사되었다. 댐의 설계홍수위인 EL. 265.5m를 기준으로 조압수조의 안정성을 감소시키지 않는 범위 내에서 조압수조 내 격벽 설치 유 무에 따른 수조의 최적 크기를 산정하였다. 산정결과를 분석한 결과 동일 조건에서 격벽을 설치한 경우가 격벽을 설치하지 않은 경우에 비해서 조압수조의 면적이 약 21% 감소하는 것으로 나타났다.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.468-475
• /
• 2018

The current system of making course evaluations mandatory in universities in Korea in order to supplement low participation levels is a major hindering factor for the validity of the evaluation results due to students' insincere responses. This study points out the problems in course evaluations that are in the form of surveys and instead proposes a sample course evaluation system that utilizes a sample mean to deduce a population mean, attempting to prove through simulation that this is statistically significant. Thus, small, medium, and large scale courses as well as cyber courses that were available in S University in the fall 2016 semester were set as the population, and each course's evaluation average grade was set as the population mean. Furthermore, we used the average grade and standard deviation of the same courses from the previous year in order to decide the sample number, the reliability level was set as 95%, and the margin of error was set as ${\pm}0.25$. As a result of carrying out a simulation using the data analysis tool R, all the courses (small scale, medium scale, large scale, and cyber) showed to have a reliability level close to 95% including the population mean, and consequently practicality of the representative sample course evaluation system was proven.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.471-480
• /
• 2009

According to former studies, people can imagine the specific taste by the specific color, not every color. Besides, studies also say that the relation between colors and tastes is decided by personal experience and frequency about the color of food. So the authors supposed that there is the specific color related the taste. To find the relation, we selected 24 colors and 24 taste adjectives mainly used by people. Then, we examined taste imagined on color with questionnaires of 20 college students who are sensitive to colors and able to use all 24 taste adjectives. Then we analyzed the result by MDS. Finally we could find 5 definite relations between colors and tastes. The result suggested that the number of colors which can be associated with tastes are quite limited. Also, only limited colors can be associated with tastes and it is different by sex. This study shows not only the relation between the color and the taste but also how closely the taste is related to other colors. This study can be used for effective food package design, advertising and so on.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.549-554
• /
• 2011

The effect of full bloom date and growing season weather on harvesting date of 'Niitaka' pear (Pyrus pyrifolia) in Naju province and the model of multiple linear regression for predicting the fruit growing days was studied. Earlier year in full bloom date, the harvesting date tended earlier but fruit growing days tended longer. Mean and coefficient of variation of fruit growing degree days (GDD) accumulated daily mean and maximum temperature at the base of $0^{\circ}C$ from full bloom date to harvesting date was 3,565, 2.9% and 4,463, 2.5%, respectively. Fruit growing days was not correlated with the fruit GDD accumulated daily mean and maximum temperature at the base of $0^{\circ}C$ in each month but highly correlated with GDD accumulated daily meteorological factors at days after full bloom date. Especially, it was highly negatively correlated with GDD accumulated daily mean and maximum temperature at the base of $0^{\circ}C$ from $1^{st}$ day after full bloom to $60^{th}$ day. The determination coefficient ($r^2$) of multiple linear regression model by full bloom date, GDD accumulated daily mean and maximum temperature from $1^{st}$ day after full bloom to $60^{th}$ day for predicting fruit growing days was 0.7212. As a result, the fruit growing days of 'Niitaka' pear in Naju province can predict with 72% accuracy by the model of multiple linear regression.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.165-171
• /
• 1998

The $Y_1Ba_2Cu_3O_{7-x}$(123) superconductor powders were prepared by pyrophoric synthesis method(PSM) using $Y_2O_3$(99.9%), $BaCO_3$(99.9%), and CuO(99.9%) powders. The phase formation and reaction kinetics of 123 superconductor manufactured with powders prepared in various pHs of pyrophoric synthetic solution have been studied through the experiments at various heat treatment temperatures and times. Inductively coupled plasma(ICP) spectroscopy and scanning electron microscopy(SEM) measurements were performed to examine the composition and morphology of the sample. X-ray diffraction(XRD) analysis was done to determine phase formation and conversion ratio of Y-Ba-Cu-O systems. The 123 powder prepared at pH 7(${\pm}0.3$) yields the best result in terms of purity, homogeneity, and reactivity. The activation energies(${\Delta}E_a$) of 123 phase formation were found to be 191 kJ/mol and 230kJ/mol in solid state reaction method and pyrophoric synthesis method, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1263-1269
• /
• 2005

Horseradish peroxidase, had the phenol degradation rate of 95% in aqueous phase, was covalently immobilized on the surface of reticulated vitreous carbon(RVC) and the degradation of phenol was performed with in situ generated $H_2O_2$-immobilized HRP complex in an electrochemical reactor. The incorporation of carboxylic group on the RVC surface was confirmed by FT/IR spectrometry and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride(EDC) was used for peptide bonds between the carboxylic groups on the RVC surface and amine groups from HRP. The optimal conditions of in situ $H_2O_2$ generation such as concentration($10{\sim}200$ mM) and pH($5.0{\sim}8.0$) of electrolyte, supply of $O_2(10{\sim}50$ mL/min) and applied voltage($-0.2{\sim}-0.8$ volt, vs. Ag/AgCl) from potentiostat/galvanostat were determined by concentration of hydrogen peroxide and current efficiency. It was observed that the RVC immobilized HRP was stable maintaining 89% of the initial activity during 4 weeks. The phenol degradation rate of 86% was attained under the optimal condition of in situ $H_2O_2$ generation.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.925-935
• /
• 2020

This study aims to provide guidelines for the activities of workplace health managers by identifying their excellent health promotion activities and motivations. For this, consent for the study was obtained from 21 workplace health managers who had worked at the same company for more than five years, and a semi-structured questionnaire was sent via email to collect and qualitatively analyze the data. As a result, 17 categories and three topics were drawn. The derived topics included a sense of reward and accomplishment as workplace health managers, difficulties encountered as workplace health managers, and how to solve the difficulties. The survey respondents answered that they feel a sense of reward and accomplishment when workers open their mind, change their daily life, express gratitude, and pioneer new fields. On the other hand, they feel difficulties with unpredictable health, changes in the organizational culture, secrecy of disease, and people who think their job is easy. As a way of overcoming such difficulties, the research subjects said that it is necessary to read the minds of workers, let them know by themselves, use existing programs, have the most difficult people on their side, and spread their achievements. The results of this study revealed that it is required for workplace health managers to develop professional skills and emphasize the importance of health management to the policy-makers and employees of their workplace by continuously reporting health management performance. In addition, they need to actively benchmark the success strategies of exemplary workplace health managers.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.265-267
• /
• 2005

DNA 컴퓨팅은 분자 수준(molecular level)에서 연산을 수행한다. 따라서 일반적인 실리콘 기반의 컴퓨터에서와는 달리, 순차적인 연산 제어를 보장하기 어렵다는 특징이 있다. 그러나 DNA 컴퓨팅은 화학반응에 기초한 연산이기 때문에, 실험자가 의도한 연산을 많은 수의 분자에 동시에 적용할 수 있으므로 실리콘 기반의 컴퓨터와는 비교할 수 없는 병렬 연산을 구현할 수 있다. 병렬 연산을 구현하고자 할 때, 일반적으로 연산에 사용하는 모든 DNA 분자들을 대상으로 연산을 구현할 수도 있다. 그러나 전체가 아닌 일부의 분자들을 상대로 연산을 수행하는 것 역시 가능하며 이 때 자연스러운 방법으로 사용할 수 있는 방법이 배깅(Bagging)이나 부스팅(Boosting)과 같은 앙상블(ensemble) 계열의 학습 방법이다. 일반적인 부스팅과 달리 가중치를 부여하는 것이 아니라 특정 학습자(learner)를 나타내는 분자들을 증폭한다면 가중치를 분자의 양으로 표현하는 것이 가능하므로 분자 수준에서 앙상블 계열의 학습을 구현하는 것이 가능하다. 본 논문에서는 앙상블 계열의 학습 방법 중 특히 부스팅의 효과를 DNA 컴퓨팅에 응용하고자 할 때, 어떤 방법이 가능하며, 표현 과정에서 고려해야 할 사항은 어떠한 것들이 있는지 고려하고자 한다. 본 논문에서는 규모를 사전에 한정할 수 없는 진화 가능한 그래프 구조(evolutionary graph structure)를 학습할 수 있는 방법을 찾아보고자 한다. 진화 가능한 그래프 구조는 기존의 DNA 컴퓨팅 방법으로는 학습할 수 없는 문제이다. 그러나 조합 가능한 수를 사전에 정의할 수 없기 때문에 분자의 수에 상관없이 동일한 연산 시간에 문제를 해결할 수 있는 DNA 컴퓨팅의 장정을 가장 잘 발휘할 수 있는 문제이기도 하다.개별 태스크의 특성에 따른 성능 조절과 태스크의 변화에 따른 빠른 반응을 자랑으로 한다. 본 논문에선 TIB 알고리즘을 리눅스 커널에 구현하여 성능을 평가하였고 그 결과 리눅스에서 사용되는 기존 인터벌 기반의 알고리즘들에 비해 좋은 전력 절감 효과를 얻을 수 있었다.과는 한식 외식업체들이 고객들의 재구매 의도를 높이기 위해서는 한식 외식업체의 서비스요인, 식음료요인, 이벤트 요인 등을 강화함으로써 전반적인 종사원 서비스 품질과 식음료품질을 높이는 전략을 취해야 한다는 것을 시사해주고 있다. 본 연구는 대구 경북소재 한식 외식업체만을 대상으로 하여 연구를 실시하여 연구의 일반화와 한식 외식업체를 이용하는 이용 고객들이 한식 외식업체를 재방문하는 재구매 의도가 발생하는데 있어 발생하는 과정을 설명하는 종단적 연구를 실시하지 못한 한계점을 가지고 있다.아직 산업 디자인이 품질경쟁력에 크게 영향을 미치는 성숙단계에 이르지 못하였음을 의미한다. (2) 제품 디자인에게 영향을 끼치는 유의적인 변수는 연구개발력, 연구개발투자 수준, 혁신활동 수준(5S, TPM, 6Sigma 운동, QC 등)이며, 제품 디자인은 우선 품질경쟁력을 높여 간접적으로 고객만족과 고객 충성을 유발하는 것으로 추정되었다. 상기의 분석결과로부터, 본 연구는 다음과 같은 정책적 함의를 도출하였다. 첫째, 신상품 개발과 혁신을 위한 포괄적인 연구개발 프로젝트를 품질 경쟁력의 주요 결정요인(제품의 기본성능, 신뢰성, 수명(내구성) 및 제품 디자인)과 연계하여 추진해야 할 것이다. 둘째, 기업은 디자인 경영 마인드 제고와 디자인 전문인력 양성을, 대학은 디자인 현장 업무를 통하여 창의력 증진과 기획 및 마케팅 능력 교육을, 정부는 디자인 기술개발 및 디자인 교육지원의 강화를 통하여 각각 디자인 경쟁력$\righta

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2831-2836
• /
• 2009

If a design load exceeding the frictional force of the contact surface is applied to the connection of steel members using a high-tension bolt friction joint, sliding occurs and the connection of the steel members bears the design load through the shear strength and bearing strength of the bolt and the base plate. The sliding distance can be determined by the tensile force of the bolt, the friction coefficient of the contact surface, and the position of the bolt in the base plate hole. This study measured and analyzed sliding according to standard bolt hole and oversize bolt hole when pure bending moment and tensile force were applied to high-tension bolt joints with different sizes of bolt holes made in the base plate and the cover plate. In a high-tension bolt joint receiving pure bending moment and tensile force, the load causing sliding in an oversize bolt hole was $74\sim94%$ of that in a standard bolt hole. In a member receiving tensile force, the sliding load ratio was lower when the size of oversize bolt holes in the base plate and the cover plate was large. In addition, the size of the oversize bolt hole in the base plate was more closely correlated with the change of sliding loadthan the size of the oversize bolt hole in the base plate.