Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.244-244
/
2010
최근 활발히 연구되고 있는 AMOLED는 평판 디스플레이 분야를 이끌어 갈 차세대 선두 주자로 크게 주목 받고 있다. AMOLED는 전압 구동 방식인 AMLCD와 다르게 전류 구동 방식으로 a-Si TFT 보다 LTPS-TFT 사용이 요구되며, 대면적 기판으로 갈수록 결정립의 균일도가 매우 중요한 인자로 작용한다. 현재 양산이 가능한 AMOLED는 핸드폰이나 15인치 TV정도로 크기가 소형이며 대형 TV나 컴퓨터 모니터 등을 양산하기 위해 많은 방법이 시도되고 있다. 양산체제에서 사용되는 결정화 방법으로는 ELC가 가장 많은 부분을 차지하고 있다. 그러나 레이저를 사용하는 ELC 방법은 대면적으로 갈수록 레이저 빔 자체의 불균일성, shot to shot 불균일성, 레이저빔 중첩의 부정확도 등으로 인한 균일도의 부정확성이 커짐으로 인한 mura 현상이 나타나고 레이저 장비의 사용에 대한 비용 부담을 피할 수 없다. 따라서 non-laser 방식에 결정화 방법이 요구되나 SPC 경우는 상대적으로 고온에서 장시간이 걸리고, MIC 뿐만 아니라 MIC 응용 방법들은 금속 오염에 대한 문제가 발생하고 있는 실정이다. 이러한 문제로 인하여 결정립 크기의 균일도가 우수한 다결정 실리콘 박막을 제조하는 신기술에 대한 필요성이 매우 높은 실정이다. 본 연구에서는 비정질 실리콘 박막 상부 혹은 하부에 도전층을 개재하고, 상기 도전층에 전계를 인가하여 그것의 주울 가열에 의해 발생한 고열로 비정질 실리콘 박막을 급속 고온 고상 결정화하는 방법에 관한 기술인 JIC (Joule-heating Induced Crystallization) 결정화 공정을 개발하였다. 본 공정은 상온에서 수 micro-second 내에 결정화를 수행하는 것이 가능하며 도전층과 실리콘 박막 사이에 barrier층 삽입를 통하여 금속 오염을 막을 수 있으며 공정적인 측면에서도 별도의 chamber가 필요하지 않는 장점을 가지고 있다. 본 논문에서는 JIC 결정화 공정 조건에 따른 결정화 기구 및 JIC poly-Si의 미세구조 및 물리적 특성에 관한 논의가 이루어질 것이다.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2004.10a
/
pp.148-151
/
2004
Different kinds of feedstock of semisolid a356 aluminum alloy manufactured by EMS stirring only, inoculation of Al-5Ti-B only and combination of inoculation and EMS stirring were investigated. It is found that the grain size of these feedstock are $350{\mu}m$ for EMS casting only, $320{\mu}m$ for inoculation by Al-5Ti-B, and $100{\mu}m$ for the combination of EMS stirring and inoculation of Al-5Ti-B master alloys. The microstructure of the sample obtain by combination of inoculation and EMS system show the best homogeneousness and finest grains.
Proceedings of the Korean Society Of Semiconductor Equipment Technology
/
2005.09a
/
pp.73-77
/
2005
고분해능 투과전자현미경을 이용하여 PRAM소자의 상변화물질인 $Ge_{2}Sb_{2}Te_{5}(GST)$의 결정화에 관해 미세구조 분석을 수행하였다. 결정성을 측정하는 일반적인 방법인 XRD법에 비해 고분해능 투과전자현미경을 이용한 미세구조 분석은 XRD에서 분석할 수 없는 결정화 초기 양상을 분석할 수 있을 뿐만 아니라, 소자내부의 국부적인 영역과 같이 특정한 영역에서의 결정구조 및 원자배열에 관한 분석이 가능하였다. 이를 통해 GST박막의 전기적 특성이 결정립 크기에 직접적으로 연관성이 있음을 밝혀내었다. GST의 결정구조 및 원자배열에 관해서는, 제한시야전자회절 기법을 통해 준안정상에서의 GST는 FCC 구조를 가지고 안정상의 GST는 hexagonal 구조를 가짐을 보여주었으며, 고분해능 이미지 관찰을 통해 원자단위로 GST의 결정성을 규명하였다.
To investigate the effects of V and Sb on the recrystallization of Zr-0.8Sn alloy, the microstructure of heat-treated specimens was observed by optical microscope, SEM, and TEM. Microhardness tests were also carried out for the annealed specimens. From microstructural studies, the V or Sb additions were found to delay recrystallization process as well as grain growth. Especially, Sb was more effective in delaying the recrystallization. This delay of recrystallization and grain growth by V or Sb additions may be due to the interference in the movement of dislocation and crystal interface by V or Sb precipitates.
Proceedings of the Korean Nuclear Society Conference
/
1995.05b
/
pp.733-738
/
1995
$UO_2$ 및 CeO$_2$ 분말을 turbular mixer에서 혼합, 또는 attritor mill에서 분쇄한 후, 각 분말의 특성변화와 이에 따른 소결특성의 변화를 관찰하였다. 혼합된 분말은 평균입자크기와 비표면적이 각각 22.9$\mu\textrm{m}$, 5.1g/㎤이었고, 2시간 분쇄된 분말은 0.5$\mu\textrm{m}$, 6.7g/㎤이었다. 혼합분말로 성형할 경우의 소결밀도는 성형압력의 증가에 관계없이 약 9.6 g/㎤로서 매우 낮았고, 2시간 분쇄된 분말은 10.35 9/㎤ 이상으로 나타나, 혼합핵연료 소결체 제조시 분쇄공정이 반드시 필요함을 나타내었다. 분쇄된 분말을 환원성분위기에서 소결할 경우에는 분쇄시간이 증가함에 따라 결정립이 8$\mu\textrm{m}$까지 증가하였는데 이것은 CeO$_2$ 분말의 미세화와 함께 Ce 성분이 균질 하게 분포되었기 때문으로 사료된다. 그러나 산화성분위기에서는 분쇄시간이 증가할 때 평균 결정립크기는 6$\mu\textrm{m}$로서 변화가 거의 없었다.
Proceedings of the Korea Association of Crystal Growth Conference
/
1997.10a
/
pp.69-74
/
1997
MCFC(Molten Carbonate Fuel Cell) Ni anode의 기계적 특성을 개선시키기 위해서 Ni-W복합재료를 기계적 합금법으로 제조하였다. 기계적 합금화한 분말을 XRD, SEM으로 관찰한 후 두께 1mm, 직경 8mm의 원반형으로 성형하였다. 소결은 120$0^{\circ}C$의 수소 분위기내에서 10시간 행하였다. 이렇게 제조한 시편의 절단된 면을 연마하여 SEM 및 EDX로 관찰하였으며 XRD로써 성분분석 하였다. 기계적 합금화 시간이 증가함에 따라 불충격에 의한 결정립 미세화가 이루어졌으며 80시간 기계적 합금시 재료의 규칙적인 결정이 파괴되어 비결정질화 되었다. 기계적합금으로 Ni 기지내에 균일하게 분포된 W은 분산강화효과를 통해 Ni anode의 기계적 특성을 개선시킬 것으로 기대된다.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2003.05a
/
pp.92-95
/
2003
Asymmetric rolling of AA1050 Al alloy sheets was performed to obtain the shear textures for improving the deep drawability and the grain refinement. The effect of roll velocity ratio on the texture and the grain refinement of 50% asymmetrically rolled sheets was studied. The textures of the asymmetrically rolled sheets after annealing at 400$^{\circ}C$ for 1 h was also investigated.
The purpose of this study is to investigate the degradation of soft magnetic properties of Fe-Hf-N thin films after annealing in vacuum. They were annealed at 450℃∼650℃. The microstructure and crystal phase of the selected area of the thin films were analyzed by TEM and SAD. After annealing at 450℃-600℃, the coercivity of the films increased by 0.2 Oe and the effective permeability decreased by 1500 as compared with them before annealing due to the growth of α-Fe crystallites. The saturation magnetic flux density of the films increased by 0.5 KG after annealing under 600℃. However, the soft magnetic properties of the film annealed at 650℃ degraded abruptly, which was attributed to the destruction of nano-crystalline microstructure of the film due to the rapid growth of α-Fe crystallites with the segregation of N sited in the α-Fe lattice into HfN.
Proceedings of the Materials Research Society of Korea Conference
/
2003.03a
/
pp.25-25
/
2003
마그네슘 합금은 결정구조가 HCP구조로 슬립면이 제한되어있어 상온에서의 가공이 용이하지 않다. 따라서 최근 마그네슘 합금의 미세 조직을 제어하기 위해 많은 연구가 수행되어 왔다. 본 연구에서는 구조용 재료 및 기능성 재료로 기대되는 마그네슘 합금(AZ3l)을 이용하여 주조로부터 압출·압연 과정으로의 연속적인 판재 성형공정을 실행하였다. 모든 공정에 대한 전형적인 기계적 특성을 평가하기 위하여 각 공정에서 재료의 인장실험을 실시하였으며 각 공정 후에 향상된 기계적 특성들을 규명하기 위하여 경도시험을 실시하였다 또한 각 공정에서의 대표적인 미세 조직을 관찰하여 결정립 미세화에 따른 기계적 물성의 향상을 확인하였다. 주조재, 압출판재, 압연판재의 인장강도는 189.3㎫, 257.9㎫ 그리고 234.㎫로 증가하였다가 다소 감소하지만, 연신율은 상대적으로 16.26%, 24.99% 그리고 27.16%의 50%에 가까운 주목할만한 증가를 나타낸다. 인장실험의 실험결과로부터 얻어진 가공경화지수로부터 대상 재료인 마그네슘 합금(AZ3l)에 대하여 DRX의 거동을 예측할 수 있었으며, 압출후 압연 판재의 경우 연한 재결정 조직으로 인하여 연신율의 대폭적인 증가를 확인 할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.