• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.5
• /
• pp.249-255
• /
• 2017

Using a magnetic separation process, pond ash generated in thermoelectric power plants was separated into magnetic materials and nonmagnetic materials in order to make it into a raw material of geopolymers and unburned carbon; screening characteristics according to the particle sizes and magnet strength levels of the pond ash were observed. Based on the results of magnetic separation into fine particle (0.15~0.84 mm) and rough particle (0.84~2.4 mm) pond ash using 3000 G magnets, the weight fraction and ignition loss of nonmagnetic materials were found to be higher than those of magnetic materials, regardless of the particle size. In the case of fine particle pond ash, when the magnet strength was increased from 3000 G to 10000 G, even those materials that were weakly magnetic were separated into magnetic materials, leading to drastic increases in the weight fraction of magnetic materials, such that the ignition loss accounted for 66.9 % (22.8 wt%) of the entire ignition loss of 32.6 wt%, despite of the low ignition loss. Based on the results of measurement of the compressive strength levels of geopolymers made of magnetic-separated rough particle pond ash, the compressive strength of geopolymers made of magnetic materials containing small amounts of unburned carbon was found to be 20 MPa.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.25-32
• /
• 2009

The glass-ceramics composed of coal bottom ash produced from a thermal power plant, $Na_{2}O$ and $Li_{2}O$ as a flux agent and $TiO_2$ as a nucleation agent were fabricated and its microstructures were analyzed. The nepheline was a major crystal phase in the glass-ceramics fabricated and its amount increased with $TiO_2$ addition. The glass-ceramics without $TiO_2$ addition had the thick surface crystals induced by a surface-crystallization mechanism and no crystal in the interior matrix. The surface crystallization, however, was restrained and the interior matrix was completely crystallized showing dendrite shape spread with fine particles < $1{\mu}m$ when added with $TiO_2$ above 4 wt%. For the glass-ceramics containing 6 wt% $TiO_2$, the $5{\mu}m$-long dendrite crystal; were interlocked each other which could suppress the crack propagation effectively at the external loading applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.86-93
• /
• 2018

This study examines the differences in the determinants of dividend payout across advance disclosure firms and ordinary disclosure firms using firm-level data from firms listed on the Korea Exchange. Results are as follows: First, firm characteristics of advance disclosure firms significantly differ from those of ordinary disclosure firms in all variables except sales growth and operating risk variables. Second, regression results show that the determinants of dividend payout from ordinary disclosure firms are generally similar to results of previous studies. However, determinants of advance disclosure firms contain only few variables such as Tobin's Q, corporate bond yield, and operating cash flows from conventional factors. Third, logistic regression results show that factors affecting the probability of dividend payment substantially differ across advance disclosure firms and ordinary disclosure firms. These results suggest that the motivation and incentive of dividend payout from firms choosing advance disclosure are substantially and systematically different from those of ordinary disclosure firms.

• Korean Journal of Materials Research
• /
• v.6 no.3
• /
• pp.324-332
• /
• 1996

DLC 박막을 RF 플라즈마 화학증착법(PECVD)을 이용하여 CH4와 CO2기체로부터 합성하였다. 증착압력, CH4와 CO2가스의 조성비, 바이어스 전압(-VB) 등의 증착조건 변화에 따른 증착속도는 증착층의 두께를 알파스텝으로 측정하여 결정하였으며, 박막의 구조 변화에 따른 증착속도는 증착층의 두께를 알파스텝으로 측정하여 결정하였으며, 박막의 구조 변화는 FTIR 분광분석을 이용하여 분석을 행하였다. 이 연구로부터 얻은 실험 결과는 다음과 같다: 1) 증착속도는 증착압력 및 바이어스 전압의 증가에 따라 증가한다. 2)바이어스 전압 300V이상에서, CO2량 증가는 순증착속도를 증가 시킨다. 3) 순수한 CH4가스를 사용할 경우에는 바이어스전압(-VB)이 증가함에 따라 박막내 수소의 함량과 sp3/sp2비는 감소하는 경향을 나타낸다. 4)증착압력이 증가함에 따라 박막내 수소함량은 증가하며, sp3/sp2비는 감소한다. 5)50mTorr의 증착압력에 증착시, CH4-+Co2 혼합가스에서 이산화탄소의 부피분율에 따라서는 박막내 수소함량은 감소하며, sp3/sp2비는 증가한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.227-232
• /
• 1998

Diamond crystallization and discontinuous deposit phenomena depend on the process of hydrocarbon deposition, nucleation and growth. Then, it is investigated the concentration of methane, flow rate, structure and the growth process of $CH_4-H_2$ system in hot filament assisted C.V.D. There is a limited value of temperature, pressure, flow rate and the mole fraction of methane-hydrogen gas. Diamond nucleation occurs on substrate selectively and surface diffusion of species on the substrate plays an important role in the early stages of nucleation and growth.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.250-260
• /
• 1995

스크류 압출기로 제조한 poly(ether ether ketone) (PEEK)과 p-hydroxy benzoic acid/poly(ethylene tere-phthalate) (HBA/PET)의 공중합체인 열방성 액정 고분자의 블렌드 를 전조성에 대하여시차 주사 열분석기 (DSC)와 주사전자현미경(SEM)을 이용하여 연구하 였다. 측정된 유리전이 온도와 유리전이 온도에서의 열용량 증가분으로부터 PEEK가 액정고 분자에 녹아들어가는 양보다 액정 고분자가 PEEK에 녹아들어가는 양이 더 많음을 알수 있 었다. 고분자-고분자상호작용계수($\chi$12)값은 35$0^{\circ}C$에서 0.069$\pm$0.004이었고, 짝상에서 액정고 분자의 degree of disorder는 PEEK의 질량분율이 증가함에 따라 증가하였다. 블렌드에서 PEEK의 결정화에 액정 고분자는 거의 영향을 주지않았고 액정 고분자의 결정화 역시 PE 따에 영향을 받지 않았다. 모폴로지연구에서는 액정 고분자를 PEEK에 10%첨가시에 PEEK 의 메트릭스상에서 액정 고분자가 신장된 타원형을 형성하였으며 액정 고분자를 20% 첨가 시에는 액정 고분자가 섬유상구조를 가지고 있었다.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.34-40
• /
• 1993

Nylon 6 based magnetic pellets for injection molding were produced using plasma arc melt-spun $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ powders. Two sorts of bonded magnets made of two different sizes of particles ($38~75\;\mu\textrm{m}$ and $75~150\;\mu\textrm{m}$) were prepared to determine critical volume fraction of magnet powders, and the magnetic prop erties of the magnets were discussed as a function of density. For the nylon fi based Nd-Fe-Co-Zr-B pellets made of $38~75\;\mu\textrm{m}$ particles, the critical volume fraction of powders 0.7 was obtained with the pellet density which is 90% of theoretical density while the magnets of $75~150\;\mu\textrm{m}$ showed the density of 87% of the theoretical value with the same volume fraction. The nylon (i magnets with the addition of 0.5 wt. % silicon oil only exhibited the best magnetic properties to have $_{i}H_{c}=8.8\;kOe,\;B_{r}=5.1\;kG$ and $(BH)_{max}=5.2\;MGOe$ which are of world class. An empirical relationship in predicting the magnet density with a known fraction ($V_s$) of loading powders was obtained such as ${\rho}(g/cm^{3})=1.1+K.V_{s}$ where the K ranges over 5.3~5.6 be ing dependent upon the particle size loaded.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.336-344
• /
• 2011

Organophilic ZSM-5 membrane was synthesized on the inside of a porous stainless steel support by a hydrothermal secondary growth with seed crystals. They are used to separate n-butanol from its aqueous solution. Pervaporation characteristics such as a permeation flux and a separation factor are investigated as a function of the feed concentration and the operating temperature. The concentration of n-butanol was changed from 0.001 mole fraction to 0.015 mole fraction with an interval of 0.005 mole fraction; the operating temperature was controlled to be 25C, $35^{\circ}C$ and $45^{\circ}C$. When the operating temperature was $45^{\circ}C$, the flux of n-butanol significantly increased from 2 to $27g/m^2/hr$ as the mole fraction of n-butanol in the feed side increased from 0.001 to 0.015. Consequently, the concentration of n-butanol in the permeate substantially increased from 0.0016 to 0.052 mole fraction. When the feed concentration was 0.015, the flux of n-butanol significantly increased from 13 to $27g/m^2/hr$ as the operating temperature increased from $25^{\circ}C$ to $45^{\circ}C$. As a result, the concentration of n-butanol in the permeate also increased from 0.045 to 0.052 mole fraction.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.43-43
• /
• 2009

단련용 다결정 Ni기 초내열합금은 우수한 가공성, 내산화성, 고온특성 등으로 가스터빈 연소기, 디스크, 증기발생기 전열관 등 발전용 고온부품 소재에 널리 적용되고 있다. 최근 발전설비의 고효율화를 꾀하기 위해 작동 온도를 현격히 증가시키는 기술방향으로 발전하고 있고, 소재측면에서는 기존의 초내열합금 대비 고기능성을 확보할 수 있는 차세대 Ni기 초내열합금 개발이 유럽, 미국, 일본, 중국 등을 중심으로 활발히 이루어지고 있다. 이러한 소재의 고온강도 (온도수용성)를 향상시키기 위해서는 통상 규칙격자 금속간화합물인 $Ni_3(Al,Ti)-{\gamma}'$상의 분율을 증가시킬 수 있지만, ${\gamma}'$상분율이 증가할 경우 용접 및 후열처리 동안 용접열영향부 (HAZ)에서 액화균열이 발생할 가능성이 높아진다. 결정립계를 따라 발생하는 HAZ 액화균열은 입계특성에 의해 크게 영향을 받을 것으로 판단된다. 한편, 본 연구자들은 최근 입계 serration 현상을 단련용 합금에 도입시키는 특별한 열처리를 이론적 접근법을 통해 개발하였다. 형성된 파형입계는 결정학적인 관점에서 조밀 {111} 입계면을 갖도록 분해 (dissociation)되어 낮은 계면에너지를 갖게 됨을 확인하였으며, 입계형상 변화뿐만 아니라 탄화물 특성변화까지 유도하여 크리프 수명을 기존대비 약 40% 정도 향상시킴을 확인하였다. 이러한 직선형 입계 대비 'special boundary'로 간주되는 파형입계가 도입될 경우, HAZ 결정립크기 변화 및 액화거동에 미치는 영향을 고찰하고, 아울러 입계특성 제어가 용접성/용접부 품질 향상에 기여할 수 있는 가능성도 토의하고자 하였다. 본 연구에서는 재현 HAZ 열사이클 시험을 통해 미세구조를 정량적으로 비교하였다. 상대적으로 입계구조가 안정된 파형입계의 이동속도가 高계면 에너지를 갖는 직선형 입계보다 느려 HAZ 결정립 성장이 효과적으로 억제됨을 확인할 수 있었다. 입계 액화거동을 살펴보면, 두 시편 모두 $M_{23}C_6$, MC 등 입계탄화물 계면이 빠른 승온중 액화반응 (constitutional liquation)에 의해 입계가 액화되었으며, 이후 급냉에 의해 입계에 액상막이 존재한 흔적이 발견되었다. 최고온도별로 입계액화 폭/비율을 정량적으로 비교한 결과, 파형입계가 직선입계 대비 대체로 낮음을 확인할 수 있었으며, 때때로 액화되지 않고 잔존하는 입계 탄화물이 관찰되었다. 재현 HAZ 미세조직을 통해 Hot ductility 시험 결과를 유추하자면, 파형입계가 직선입계 보다 좁은 취성온도영역 (Brittle Temperature Range)을 나타낼 것으로 예상되어, 입계특성제어에 의해 Ni기 초내열합금의 용접성을 향상 가능성을 확인하였다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.880-894
• /
• 1995

Magnetic properties of $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{90-x}B_{6}Nb_{3}Cu_{1}(x=\;3,\;4,\;5)$ rrelt-spun alloys with 6 at% B content were studied aiming for finding out a new $\alpha$-Fe based Nd-Fe-B nanocrystalline alloy with good hard magnetic properties. $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{90-x}B_{6}Nb_{3}Cu_{1}$ melt-spun alloys prepared by RSP crystallized to nanocrystalline phase. An optimally annealed $Nd_{3}{(Fe_{0.9}Co_{0.1})}_{87}B_{6}Nb_{3}Cu_{1}$ melt-spun alloys had larger volume ratio of $\alpha$-Fe(Co) than that of higher Nd content alloy and showed high remanence of about 1.6 T. On the contrary, the increase of Nd content in $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{90-x}B_{6}Nb_{3}Cu_{1}$ alloys gave rise to gradual increase of an amount of $Nd_{2}{(Fe,\;Co)}_{14}B$ phase and improved coercivity. An optimally annealed $Nd_{5}{(Fe_{0.9}Co_{0.1})}_{85}B_{6}Nb_{3}Cu_{1}$ alloy showed the most improved hard mag¬netic properties. The remanence, coercivityand energy product of the alloy were 1.35 T, 219 kA/m (2.75 kOe), and $129\;kJ/m^{3}$ (16.2 MGOe), respectively.