• Korean Journal of Construction Engineering and Management
• /
• v.18 no.2
• /
• pp.12-20
• /
• 2017

The biggest reason to prefer the remodeling is a relatively short period of time (5~6 years) compared to the reconstruction work that takes 8~9 years. In addition, from the perspective that the period of temporary residence is usually 24 months, the necessity of shortening is greater. Also, since the remodeling construction period is approximately 28~35 months on average, the strategies and efforts are needed to make up for the shortening the remodeling construction period. For these reasons, this paper is to develop an estimating model for normal project duration of apartment remodeling project. This model is reflected in the remodeling properties thorugh difference analysis of the new apartment construction project. Demolition works, reinforcement works, extension works are different, so this paper newly defines these construction work's duration in normal project duraion of remodeling. Case study and experts interviews are used to validate normal project duration. This model can be used to calculate rough construction period each alternatives, and will help a strategic decision making among the stakeholders.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.45-52
• /
• 2015

The interoperability of multi-source data has become more important due to various digital maps, produced from public institutions and enterprises. In this study, the automatic matching algorithm of multi-source building data using hierarchical matching was proposed. At first, we divide digital maps into blocks and perform the primary geometric registration of buildings with the ICP algorithm. Then, corresponding building pairs were determined by evaluating the similarity of overlap area, and the matching threshold value of similarity was automatically derived by the Otsu binary thresholding. After the first matching, we extracted error matching candidates buildings which are similar with threshold value to conduct the secondary ICP matching and to make a matching decision using turning angle function analysis. For the evaluation, the proposed method was applied to representative public digital maps, road name address map and digital topographic map 2.0. As a result, the F measures of matching and non-matching buildings increased by 2% and 17%, respectively. Therefore, the proposed method is efficient for the matching of building polygons from multi-source digital maps.

• The Korean Journal of Mycology
• /
• v.43 no.3
• /
• pp.158-164
• /
• 2015

A total of 509 rice panicle samples were collected at harvest time from fields in 8 provinces from 2010 to 2014. One hundred five grains per sample were plated on potato dextrose agar and 6,658 Fusarium isolates were obtained; among them, 67 were identified as Fusarium armeniacum by sequencing the translation elongation factor $1{\alpha}$ ($EF-1{\alpha}$) and confirmed by their morphological and cultural characteristics. Considerable variation in conidial size, colony color and $EF-1{\alpha}$ sequences was observed among the fungal isolates. The ability of 24 F. armeniacum isolates to produce T-2 and HT-2 toxin in potato sucrose agar was determined using liquid chromatography-mass spectrometry. Twenty one isolates produced T-2 and HT-2 toxin, resulting in varying toxin levels among the isolates. The results show that Korean isolates of F. armeniacum have diversity with respect to morphological, cultural, genetic, and toxigenic properties.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.6
• /
• pp.1571-1582
• /
• 2015

This paper suggests a methodology for linking technology classification of nongovernmental information security field and technology classification of cyber-warfare in national defense field. Based on this methodology, Multi-Attribute Utility Theory(MAUT) is applied for the purpose of selecting promising nongovernmental technology that is worthy of later introduction or development. After studying the result of the survey regarding the research progression plan of the selected promising technology, the following three facts are discovered: Firstly, the greater the social spillover effect, the greater the need for the government lead R&D. Secondly, among the spillover effects, the social aspect has the highest correlation with respect to the need for the government lead R&D, while the economical aspect and the technological aspect come in the second and the third place, respectively. Finally, according to the correlation analysis, the defense application and the technological importance do not affect the subject of investment or the subject of development. This indicates that even though the R&D for technology with high social spillover effect should be lead by the government, the subject of the investment or the development cannot be determined solely by factors such as military application and technological importance.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.215-224
• /
• 2005

With the recent increase of sensitivity to decors, there has been an ever-increasing significance of exhibiting the beauty of the outer looks of an article. This trend has necessarily led to the diversification and also specialization of the color scheme activities. And so, it is inevitable that we should form the substantial ideas of the color scheme and further on, enhance the efficacy of its orientation under the prevailing circumstances. Now, we come to a realization that we must first take a glance at the whole picture of the arrays of color embedded in a variety of articles in the sixties and seventies of the 20th century, a bold introduction of color designs, thereby tracing the birth of color designs and finding a meaning in its mechanism. This study begins with the obtaining of a large collection of articles in those days, along with the literature on the commercial effects color suggest, and looking into the background of their trend and finding a meaning that underlies what these colors suggest. The general idea of those color designs exemplifies that the color selection was none other than the simplicity and convenience in the making of things in doser relation to the easy selling. With the advance of material quality and enhancement of the industrial idealism, it has been proved that color plays an important role in depicting the image of quality and tastes of class. In that role color has been given the indicator of visual delights and differentials in quality articles. All this has been reflected in a diversity of articles: for instance, white for household appliances, prime color for living necessaries and natural color for the decore like furniture. Formerly, after all, people used to have little regard for color. What is color for, it was thought, in relation to the selling image of articles? That is wily our preceding generation pays attention only to the first-hand looks of articles, neglecting the intensive study on color. We are beginning to understand what image a certain color scheme evokes in our feeling.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.209-216
• /
• 2014

One of the widely used NDT(Non-destructive techniques) is the ultrasonic pulse velocity (USPV) method, which determines the travel time of the ultrasonic pulse through the tested materials and most studies were focused on the results expressed in time domain. However, the signal of ultrasonic pulse in time domain can be transformed into frequency domain, through Fast fourier transform(FFT) to give more useful informations. This paper shows a comparison of changes in the pulse velocity and frequency domain signals of concrete for various load histories using lightweight fine aggregates. The strength prediction equation for normal concrete using USPV cannot be used to estimate lightweight fine aggregate concrete strength. The signals in frequency domain of ultrasonic pulse of lightweight fine aggregate concrete does not show any significant difference comparing with those of normal concrete. The increases in stress levels of concrete change the pulse velocities and maximum frequencies, however the apparent relationship between themselves can not be found in this experiment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.196-201
• /
• 2014

As political circumstances in oversea countries and Korea varies, the risk of vulnerability from unexpected extreme loading conditions, such as explosions or extreme impacts, also increased. In addition, construction companies in Korea recently have taken chances of overseas expansion to countries where their domestic situations are not in rest. Therefore, the resistance of construction materials for blast or impact loading become taking more consideration from engineering field. This study is a part of the research to develop a high performance fiber reinforced cementitious composite materials with high volume steel fibers and primary purpose of this study is to find an optimum mix proportions of in-fill slurry. In order to accomplish the tasks this study performed experimental investigations on the slurry for consistency, compressive strength, flowability, J-penetration, bleeding and rheology properties as well as mechanical properties, compressive and flexural strength, with respect to different mix proportions.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.26-37
• /
• 2009

Ministry of Land, Transportation and Marine Affairs(MLTM) has implemented Construction CALS project for improving productivity of construction industry and for making construction project management efficient by responding to informatization and knowledge base society in 21st century. CALS has beeb applied successfully to projects form MLTM, however, the outcomes of Construction CALS hasn't been recognized. In addition, there is no way to find how high the level of Construction CALS is when it is compared with other SOC informatization projects. This study found out the informatiziation level of Construction CALS by using the evaluation index proposed in the former study, and by comparing with other sectors. The evaluation on the level was implemented in the three parts such as informatization infrastructure(network, hardware, standardization, data, informatization, informatization security), informatization utilization(information usage, IT performance), and informatization support(informatization goal, organization of informatization, informatization investment, informatization education), and then, this evaluation was compared with "Assessment for level of industry information system", "Assessment for level of small and midium sized industry information system", and "IICI(Informatizaion Index for the Construction Industry)". With the result from the comparison, this study produced superior factors and inferior factors for each sector. These results are expected to be useful for prioritizing budget allocation by finding out the informatization level of Construction CALS.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.506-514
• /
• 2013

This study examined the feasibility on the construction of a wood industrialization service center for a wood industry cluster establishment in Jeollanam-do. Construction of the wood industrialization service center is based on a discount rate of 3.5%, an investment period of 4 years, a business operations period of 16 years and an investment cost of 24600 million won; the total amount of the net present value, the cost-benefit ratio and the internal rate of return were assumed to be 2.579 million won, 2.51%, and 10.1%, respectively. In addition, the production inducement coefficient, the induced production effect, the income-induced coefficient, the income inducement effect, the employment inducement coefficient, and the employment inducement effect were estimated 1.4345, 35287 million won, 0.1655, 4000.7 million won, and 0.4665, 1,145 people, in the effects of the wood related industries using the multi-regional input-output model, respectively. Financial independence of operating income to cover its own costs incurred in accordance with the operating project might be practicable.

• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.17-24
• /
• 1997

We developed PC-based planning system for linear accelerator based stereotactic radiosurgery. The system was developed under Windows 95 on Pentium Pro$\^$(R) 200 ㎒ IBM PC with 128 MB RAM. It was programed using IDL$\^$(R)/ of Research Systems, Inc. as a programing tool. CT image data obtained with BRW stereotactic frame is transferred to PC through magnetoptical disk. As loading the image, the system automatically recognizes the location of rods and establishes stereotactic coordinates. It accurately calculates and corrects the coordinates, degree of tilting, and magnification rate of axial images. After the coordinates is defined we can delineate and edit the contours of target and organs of interest on axial images. Upon delineating contours of target, isocenter is determined automatically and we can set up the beam configuration for radiosurgery. The system provides beam's eye view and room's eye view for efficient confuguring of beams. The system calculates dose distribution 3-dimensionally. It takes 1 to 2 minutes to calculate dose distribution for 5 arcs. We can verify the dose distribution on serial axial images. We can analyze the dose distribution quantitatively by evaluation of dose-volume histogram of target and organ of interest. This system, PC-based radiosurgery planning system, includes the basic features for radiosurgery planning and calculates dose distribution within reasonable time for clinical application.