• Journal of Korea Water Resources Association
• /
• v.32 no.1
• /
• pp.71-81
• /
• 1999

The objective of this study is to develop a model which can design an optimal pipe network system of least cost while satisfying all the design constraints including hydraulic constraints using a genetic algorithm technique. Hydraulic constraints interfaced with the simulation program(KYPIPE) checked feasible solution region. Genetic algorithm(GA) technique is a relatively new optimization technique. The GA is known as a very powerful search and optimization technique especially when solving nonlinear programming problems. The model developed in this study selects optimal pipe diameters in the form of commercial discrete sizes using the pipe diameters and the pumping powers as decision variables. The model not only determines the optimal diameters and pumping powers of pipe network system but also satisfies the discharge and pressure requirements at demanding nodes. The model has been applied to an imaginary and an existing pipe network systems. One system is adopted from journal papers which has been used as an example network by many other researchers. Comparison of the results shows compatibility of the model developed in this study. The model is also applied to a system in Goyang city in order to check the model applicability to finding of optimal pumping powers. It has been found that the developed model can be successfully applied to optimal design of pipe network systems in a relatively simple manner.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.4
• /
• pp.217-230
• /
• 2020

In a view of rapidly changing business environment, the success and competing power of organizations depend on committed, highly motivated and satisfied human resources. Empowerment is mainly concerned with establishing and building trust between management and employees, and motivating their participation. Also, behavioral integrity emphasizing on the characteristics of effective leaders has shown as direct action that strengthens positive consequences in organizations. However, research regarding behavioral integrity is very limited. Based on the Self-determination Theory, this paper investigates the effect of empowering leadership on employee's job satisfaction and work engagement. Multi-group analysis based on behavioral integrity is also analyzed. An online survey was conducted and 298 employees' data were collected. Using structural equation modeling, results suggest as follows. First, empowering leadership had a positive effect on individual's job satisfaction mediated by their work engagement. Second, the result of the multi-group analysis showed that the effect of empowering leadership on work engagement is stronger in the group with high behavioral integrity. Contrary to the prediction, the result doesn't support the moderating effect on job satisfaction. These findings contribute to our understanding of empowering leadership process. Based on the results, several theoretical and managerial implications are discussed.

• Journal of Korea Port Economic Association
• /
• v.29 no.3
• /
• pp.175-207
• /
• 2013

The purpose of this study is to examine the effects of the interdependent partnership between liner shipping companies and port-related service firms on the service quality and transaction performance. The empirical analysis found that sharing information and mutual trust of partnership factor positively affected service quality of the port-related service firms, but the communication had negative effects on it. The interdependence had the interaction effect between the partnership and the service quality. Also, the service quality affected satisfaction of transaction and re-purchasing of the shipping companies. This study shows that the partnership to be formed mutual dependent relationship between shipping companies and the port-related firms improve the service quality of shipping service network and enhance transactional satisfaction of both parties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1575-1583
• /
• 2008

Wireless sensor network has merit of low-power, low-cost and self-organization network, so there are many researches substituted for existing wire network. As structure reinforcement work need a high accuracy, many sensors are installed in structure and connected with data logger for monitoring. However this wire data logger method takes a long time to install wires and installed wires obstruct to work. Additionally, wire data logger method represent sensor data by only numeric and graph, it is not able to support a rapid decision-making for working. To resolve wiring problem and support decision-making, we designed and implemented the monitoring system based in wireless sensor network. For verifying performance, accuracy and availability, we simulated and tested our system in real field. Consequently, wireless sensor network method is easier to install and deploy than wire data logger method, user is able to monitor instinctively and overall by 3D representation of structure and sensors, and it show not only accuracy but also performance for many sensors.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.80-93
• /
• 2022

This study is a study on a methodology that can extract various factors that affect purchase and use of products/services from the consumer's point of view through previous studies, and analyze the types and tendencies of consumers according to age and gender. To this end, we quantify factors in terms of general personal propensity, consumption influence, consumption decision, etc. to check the consistency of data, and based on these studies, we conduct research to suggest and prove data analysis methodologies of consumer types that are meaningful from the perspectives of startups and SMEs. did As a result, it was confirmed through cross-validation that there is a correlation between the three main factors assumed for data analysis from the consumer's point of view, the general tendency, the general consumption tendency, and the factors influencing the consumption decision. verified. This study presented a data analysis methodology and a framework for consumer data analysis from the consumer's point of view. In the current data analysis trend, where digital infrastructure develops exponentially and seeks ways to project individual preferences, this data analysis perspective can be a valid insight.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.141-148
• /
• 2007

With the use of world geodetic system, the UIS DB of WonJu City, which was established on Korea coordinate system becomes to face the need of coordinates transformation. However, the UIS DB of Wonju City is based on dualistic control points of Korea geodetic system, which means the coordinates system is not standardized. Therefore it is required to establish a plan for transformation into world geodetic system. For this purpose, we calculated coordinate transformation coefficients per control point data of Korea geodetic system and verified the accuracy of transformation coefficients. Through the process, we propose a plan for transforming the coordinate system of UIS DB in WonJu City, which has been based on dualistic control point data of Korea geodetic system, efficiently into the world geodetic system.

• Korean Architects
• /
• no.5 s.433
• /
• pp.72-78
• /
• 2005

지난 몇 년간의 연구와 출간된 글, 그리고 디자인 스튜디오 등 일련의 실험과정을 '하우징의 가변성 - 디자인의 연구 및 적용'이란 하나의 주제로 묶어 연재한다. 근본적으로, 이 연구 및 실험은 두 가지 틀 속에 그 근간을 두고 있다. 첫째는 '이론과 실무'이고, 둘째는 '분석과 종합'이다. 건축 활동에 있어 이론과 실무는 불가분의 관계에 있다. 우리에게 흔히 '건축10서'라고 알려져 있고 현존 가장 오래된 건축 저서인 비트루비우스의 'De Architectura'의 첫 번째 책, 첫 장 '건축가의 교육에 관하여'에서 비트루비우스는 건축가의 이론과 실무능력의 겸비를 강조하고 있다. 건축 디자인을 함에 있어 구체적이고 체계화된 이론과 그 이론의 디자인으로의 적용을 통한 상호 보완관계를 강조한다. 즉 디자인 작업이란 연구, 분석, 실험 행위로 구성되는 연속 과정을 하나의 전체로 종합시켜 이루어지는 결정체이다. 따라서 건축 디자인은 그 근본이 되는 이론적 지식의 습득과 연구 그리고 디자인으로의 실험적인 적용 및 응용을 통한 상호 보완관계 위에서 전개, 발전되어야 한다. 따라서 디자인 작업이 '이론과 실무'의 상호 보완적인 작업이라는 전제하에 연재를 이어간다. 접근 방식으로는 '분석과 종합'의 변증법적인 통합에 기초한다. 건축 디자인의 형태적 체계를 인식하거나 구성하기 위한 방법으로 분석과 종합은 서로 불가분의 관계를 가진다. 여기서의 분석은 논리적인 사고나 원리에 근거한 디자인을 비교 검증하는 과정으로 해석하고 디자인에 나타나는 어떤 공통 특징을 인식하는 것이고, 이에 의거해 정련하고 개괄하여 새로운 디자인을 만들어가는 것이 종합이다. 즉, 건축가의 작품의 분석적 작업을 통해 이론과 원리를 추출하고, 이 원리들을 다양한 새로운 디자인으로의 적용 가능성을 디자인 스튜디오 작업을 통해 그 가능성을 타진해 보는 방법을 말한다.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.4
• /
• pp.55-62
• /
• 2012

In this application study, field pilot tests were performed to evaluate the validity of a proposed formula between the exerted electrical energy and SPT N-value based on the result of the basic study. Measurement sensors and recording system were developed to obtain exerted motor current and drilling depth in a field. By using the correlation formula proposed in the basic study, the measured motor current and boring speed were applied to predict SPT N-value and the predicted N-values were compared to SPT N-value of site exploration. From the comparisons it is verified that the exerted electrical energy to bore ground might be used to predict SPT N-value and pile tip location.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.7
• /
• pp.5-14
• /
• 2010

The paper processed settlement analysis using Finite Elements Method(FEM). Because Stress Distribution Ratio has to be decreased, for settlement analysis of soft clay deposit improved by sand compaction piles(SCP). Back analysis was processed comparing the measured settlements of laboratory model tests and finite element analysis where the SCP treated area was assumed as mixed ground with clay deposit rather than being a composite ground. The paper proposes a methodology which employs a compression index($C_c$) for settlement analysis of soft clay deposit improved by sand compaction piles from the back analysis. This approach is applied to a field measurement case(A revetment founded on the SCP improved clay deposit with the replacement ratio of 45%).

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.209-212
• /
• 2018

Anisotropic conductive film(ACF) bonding is widely used for making fine interconnections between two different materials where soldering is not easily applicable. There are three constraints for the successful implementation of ACF bonding. A bonding contact should be pressed by a hot head with the right pressure and temperature for a pre-defined curing time. In this paper, a method for ACF bonding based on machine vision system is proposed and verified through some experiments. The system calculates the position and orientation of printed circuit boards(PCBs) on a bonding table and estimates the optimal hitting point where the hot head should be applied. Experimental results show that the proposed system achieves better adhesive strength by providing head flatness over contact surfaces.