• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.452-460
• /
• 2003

In this paper, an equalizer(RNE) using nonlinear multilayer combining techniques in Bayesian equalizer with a structure of radial basis function network is proposed in order to simplify the structure and enhance the performance of the equalizer(RE) using a radial basis function network. The conventional RE Produces its output using linear combining the outputs of the basis functions in the hidden layer while the proposed RNE produces its output using nonlinear combining the outputs of the basis function in the first hidden layer. The nonlinear combiner is implemented by multilayer perceptrons(MLPs). In addition, as an infinite impulse response structure, the RNE with decision feedback equalizer (RNDFE) is proposed. The proposed equalizer has simpler structure and shows better performance than the conventional RE in terms of bit error probability and mean square error.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.193-201
• /
• 2022

SOQPSK-TG is a modulated signal for aircraft telemetry with excellent frequency efficiency and power efficiency. In this paper, the phase waveform of the partial response SOQPSK-TG modulation is linearly approximated and modeled as a full response double duobinary SOQPSK (SOQPSK-DD) signal. And using the XTCQM method and the Laurent decomposition method, the SOQPSK-DD signal was approximated as OQPSK having linear pulse waveforms, and the results of the two methods were proved to be the same. In addition, it was confirmed that the Laurent decomposition waveform of the SOQPSK-DD signal approximates the Laurent decomposition waveform of the original SOQPSK-TG signal. And it was shown that the decision feedback IQ-detector, which applied the Laurent decomposition waveform of SOQPSK-DD to the detection filter, exhibits almost the same performance even with a simpler waveform than before.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.11
• /
• pp.1104-1112
• /
• 2013

This paper presents a wideband Colpitts voltage controlled oscillator(VCO) with nanosecond startup time and a center frequency of 8.35 GHz for a new bubble-type motion detector that has a bubble-layer detection zone at the specific distance from itself. The VCO circuit consists of two parts; one is a negative resistance part with a HEMT device and Colpitts feedback structure and the other is a resonator part with a varactor diode and shorted shunt microstrip line. The shorted shunt microstrip line and series capacitor are utilized to compensate for the input reactance of the packaged HEMT that changes from capacitive values to inductive values at 8.1 GHz due to parasitic package inductance. By tuning the feedback capacitors which determine negative resistance values, this paper also investigates startup time improvement with the negative resistance variation and tuning bandwidth improvement with the reactance slope variation of the negative resistance part. The VCO measurement shows the tuning bandwidth of 2.3 GHz(28 %), the output power of 4.1~7.5 dBm and the startup time of less than 2 nsec.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.79-85
• /
• 2001

In this paper, we propose a new technology mapping algorithm for CPLD consider area under time constraint(TMFCPLD). This technology mapping algorithm detect feedbacks from boolean networks, then variables that have feedback are replaced to temporary variables. Creating the temporary variables transform sequential circuit to combinational circuit. The transformed circuits are represented to DAG. After traversing all nodes in DAG, the nodes that have output edges more than two are replicated and reconstructed to fanout free tree. This method is for reason to reduce area and improve total run time of circuits by TEMPLA proposed previously. Using time constraints and delay time of device, the number of graph partitionable multi-level is decided. Initial cost of each node are the number of OR-terms that it have. Among mappable clusters, clusters of which the number of multi-level is least is selected, and the graph is partitioned. Several nodes in partitioned clusters are merged by collapsing, and are fitted to the number of OR-terms in a given CLB by bin packing. Proposed algorithm have been applied to MCNC logic synthesis benchmark circuits, and have reduced the number of CLBs by 62.2% than those of DDMAP. And reduced the number of CLBs by 17.6% than those of TEMPLA, and reduced the number of CLBs by 4.7% than those of TMCPLD. This results will give much efficiency to technology mapping for CPLDs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.53-60
• /
• 2003

For the high center of gravity vehicles the roll stiffness of their suspensions is arranged to be very high because such vehicles are in some danger of tipping over in cornering. In some cases, the effective roll stiffness is determined significantly by the compliance of the tires because of the very stiff anti-roll members incorporated in the suspension. In such cases, it is clear that the shock absorbers which may be effective in damping heave oscillations have little effect on roll oscillations. Therefore, wind gusts and roadway unevenness may cause large swaying oscillations. In this paper, to improve the stability for the high center of gravity vehicles a control scheme to augment the damping of the roll mode is proposed. As the feedback signals needed to provide damping of the roll motion, the front or rear steer angles or both are chosen because they are very related to roll motion. The scheme is effective from moderate to high speeds and stabilizes the roll mode without introducing disturbance moments from roadway unevenness as shock absorbers do. The validity on the proposed method is verified through the computer simulation.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.228-232
• /
• 2018

Dealing with quntization error in a control system properly becomes much more important as many devices are connected through network and controlled. Thus, in this paper, we study a data rate condition on quantizer to achieve practical stability in a discrete time linear time invariant system with state feedback control. First, required data rate is shown to depend on eigenvalue of the closed loop system, the size of the initial state vector, the magnitude of initial quantization error, and control gain in the absence of process noise. It additionally depends on the maximum magnitude of process noise when noise is not zero. Asymptotic analysis shows that a new design method may be needed to reduce the date rate for a networked control in the presence of quantization error and noise.. We provide a simple numerical evaluation of uniform quantizer and logarithmic qunatizer to assess their characteristics of practical stability depending on data rate in the presence of noise.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.169-173
• /
• 2012

In this paper, we propose an equalizer to minimize the inter-symbol interference when PSSK(Phase Silence Shift Keying) technique is applied to the low power underwater acoustic communication. PSSK is a QPSK(Quadrature Phase Shift Keying) modulation combined with PPM(Pulse Position Modulation), and it was proposed for low power communication. However, it has poor performance due to delay spread of underwater channel. In this paper, we propose a decision feedback equalizer to minimize the error in PSSK receiver. The sea trial was performed to evaluate the performance of the proposed method. In the result, the BER of PSSK was $4.36{\times}10^{-2}$ before the equalizer was applied, but the BER of PSSK was $3.95{\times}10^{-4}$ after the proposed equalizer was applied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.295-301
• /
• 2011

In [1], it has been shown that the energy spreading transform (EST) based iterative equalizer (IE) could enhance its performance by improving the reliability of the decision feedback symbols without the help of the complicated channel decoder. In the matched filter (MF) based IE proposed in [1], however, its feedforward filter (FFF) has been designed in the frequency domain while its feedback filter (FBF) in the time domain. So its complexity increases proportional to the channel memory length. To solve this problem, in this paper, both FFF and FBF are designed in the frequency domain. This enables the proposed frequency domain IE (FD-IE) to achieve the lower complexity over the conventional method in the highly dispersive channel. In addition, simulation results demonstrate that the BER performance of the proposed method is the same as the conventional.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.295-302
• /
• 2015

Acoustic channels are characterized by long multipath spreads that cause inter-symbol interference. The way in which this fact influences the design of the receiver structure is considered. To satisfy performance and throughput, we presented consecutive iterative BCJR (Bahl, Cocke, Jelinek, Raviv) equalization to improve the performance and throughput. To achieve low error performance, we resort to powerful BCJR equalization algorithms that iteratively update probabilistic information between inner decoder and outer decoder. Also, to achieve high throughput, we divide long packet into consecutive small packets, and the estimate channel information of previous packets are compensated to next packets. Based on experimental channel response, we confirmed that the performance is improved for long length packet size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1332-1339
• /
• 2000

This paper presents the architecture and design of a high speed asymmetric data transmission baseband MODEM ASIC chip for CATV networks. The implemented MODEM chip supports the physical layer of the DOCSIS(Data Over Cable Service Interface Specification) standard in MCNS(Multimedia Cable Network System) The chip consists of a QPSK/16-QAM transmitter and a 64/256-QAM receiver which contain a symbol timing recovery circuit, a carrier recovery circuit, a blind equalizer using MMA and LMS algorithms. The chip can support data rates of 64Mbps at 256 QAM and 48Mbps at 64-QAM and can provide symbol rates up to 8MBaud. This symbol rate is faster than existing QAM receivers. We have performed logic synthesis using the $0.35\mu\textrm{m}$ standard cell library. The total number of gates is about 290,000 and the implemented chip is being fabricated and will be delivered soon.