• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.295-300
• /
• 1999

액상의 Ga으로부터 공급되느 기체상태의 Ga과 $NH _3$를 $1050~1150^{\circ}C$의 온도범위에서 직접 반응시켜 사파이어 기판위에 직경이 5~27$\mu\textrm{m}$이고, 높이가 $2~27\mu\textrm{m}$인 육각기둥 형태의 GaN 결정을 성장하였다. GaN 결정의 성장 초기에는 c-축 방향으로 우선 성장된 후 성장시간과 성장온도 및 $NH_3$의 유량이 증가함에 따라 기체상태의 Ga공급이 제한됨으로써 성장률이 둔화됨과 동시에 $\alpha$-축 방향으로 우선 성장되었다. GaN 결정의 크기가 증가함에 따라 결정의 품질이 개선되어 X-선 회절강도와 중성도너에 구속된 엑시톤 관력 발광밴드 (I\ulcorner)의 강도가 증가하고, I\ulcorner 발광밴드의 반치폭이 감소하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.32-34
• /
• 2015

AlN Single Crystal were grown by PVT (Physical vapor transport) method on bulk seed. It was performed by high-frequency induction-heating coil. AlN source powder was loaded at bottom side of the carbon crucible and the crystal seed was loaded at the upper side of the crucible. The temperature conditions of the growth was varied $2000{\sim}2100^{\circ}C$ and the surrounding pressure was $1{\times}10^{-1}{\sim}200$ Torr. And the hot-zone of the heating position was controlled elaborately according to growth. The 17 mm-diameter, 7 mm-thickness AlN single crystal is obtained for about 600 hours growing. It was recognized that the growth direction of as grown crystal was R[011] by the Laue X-Ray camera measurement.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.6-13
• /
• 1999

NaX zeolite crystal were grown from seed elements of synthetic NaX(2~3$\mu\textrm{m}$) Powder in a mother liquor having an approximate reactant composition ${4.12{Na}_{2}O{\cdot}{Al}_{2}{O}_{3}{\cdot}3.5{SiO}_{2}{\cdot}593{H}_{2}O$.The result was that crystallization time of NaX zeolite was reduced with adding seed materials to the initial mixture and crystal size was reduced . but with increasing crystallization time, NaX zeolite. In this study, We investigated detailed factors which NaX crystal has been determined by a combination of SEM, XRD, FT-IR, and BET.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.23-30
• /
• 1992

a-SiC crystals were grown on the (001) plane of a-SiC seed crystals by sublimation method to find effects of pressure-reduction rate of the crystal growth furnace own the growth rate and orientstion of grown SiC crystals. Pressure-reduction rate at the initial growth stage affected the crystallinity of grown SiC crystals. In case of high pressure-reduction rate, growth rate was high and 3csic polycrystalline was grown on the seed. On the other hand, low pressure-reduction rate caused the growth rate to be slow and 6H-SiC single crystal was grown on the seed. However, even after growing SiC for 2 hours under the condition in which.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.96-106
• /
• 1998

수평 전기로에서 AgInS2 다결정을 합성하여 HWE 방법으로 AgInS2 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. AgInS2 단결정 박막은 증발원과 기판의 온도를 각각 680℃, 410℃로 성장하였다. 이때 단결정 박막의 결정성이 10 K에서 측정한 광발광 스펙트럼은 597.8 nm(2.0741 eV) 근처에서 엑시톤 방출 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)도 121 arcsec로 가장 작게 측정되어 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 9.35×1023개/㎥, 2.94×10-2㎡/V·s였다. AgInS2 단결정 박막의 광전류 단파장대 봉우리들로부터 10 K에서 측정된 ΔCr(crystal field splitting)은 0.15eV, ΔSo(spin orbit coupling)는 0.0089 eV였다. 광전도 셀로서 응용성을 알아보기 위해 감도(γ), pc/dc(photocurrent/darkcurrent), 최대허용소비전력(maximum allowable power dissipation: MAPD), 응답시간(response time)등을 측정한 결과, S 증기 분위기에 열처리한 광전도 셀의 경우 γ=0.98, pc/dc=1.02×106, MAPD=312 mW, 오름시간(rise time)=10.4 ms, 내림시간(decay time)=10.8 ms로 가장 좋은 특성을 얻었다.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.20-29
• /
• 2006

This study was carried out for to recover the purified crystalline gypsum from phosphogypsum by means of using it's crystallographical Properties. The dehydration of hydrated phosphogypsum to $\alpha$-hemihydrate is completed with the 2 hours treatment of it in $99^{\circ}C$ waterrs. The purified crystalline gypsum having the maximum size of $200{\mu}m$ was obtained by 325# wet screening after recrystallization of the $\alpha$-hemihydrate gypsum at the condition of $Na_2SO_4$ 10 wt%, slurry density 20%, $pH\;5{\sim}6,\;65^{\circ}C$ and 4hr. In this process, the yield of gypsum was 93.9% and its grade was 99%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.255-262
• /
• 1998

This study investigated the crystallization behaviour of sealing amorphous material heat-treated by conventional and microwave heating source. From X-ray diffraction and SEM analyses, it was shown that microwave heat-treated sample had well-grown $PbTiO_3$crystals and the high degree of crystallinity inspite of its heat-treated condition of shorten time and lower temperature as compared with a conventionally heat-treated sample. It was assumed that microwaves inhibit the nucleation of $PbTiO_3$crystal in nucleation stage, but promote the growth of $PbTiO_3$crystal above the critical size of crystal due to enhanced diffusion effect within the sample.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.250-260
• /
• 1995

In general, a sintered rod is used as a feed in the growth of crystals by the floating zone(FZ) method. The sintering condition of the feed rod affected the stability of molten zone because it influenced the interface shape between the feed and the melt during the crystal growth. In this study, rutile and ruby crystals were chosen as samples to analyze the effect of the microstructures of the feed rods. In sintering of the feed rod for the growth of rutile and ruby single crystals, the difference of grain size between the inner and the outer region of the feed rod increased with the sintering temperature and dwelling time. As a result, it altered melting behavior of the feed. The uniform grain size of the sintered rod was necessary for the optimum growing condition of crystals. The effect of pores in the feed rod was not a dominant factor to grow crystals by the FZ method, which was confirmed by growing crystals with nonsinterd rods as feeds.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.229-237
• /
• 1998

We grew the hexagonal GaN films on (100) Si and (00.1) sapphire substrates in the temperature range of $300~730^{\circ}C$ by the direct reaction between thermally ionized N-source and thermally evaporated Ga-source. The GaN growth rates are increased at the initial stage of GaN formation and it was saturated to some values by the coalescence of each crystallites. The oxygen signal was observed in XPS spectra for all the GaN films grown in this work, especially low- temperature grown GaN film may due to incorporation of the residual oxygen in the growth chamber. The surface of low-temperature and shorter time grown films covered only Ga-droplets. however, with increasing the both substrate temperature and the growth time GaN is growth to crystallites. and coalescence to ring-type crystallites. With sufficient supply of N-source, they were changed to platelets. In the PL spectrum measured at 20 K, we observed the impurity related emission at 3.32eV and 3.38eV.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.69-74
• /
• 1997

MCFC(Molten Carbonate Fuel Cell) Ni anode의 기계적 특성을 개선시키기 위해서 Ni-W복합재료를 기계적 합금법으로 제조하였다. 기계적 합금화한 분말을 XRD, SEM으로 관찰한 후 두께 1mm, 직경 8mm의 원반형으로 성형하였다. 소결은 120$0^{\circ}C$의 수소 분위기내에서 10시간 행하였다. 이렇게 제조한 시편의 절단된 면을 연마하여 SEM 및 EDX로 관찰하였으며 XRD로써 성분분석 하였다. 기계적 합금화 시간이 증가함에 따라 불충격에 의한 결정립 미세화가 이루어졌으며 80시간 기계적 합금시 재료의 규칙적인 결정이 파괴되어 비결정질화 되었다. 기계적합금으로 Ni 기지내에 균일하게 분포된 W은 분산강화효과를 통해 Ni anode의 기계적 특성을 개선시킬 것으로 기대된다.