• Fire Science and Engineering
• /
• v.29 no.5
• /
• pp.51-56
• /
• 2015

In this study, optimal design methods were applied to the agent discharge flow of clean agent fire extinguishing systems. The methods combined optimal design theory and engineering theory for engineering analysis in a design program or coast savings in value engineering. Optimal design parameters were determined to optimize the agent discharge flow based on the design theory of the clean agent fire extinguishing systems and the theory of optimal design. The design factors were verified in regard to suitability for the performance of fire extinguishing systems. The results provide a foundation for optimal design method methods in other fire extinguishing systems. Optimization of the agent discharge flow of the discharge nozzle was confirmed by the constraints on the inner diameter of the discharge nozzle and the pipe, agent arrival time, flow, and pressure variation of the agent. The deviation of discharge pressure and agent time of the agent discharge nozzle were found to correlate with the pressure variation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.250-254
• /
• 2005

국내의 상수원수 확보는 대부분을 표류수에 의존하고 있으나, 표류수의 경우 수질오염의 증가와 돌발 수질 오염 사고에 대한 대응 등의 취약점을 가지고 있다. 이러한 문제점을 해결하기 위해 근본적으로 깨끗한 상수원수를 확보하기 다양한 방법이 모색되어지고 있다. 수량적으로 안정적이고, 수질적으로 안전한 상수원수 취득 방법으로 강변여과수, 지하댐, 인공함양기법 등이 실질적으로 계획되어 시행되어지고 있다. 특히 강변 충적층의 자연정화 기능을 이용한 강변여과수 개발은 지하수 개발과 달리 수량적으로 안정적이고, 수질적으로 안전한 강변여과수 개발 방안이 적극적으로 진행되고 있다. 낙동강 하류 지역인 함안군, 창원시, 김해시 등은 대부분 하천 표류수에 의존하였으나, 유역내 충적층 발달 지역이 분포해 있고, 하상경사, 하상계수 등의 하천공학적 측면에서 강변여과수 개발에 유리한 입지조건을 가지고 있어 강변여과수 개발이 진행되고 있다. 현재 창원시 대산면 일대에서 국내최초로 방사형집수정을 이용한 강변여과수 개발이 진행되고 있으며, 현재 방사형 취수정 1기가 시공 완료되어 시험 가동 중에 있다. 본 연구에서는 창원시 대산면 일대에서 진행되고 있는 방사형 집수정 설치에 따른 양수시험을 실시하여 양수량에 따른 수위하강 겋항 등을 분석하여 적정 산출량을 결정하였고, 계획단계에서 적정 산출량 예상시 사용한 경험식(Petrovic, Milojevic 경험식)의 적합성 여부에 중점을 두어 진행 되었다. 연구대상 지역인 창원시 대산면 일대는 지하수위가 하천수위보다 높은 이득하천의 형태로 건기시 하천특성을 뚜렷하며, 양수실험을 위한 대용량 양수펌프 설치, 유량검증을 위한 대형 웨어 설치, 수위변화 측정을 위한 디지털 수위계 등을 설치하여 실험을 수행하였다. 단계/장기양수시험을 통하여 양수량-수위하강 경향을 분석하여 방사형 집수정 1기의 적정 양수량은 약 $16,000m^3/day$로 예상하였으며, 계획 시 사용한 경험식(Milojevic)으로 산정된 산출예상량과 유사한 특성을 나타내었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1122-1127
• /
• 2011

A bumper beam plays the important role of absorbing the bulk of bumper impact energy, so it is extremely important to determine the bumper beam section during the initial stage of car development process. This paper uses the Intermediate Response Surface Models (IRSM) technique for the bumper beam section optimization. By using this method, the nonlinear impact force-deflection curve is changed to an approximated curve. This can avoid the excessive 3D nonlinear FEM analysis during the optimization process. Then, the accuracy of the IRSM models is examined by comparing their results with those of the 3D nonlinear FEM. Finally it is shown that the proposed approach is effective to design the 2.5mph vehicle bumper section.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.486-489
• /
• 2002

Construction management has been a target of the result and the index which were decided by whether the resourecs(time, cost and progress...etc) were used. but this has been serious problems in time and cost because of the shortage of storage space, the incident, lowering of efficiency for works, working impossible of between work categories and the demage of finished products. Therefore I noticed that more correct and more objective establish of data collecting system was necessary. it was through the diversification of information for exchange and communication between the construction site and participants. DVR(Digital Video Recorder) and internet technology were suggested for a solution to this problem. the collected information by DVR was divided to 3 steps as how long it used and how much it processed for improving efficiency of using and storage of information. and then it was verified through applying to cases at construction site.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.82-89
• /
• 2007

AVR(Automatic Voltage Regulator) of exciter control system in AC generator controls voltage and current according to load and terminal voltage variations in order to remain at the bus voltage. The output characteristics of main generator is dependent on the control performance of AVR. This paper presents the PWM type exciter system with transient response compensator for robust control of load variations. Additional transient response compensator generates compensation signal for load variation. So the proposed excitation control system has fast dynamic response in transient period and can control terminal voltage constantly. The proposed method is verified by the computer simulation and experimental results in prototype generation system.

• The KIPS Transactions:PartD
• /
• v.14D no.1 s.111
• /
• pp.9-20
• /
• 2007

Groups of genes control the functioning of a cell by complex interactions. Such interactions of gene groups are tailed Gene Regulatory Networks(GRNs). Two previous data mining approaches, clustering and classification, have been used to analyze gene expression data. Though these mining tools are useful for determining membership of genes by homology, they don't identify the regulatory relationships among genes found in the same class of molecular actions. Furthermore, we need to understand the mechanism of how genes relate and how they regulate one another. In order to detect regulatory relationships among genes from time-series Microarray data, we propose a novel approach using frequent pattern mining and chain rules. In this approach, we propose a method for transforming gene expression data to make suitable for frequent pattern mining, and gene expression patterns we detected by applying the FP-growth algorithm. Next, we construct a gene regulatory network from frequent gene patterns using chain rules. Finally, we validate our proposed method through our experimental results, which are consistent with published results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.608-616
• /
• 1996

To propose the use of skipjack processing by-product(SPB) as a food material, the optimal condition for the production of the SPB hydrolysate through enzyme treatment was obtained using RSM(Response Surface Methodology). Among eight pretenses test, Pretense $P^{TM}$ was screened primarily on the aspect of production cost and taste of the product. The extent of autolysis accompanied by endogenous enzyme in the SPB was almost negligible as compared with that of Protense $P^{TM}$ treatment. The derived model equation was within the satisfiable range as indicated by coefficient of $determination(R^2=0.9460)$ and lack of fit(p>0.1) values. From the results of RSM and ridge analysis, the conditions favoring the higllest degree of hydrolysis were: PH 7.2, $51^{\circ}C,$ reaction time of 3.94 hr, substrate concentration of 33.3%, and enzym $e_strate ratio of 0.48%.48%.8%.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 1994

The flame speed correlation considering thermal-hydraulic phenomena under severe accidents is proposed and correction coefficients are defined. This correlation modifies the pressure dependency in Iijima-Takeno correlation and adds the steam suppression effects to it in the anticipated hydrogen and steam concentration ranges under severe accidents. The existing models of flame speed due to hydrogen combustion under severe accidents are based on the experiments which were performed merely at room temperature and atmospheric pressure. They have difficulty in predicting a accurate flame speed in a case of high temperature and pressure during severe accidents. Thus the flame structure is assumed as a prerequisite to the reliable determination of flame speed and theoretical model is developed. To examine the validity, flame speeds in various conditions calculated by this model are compared with those obtained by the calculation of the existing correlations of the codes such as improved HECTR and MAAP. Also the steam suppression ratio is quantified and the steam suppression coefficient is defined as a composition of mixture. Initial temperature and pressure dependencies are investigated and correction coefficents are determined. More experimental studies can be recommended to improve this correlation to its further works.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2481-2486
• /
• 2013

It requires a lot of time and effort for general users who do not have enough understanding of GPS to properly processing GPS data. However, the GPS data processing field heavily relies on foreign-produced software and there is almost no development of user-oriented technology. Therefore, in this study, it was attempted to build an expert service that enables non-experts to use high-precision GPS data processing. As a result, an expert service that can maximize user convenience simply by entering the minimum required information for GPS data processing was developed, and the expert service was verified by relative positioning processing of the observation data of satellite control point provided by National Geographic Information Institute and observation data obtained by GPS survey. The expert service significantly reduces the effort and time for processing GPS data, which will contribute to precise positioning and other various studies.

• Journal of KIISE:Software and Applications
• /
• v.36 no.11
• /
• pp.891-900
• /
• 2009

The priority of software maintenance researches has been increasing, since the lengths of software lifecycle are more increasing. Measuring couplings among software entities provides a good quantitative source for analyzing source code and point out candidate refactoring positions. Logical-coupling measures how strongly two software entities are related with each other from the evolutionary point of view. The researches on logical-coupling have been focusing on improving the correctness and explaining more aspects that are hiding by measuring logical-coupling among finer-grained entities. However, existing researches on logical-coupling fails to consider characteristics of developers and projects reflected in transactions. The research proposes a logical-coupling measurement method based on transaction time, size and expertise of developer to improve the correctness by considering characteristics of developers and projects reflected in transactions. The method has been validated by applying it to three open-source projects.