• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.864-873
• /
• 1995

Amorphous $Fe_{73.5}Cu_{1}Nb_{3}Si_{16.5}B_{6}$ ribbons were annealed for different time at $500^{\circ}C$ and $552^{\circ}C$, just before and after the exothermic reaction in DSC curve. The development of nanocrystalline phase was investigated by means of $M\"{o}ssbsuer$ spectroscopy. The crystalline phase consists mainly of $DO_{3}Fe-Si$. Though slight in amount (5%), another ferromagnetic phase which could be presumed $t-Fe_{3}B$ was detected Si content of $DO_{3}Fe-Si$, Si/(Fe+Si), was 0.218 under the heat treatment at $500^{\circ}C$ for 60 min and 0.222 at $552^{\circ}C$ for 10 min. Since then both of those values decreased with time until 120 min and finally these two values remained constant at 0.210. The variation in Si content with annealing time results in the variation in the hyperfine field and the isomer shift. The increase in the mean hyperfine fields and the decrease in the mean isomer shifts of Fe-Si are caused by the increase in Si content. The volume fractions of residual amorphous phase rapidly decrease during the early stage of annealing and come nearer to saturation after 120 min both at $500^{\circ}C$ and $552^{\circ}C$. The decrease in the mean hyperfine field of residual amorphous. in spite of slight changes in the volume fractions of Fe-Si and of residual amorphous after 120 min. is caused by the increase in the content of Nb and B in residual amorphous phase. The saturated volume fraction of the crystalline phase was 81% for $500^{\circ}C$ (180 min) and 77% for $552^{\circ}C$ (960 min), different from expectation.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.90-98
• /
• 1996

Mn((Cu0.66AI0.34)1-x(Bi0.3Sb0.7)x) 및 Mn((Fe0.66AI0.34)1-x(Bi0.3Sb0.7)x) 합금계의 상의 변화와 자기적 특성을 조사하였다. Mn((Cu, SI)(Bi, Sb)) 합금계는 Bi상, MnSb상, MnBi상, k-상, Heuser상, Mn2Sb 및 $\beta$-Mn상의 혼합상으로 이루어졌으며 x가 증가함에 따라 Bi상과 Mn2Sb상이 증가하고 K-상, Heusler상 및 $\beta$-Mn상이 줄어들거나 사라졌다. 자기적 성질은 자성을 띄는 MnSb상, MnBi상, Mn2Sb상, k-상 및 Hseusler상과 비자성인 Bi상과 $\beta$-Mn상의 상대적 분율에 의해 결정됨을 알 수 있었고, 150K-200K 부근에서 그 이하로 온도가 감소함에 따라 자화값이 급격히 감소하는 현상이 나타났다. Mn((Fe, AI)(Bi, Sb))합금계는 Bi상, MnSb상, MnBi상, MnBi상,$\beta$-Mn상, k-상 및 Mn2Sb상의 혼합상으로 나타났으며, 자기적 성질은 조사한 전 조성에서 강자성을 띄고 있음을 알 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.41 no.5
• /
• pp.234-238
• /
• 1997

The photochemical reaction of ammonia in deoxygenated aqueous methanol has been investigated at 25$^{\circ}C$ using 184.9 nm UV light. Amination was carried out by irradiating the solution of reaction mixture, and the formation of methoxyamine, hexamine, 1,1-dimethylhydrazine, dimethylamine, formamide, and a small amount of ethylenediamine was observed. In addition to these, carbonyl compounds such as formaldehyde, ethyleneglycol, glyoxal, and hydrazine were also produced. The initial quantum yields of the products were determined and probable mechanisms for the photochemical reaction were presented on the basis of product analysis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.90-100
• /
• 1994

Ultrasonic velocities are widely used in the investigation of material properties. In this paper, a micromechanics model and the ultrasonic velocity were used to develop a nondestructive method to determine the density variation due to porosity in structural SiC. The micromechanics model developed can consider the pore shape and orientation. The model also takes into account the interaction between pores so that it can be applied to the material with high porosity content. A contact pulse overlap method was used to measure the ultrasonic velocities of porous SiC samples, and there was a linear correlation between the velocity and density (or porosity). Using the model and the measured velocity, the bulk density can be easily calculated. The calculated density was in good agreement with that obtained by Archimedes' method.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.204-205
• /
• 2003

Nano 결정립 N $d_2$F $e_{l4}$B+F $e_3$B 복합상 자성 리본은 Extractive melt spinner의 wheel speed를 달리하여 제조하였다. 초기 조성은 N $d_4$F $e_{77.5}$ $B_{18.5}$이고, 이후 제조한 자성 리본의 자기특성은 VSM 및 AGM(Alternating gradient magnetometer)으로 측정하였다. wheel speed 1500rpm, $650^{\circ}C$에서 10분간 열처리한 자성 리본에서 $B_{r}$ = 11.73 kG, $_{i}$ $H_{c}$ = 3.082 kOe, (BH)$_{max}$ = 12.28 MGOe의 자기특성이 나타났다. 이러한 자기특성 원인 규명을 위해 $\delta$M plot과 뫼스바우어 분광학을 사용하였다. $\delta$M plot을 통해 exchange coupling은 초미세립 복합상의 잔류자속밀도에 큰 영향을 미치는 것으로 판단된다. 또한, 뫼스바우어 분광학을 통해 경자성상(N $d_2$F $e_{l4}$B)과 연자성상 F $e_3$B의 부피분율비가 7:3 정도일 때 가장 최적의 자기특성을 발현하였다. 이 경우에 초미세립 복합상의 상호작용력이 가장 크게 발현하는 것으로 판단된다.단된다..된다..된다..

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.601-605
• /
• 1999

$LiCoO_2$and $LiCo_{1-x}$$Ni_x$$O_2$ solid solutions were fabricated by the solid state reaction process. The structural cation mixing phenomena were investigated using XRD, SEM, particle size analysis and $^7$Li NMR,The synthesized LiCoO$_2$ and $LiCo_{1-x}Ni_XO_2$ microcrystallines showed the hexagonal layered structures. Mean particle sizes were increased with the increase of the amount of nickel in the solid solutions. The cation mixing effects were increased as increasing the fraction of nickel(x), x = 0.3, 0.5, 0.7. the peak frequency of $^7$Li NMR was shifted to the higher frequency and the line width increased as increasing the amount of nickel in the solid solutions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.83-89
• /
• 2004

In this work, HA/$TiO_2$ biocomposite to get high mechanical properties with biocompatibility were prepared. HA/$TiO_2$ biocomposite powders were prepared by mixing $TiO_2$ and HA powders which were synthesized through sol-gel, precipitation and hydrothermal methods. The mixing ratio was fixed at 1:1 ratio (HA/$TiO_2$, wt%). HA/$TiO_2$ biocomposite powders showed different microstructures depending on their particle size and shape. The smaller particles were coated on the surface of larger particles, whereas they were well mixed and dispersed when both $TiO_2$ and HA were nanocrystallites. HA/$TiO_2$ biocomposite powders with homogeneous microstructure showed high sintered density and good mechanical properties.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.143-150
• /
• 1997

The electrical properties of polysilicon thin films implanted with $B_2H_6$ diluted in $H_2$ as dopant source using ion mass doping technique and the effect of radiation damage on the dopant activation behavior were investigated. Comparing the SIMS profiles of boron in polysilicon films with that obtained from computer simulation using TRIM92 the most probable ion species were $B_2H_x\;^+$(x＝1, 2, 3‥‥) type molecular ions. As a result of the Implantation of energetic massive ions, a continuous amorphized layer was created in polysilicon films where the fraction of amorphized layer varied with doping time. This amorphization comes from the fact that mass separation of implanting species is not employed in this ion mass doping technique. In the dopant activation behavior, reverse annealing phenomenon appeared in the intermediate annealing temperature range for a severely damaged specimen. The experimental result showed that the off-state current of the p-channel polysilicon thin film transistor is dependent on the degree of radiation damage.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.642-647
• /
• 2000

Nanocrystalline NiAl alloy containing 36at.%Al was synthesized by mechanical alloying (MA). Synthesized powder was sintered by a pulse electric current sintering (PECS) facility. Effecting parameters on the phase transformation were discussed in terms of cooling rate and time spent on heat treatment. The behavior of phase transformation for sintered parts was examined by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) method. Microstructure was observed by scanning electron microscopy (SEM). Martensitic lattice parameter and volume fraction was calculated by direct comparison method in X-ray diffraction analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.237-248
• /
• 2005

Results from in-situ high temperature X-ray diffraction measurements show that $Mg_{2}SiO_{4}{-}$spinel converts back to olivine phase only when heated in vacuum, and that at some high temperature, the olivine phase grows with time at the expense of the spinel phase strongly suggesting a 'nucleation and growth' type transition. In order to obtain the activation energy of spinel-olivine back transformation, kinetics measurements were performed on $Mg_{2}SiO_{4}{-}$spinel in vacuum at high temperatures between 1023 and 1116 K. Activation energy was determined using 'time to a given fraction method'. By employing the Avrami equation, it was found that n values generally increase with increasing temperature in a wide range implying that the nucleation and growth mechanism is probably temperature-dependent. It is likely that in spinel, at a relatively lower transformation temperature, after nucleation sites saturated, the growth of the new phase starts on the surface and gradually moves inwards. At high temperatures, however, after nucleation sites saturated, the growth starts both on the surface as well as at the interior.