• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3736-3741
• /
• 2015

Crash impact test is conducted to verify the crashworthiness of fuel tank. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. The failure of crash impact test can result in serious delay of a entire rotorcraft development because of the design complement and re-production of the test specimens requiring a long-term preparation. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error in the real test. Present study conducts on the numerical simulation of phase I crash impact test using SPH supported by crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the crash load on the skin material, overlap area and metal fitting is estimated to confirm the possibility of acquisition of the design load for the determination of the overlap area and adhesive strength.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.6
• /
• pp.49-60
• /
• 2010

Cost Estimating allows each entity in a construction project to plan, distribute, and control its required construction cost for the project. However, existing 2D design based estimating has problems, such as inaccuracy and inefficiency caused by missing, duplicated, or erroneous calculations. In this situation, current estimations for school facilities have more difficulties in forecasting construction costs due to an inadequate work breakdown structure for BOQ (Bill of Quantity) and insufficient guidelines for Basis of Estimate. In this study, therefore, an effort was made to increase the efficiency of estimating for school facilities by applying a 3D modeling based BIM tool to quantity and cost estimates. In addition, this study suggested a reasonable work breakdown structure for BOQ that was appropriate when 3D modeling was applied, and verified it through a case study. The authors tried to provide a BIM-based estimating method for school facilities to obtain greater accuracy and efficiency by having more information in an earlier stage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.703-709
• /
• 2017

Korea Utility Helicopter(KUH) is a project to replace the aging helicopter presently being operated by the military with a domestic helicopter. The auxiliary power unit is a device that supplies emergency power to the system by an alternator installed when the main generator fails and the start motor converts the electrical energy of the battery into mechanical rotational energy to rotate the auxiliary power unit engine. With continuing power and operation, defects of the starting motor were found and improvements were carried out to solve it. In the failure mode analysis, the causes of possible defects were classified into 5 categories. Analysis of the 5 factors revealed that the main cause of defects is mechanical wear, which was found to be related to spring pressure. 250 tests were conducted through the theoretically determined pressure and regression analysis was performed with 4 sampling.The results showed that pressure was related to wear rate. In conclusion, early wear and breakage due to wear can be controlled through spring force and test showed the prediction of wear and the validity of the result were confirmed.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.10
• /
• pp.447-454
• /
• 2015

This paper proposes geographical name denoising by machine learning of event detection based on twitter. Recently, the increasing number of smart phone users are leading the growing user of SNS. Especially, the functions of short message (less than 140 words) and follow service make twitter has the power of conveying and diffusing the information more quickly. These characteristics and mobile optimised feature make twitter has fast information conveying speed, which can play a role of conveying disasters or events. Related research used the individuals of twitter user as the sensor of event detection to detect events that occur in reality. This research employed geographical name as the keyword by using the characteristic that an event occurs in a specific place. However, it ignored the denoising of relationship between geographical name and homograph, it became an important factor to lower the accuracy of event detection. In this paper, we used removing and forecasting, these two method to applied denoising technique. First after processing the filtering step by using noise related database building, we have determined the existence of geographical name by using the Naive Bayesian classification. Finally by using the experimental data, we earned the probability value of machine learning. On the basis of forecast technique which is proposed in this paper, the reliability of the need for denoising technique has turned out to be 89.6%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.533-541
• /
• 2021

Retaining walls have been used to prevent slope failure through resistance of earth pressure in railway, road, nuclear power plant, dam, and river infrastructure. To calculate dynamic earth pressure and determine the characteristics for seismic behavior, many researchers have analyzed the nonlinear response of ground and structure based on various numerical analyses (FLAC, PLAXIS, ABAQUS etc). In addition, seismic fragility evaluation is performed to ensure safety against earthquakes for structures. In this study, we used the FLAC2D program to understand the seismic response of the inverted T-type wall with a backfill slope, and evaluated seismic fragility based on relative horizontal displacements of the wall. Nonlinear site response analysis was performed for each site (S2 and S4) using the seven ground motions to calculate various seismic loadings reflecting site characteristics. The numerical model was validated based on other numerical models, experiment results, and generalized formula for dynamic active earth pressure. We also determined the damage state and damage index based on the height of retaining wall, and developed the seismic fragility curves. The damage probabilities of the retaining wall for the S4 site were computed to be larger than those for the S2 site.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.3
• /
• pp.27-38
• /
• 2019

Recently, domestic universities have emphasized career path to start-up through entrepreneurial self-efficacy (ESE) and entrepreneurship. The purpose of this study is to investigate the effect of ESE on entrepreneurship of university students. Also we examine the moderating effects of entrepreneurial education and career uncertainty between ESE and entrepreneurship. Research sample consisted of 236 university students in Cheonan city. The results of this research is as follows: First, ESE showed a positive effects on entrepreneurship. Second, the moderating effect of entrepreneurial education was significant on the relationship between ESE and entrepreneurship. In other words, university students with a higher entrepreneurial education showed higher entrepreneurship when ESE was lower. But students with a lower entrepreneurial education showed higher entrepreneurship when ESE was higher. Finally, the interaction effects of career uncertainty was confirmed in relationship between ESE and entrepreneurship. In other words, university students with a higher career uncertainty showed higher entrepreneurship when ESE was higher. But students with a lower career uncertainty showed higher entrepreneurship when ESE was lower. In order to improve the entrepreneurship of the pre-founders, it is necessary to strengthen the behavior control of university students by enhancing the ESE. Also, the improvement of entrepreneurship of pre-founders should strengthen the ESE of university students, and should complement systematic and effective entrepreneurship education. In particular, we should provide the stability for career decision by eliminating uncertainty about the career path of university students.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.991-999
• /
• 2018

In urban areas, the proportion of railway traffic in public transport is increasing. The congestion situation is repeated as the passengers concentrate on station and transfer facilities and the inconvenience of the passengers is increasing in terms of safety and convenience. Therefore, the importance of estimating the appropriate area of the station has been emphasized. The area estimation formula used in the metropolitan railway stations currently is a partial modification of the area estimation formula of Japan in the 1970s. It does not reflect changes in the social and cultural environment and patterns of passengers. The technical basis for major decision variables is insufficient. Therefore, the theoretical basis of the area estimation formula and the pedestrian environment satisfaction of the design guideline of metropolitan railway stations were analyzed in order to suggest improvement formula. The improved area estimation formula was verified by conducting field surveys on 5 stations of metropolitan railways and 15 stations of urban railways. The existing area estimation formula is LOS E grade for the main space. However, the LOS D grade is implemented when the improved area estimation formula is applied. Based on the results, the design factors for the area estimation formula are suggested.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.339-346
• /
• 2019

Purpose: In fact, to manage response and recovery successfully, although mitigation and preparedness should be accomplished naturally and automatically through thorough analysis and assessment, response, recovery, mitigation, and preparedness have not done in the way of virtuous cycles and continued broken disaster management repeatedly. Method: By Analysis through the critical methods, to enhance the community disaster resilience centered by social disaster management system in Korea, Result: (1) public training & education preparing for emergency or disaster (2) supplying public with disaster, or hazards information, and sharing at real time (3) networking emergency and disaster informational communication system & alarm system (4) analysis and assessment of risk(or disaster) in community (5) inter-governmental cooperative relationship and agreements (6) adopting and implementing disaster or hazards mitigation plan Conclusion: These will be able to be fully melt down into and specifically focused in the disaster policies in Korea for the better disaster management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.470-478
• /
• 2019

As the growth of the domestic defense industry is remarkable regarding technology level and export size, technology protection is necessary. Particularly, there is a need to apply anti-tamper measures to prevent critical technologies from illegally being taken out of weapon systems. However, there is no security protection strategy and system built yet in ROK. Precedent studies discussed the trend analysis and technical research for specific protective techniques, and the application of anti-tamper using limited procedures was provided. Recently, methods of how to select the technology for protection were studied based on risk management. Nonetheless, these studies cannot be associated with the acquisition process for the whole life-cycle, having difficulty with actual development and evaluation of the weapon systems. The objective of our study is to derive the system requirements of the weapon system for which anti-tamper measures have been determined to apply. Specifically, requirements items suitable for the development of anti-tamper weapon systems were derived based on ISO/IEC 19790, the CMVP standard for the development and verification of cryptographic modules. Also, its utilization in technical reviews and test & evaluations was presented. The usefulness of the research results was confirmed through inductive inference and comparative evaluation. The result can be expected to play a role in initiating extensive activities needed for technology protection of the weapon systems.

• Management & Information Systems Review
• /
• v.37 no.4
• /
• pp.63-74
• /
• 2018

Recently, in the asset management industry, the smart beta strategy, which has an intermediate nature between passive and active strategies, is attracting attention. In this smart beta strategy, value, momentum, low volatility, and quality index are widely used. In this study, we analyzed the quality index which is not clear and complicated to calculate. According to the MSCI methodology, the quality index was calculated using three variables: return on equity, debt to equity, and earnings variability. In addition, we use the index using only return on equity variable, the index using only two variables of return on equity and debt to equity, and the KOSPI index as comparison targets for the quality index. In order to evaluate the performance of the indices used in the analysis, the arithmetic mean return, the coefficient of variation, and the geometric mean return were used. In addition, Fama and French (1993) model, which is widely used in related studies, was used as a pricing model to test whether abnormal returns in each index are occurring. The results of the empirical analysis are as follows. First, in all period analysis, quality index was the best in terms of holding period returns. Second, the quality index performed best in the currency crisis and the global financial crisis. Third, abnormal returns were not found in all indices before the global financial crisis. Fourth, in the period after the global financial crisis, the quality index has the highest abnormal return.