• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.12
• /
• pp.3344-3351
• /
• 1995

The stability of diffusion flame formed behind a bluff body with fuel injection slits was experimentally investigated in various fuel injection angles, fuel injection ratios, grids and extension ducts. The flame stability limits, temperature distributions and length of recirculation zones, direct photographs of flames were measured in order to discuss the stabilization mechanism of the diffusion flame. The results from this study are as follows. The fuel injection angle is an important factor in determining the flame stability. Stability limits can be improved by variety of the fuel injection ratio. When the grid and extension duct are set, stability characteristics are varied with the blockage ratios, grid intervals, and grid numbers. The recirculation zone not only serves as a steady ignition source of combustion stream but also governs the stabilization mechanism.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2062-2072
• /
• 1991

The effect of free stream turbulence on the flow characteristics behind a circular cylinder is investigated in the present experimental study. The various free stream turbulent intensities are generated by different combinations of cylinder locations and grid shapes. Split film sensor with constant temperature anemometer is used to measure the local instantaneous velocity components. Experimental results demonstrate the large scale coherent structures are rapidly distorted and the Strouhal number is decreased with increasing free stream turbulent intensity.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.146-152
• /
• 2000

Two and Three dimensional dynamic adaptation code is developed for transient computations. This code involves mesh refinement and coarsening to either add points in high gradient regions of flow or remove points where they are not needed, for high spatial accuracy. Temporary cell algorithm is used to maintain the original grid quality. To show the assessment of the accuracy and efficiency, two dimensional study and unsteady flows are computed. Also, three dimensional steady computations are made to assess the refinement using temporary cell algorithm. The result shows the high spatial accuracy primarily in discontinuity regions in steady and unsteady computation.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.993-995
• /
• 1998

We fabricated fiber gratings with three different Ge-doped fibers exposed to 60atm pressure of Hz gas at 90"C for different times and studied the effects of Ge-doping concentration and $H_2$ loading time on the growth of gratings. According to experiments. the growing effect of hydrogen loading on high Ge-doped fiber was great.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.239-246
• /
• 1994

Cd1-xCoxIn2Se4($\chi$=0.000, 0.001, 0.005, 0.10, 0.50) 단결정을 수직 Bridgman 방법으로 성장시키고 성장된 단결정의 조성 및 결정구조를 조사하고 광학적 특성을 연구하였다. 성장된 단결정은 pesudocubic 구조이고 격자상수는 조성$\chi$가 증가함에 따라 약간씩 감소하였다. 기초 흡수단 영역에서의 광흡수 spectra 측정에서 이 단결정들은 간접전이 및 직접전이 및 직접전이 energy gap을 갖고 있으며 이들 energy gap의 조성의존성은 조성이 $\chi$=0.00에서 $\chi$=0.016까지는 기울기가 같고 $\chi$=0.016에서 기울 기가 변화되어서 $\chi$=0.016에서 $\chi$=0.50까지는 같은 기울기를 갖고 있다. 이러한 현상은 $\chi$=0.016에서부터 CdIn2Se4 내에 cobalt를 포함한 새로운 물질이 형성되고 이 물질과 a-CdIn2Se4 사이에 고체고용체를 형 성하기 때문이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1042-1045
• /
• 2002

We have carried out two-beam interference experiments to form holographic gratings on amorphous $MgF_2$/As-Ge-Se-S multi-layer. In this study, holographic gratings have been formed using He-Ne laser(632.8nm). under different polarization combinations. The diffraction efficiency was obtained by +1st order intensity. The maximum diffraction efficiency of As-Ge-Se-S single layer and $MgF_2$/As-Ge-Se-S multi-layer were 0.8% and 1.4%

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.112-113
• /
• 2006

In this paper. we investigated a characteristic of holographic grating data erasure with non-polarized beam at amorphous chalcogenide As-Ge-Se-S thin film. A sample of holographic grating data was formed with DPSS laser for setup. Then, the erasure process was performed with He-Ne laser vertically at sample. As-Ge-Se-S(single layer). Ag/As-Ge-Se-S(double layer) and As-Ge-Se-S/Ag/As-Ge-Se-S(multi-layer) are manufactured to compare their characteristic of erasure.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.31.1-31.1
• /
• 2011

현재 발광 소자, 태양전지, 디스플레이 등의 산업 분야에서는 저반사 나노 패턴, 광결정 패턴, 초소수성 나노 구조 등을 적용하여 소자의 효율을 향상시키기 위한 연구가 진행되고 있다. 하지만 이러한 기능성 패턴 제작을 위해서는 기능성 소재의 증착, 노광 공정, 식각 등의 복잡하고 고가인 공정이 필요하기 때문에 실제 적용이 어려운 한계가 있다. 이에 본 연구에서는 나노 입자가 분산된 레진을 직접 임프린팅하는 저비용의 간단한 공정으로 나노 크기에서 마이크론 크기에 이르는 다양한 기능성 패턴을 제작하였다. 구체적으로, ZnO 나노 입자를 PMMA 레진에 분산하여 나노 입자 솔루션을 제작하였고 열경화 임프린트 공정을 통해서 Si 및 글래스 기판 위에 micron 및 sub-micron 급의 격자 패턴을 형성하였다. 이후 레진에 포함되는 ZnO 나노 입자 함량비에 따른 굴절률 및 투과도와 표면 거칠기에 따른 접촉각 측정을 통해서 기능성 패턴의 광학특성 및 표면특성을 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1445-1447
• /
• 2001

We have investigated about the grating formation of the $a-Se_{75}-Ge_{25}$ chalcogenide thin films. In this study, holographic gratings have been formed by using He-Ne laser(632.8nm) with different polarization states(linear, circular polarization). The diffraction efficiency was obtained by +1st order intensity of the diffracted beam. We have obtained maximum efficiency for Ag-doped thin film. It is observed the difference of the diffraction efficiency with polarization states. S:S-polarized state is shown high efficiency than the other polarization.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1503-1505
• /
• 2001

방사선이 폴리에틸렌 박막의 결정구조에 미치는 영향은 결정구조의 전 영역에서 결정 격자의 결함으로 나타났으며, 이는 탄탄한 연결고리를 형성하고 있는 분자쇄의 단절로 인하여 결정 내부 및 표면에서 화학작용에 의한 기포가 발생한 것으로 판단된다. 또한, 방사선량의 증가에 따라서 그 결함은 비례적으로 증가하였으며, 주파수에 따른 유전특성 고찰결과는 10 MHz 이상의 범위에서 유전율이 급격히 증가하였다.