• Composites Research
• /
• v.30 no.6
• /
• pp.331-337
• /
• 2017

The composite lattice structures have advantages of high specific stiffness and strength and are mainly applied to the structures of launch vehicles that carry the compressive load. However, since these structures are manufactured by filament winding technology, there are some defects and voids found in the knots. For these reasons, the stiffness and strength of the lattice structures have to be compared with finite element model for predicting design load. But, the full scale test is difficult because time and space are limited and the shape of structure is complex, and hence the simple and reliable test methods for examination of stiffness are needed. In this paper, subelements of composite lattice structures were prepared and compressive and bending test were conducted for examination of stiffness of helical and hoop rib. Test methods for subelements of composite lattice structures that has curved and twisted shape were supposed and compared with finite element analysis results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.388-402
• /
• 2000

The radiation characteristics of leaky antenna from the dielectric-coated conducting cylinder with periodic corrugation are investigated theoretically for the infinite and finite periodic structures. For the infinite periodic structure, mode-matching method is applied. The integral equation is derived for the finite periodic structure by use of the Fourier transform and mode expansion and a simultaneous linear equation is obtained. The influences of the corrugation slot width, corrugation depth, dielectric thickness, cylinder radius, and finite corrugation number on the radiation characteristics (leakage constant, phase constant, and radiation pattern) are investigated. The results of the finite periodic corrugations are compared with those of the infinite extent structure and good agreement is found. To reduce high side lobe levels of the uniform finite periodic structure, tapering process on the beginning and end section of antenna and nonuniform quasi-period slot arrays are considered. Especially, for the corrugation period, width and depth used for a corrugated surface wave antenna, through the proper tapering process, end-fire radiation pattern with reduced side lobe levels is given.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.27-33
• /
• 2003

Circular Distributed-feedback (DFB) guiding structures can be incorporated in most of the semiconductor laser devices because of the frequency-selective property applicable as an optical filter in optical communications. In this paper, we present a novel and simple modal transmission-line theory (MTLT) using Floquet-Babinet's principle to analyze the optical filtering characteristics of Bragg gratings with cylindrical profile. The numerical results reveal that this method offers a simple and convenient algorithm to analyze the filtering characteristics of circular DFB configurations as well as is extended conveniently to evaluate the guiding problems of circular multi-layered periodic structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.550-557
• /
• 2003

In this paper, two dualband internal antennas for GPS/PCS handset are proposed. At first, the monopole antenna with parasitic dipole element is designed to print PCB of handset directly. At second, the antenna with bended loop structure is designed to bend to use internal space of handset maximumly. The proposed dualband internal antennas provide a 2:1 VSWR bandwidth of over 19.1 % which are possible to cover two bands at once. the antennas have a gain between -0.4 and 3.33 ㏈i at all bands and they have almost omni-directional patterns.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.209-218
• /
• 1994

This study aims to generate triangulated irregular network in a form of digital terrain model which is being increasingly used. In general, grid digital elevation model and triangulated irregular network are reasonable units for solving terrain problems. But, triangulated irregular network is an efficient alternative to grid digital elevation model because of their efficiency in storing data and their convenient data structure for accommodating irregularly spaced elevation data. Various methods represented for extracting triangulated irregular networks from grid digital elevation model, and then algorithm that get accurate results for triangulation with their data set was introduced. The new approach for triangulation in this study uses the Elevation and Changeable Distance criterion, and adding interpolation points and restricted constraint lines can generate triangulated irregular network which is more close to real surface. This made database efficient construction and could be used for many applications of geo-spatial information system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.153-154
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.599-600
• /
• 2009

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.276-281
• /
• 2023

With the high design freedom of the additive manufacturing process, there is a growing interest in multi-dimensional lattice structures among researchers, who are studying intricate structural modeling that is challenging to produce using conventional manufacturing processes. In the case of titanium alloy implants for human insertion, a multi-dimensional lattice structure is employed to ensure compatibility with bones, adjusting strength and elastic modulus to levels similar to those of bones. Therefore, securing a database on the mechanical properties based on lattice structure design variables and the development of related simulation techniques are believed to efficiently facilitate the customization of implants. In this study, lattice structures were additively manufactured using Ti-6Al-4V alloy, and the elastic modulus was measured based on design parameters. The results were compared with simulations, and an approach to finite element analysis for accurate prediction of the elastic modulus was proposed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.159-170
• /
• 2005

The grid structure is parallel main girders intersected with crossgirder. It distribute the loads to adjoining main girder through the crossgirder when a girder is subjected to a load. grillage girder bridge has high load-carrying capacity, it can save materials and become more economical type of bridge. In this paper, the grillage girder bridge analysis program developed by using the transfer matrix method deals with following problems: the comparision with Leonhardt, Szabo, FEM yang and jung in the analysis of grillage girder bridges, quality of straight and curved bridges with skew angle, forces of straight and curved bridges according to skew angle and bending stiffness/torsional stiffness ratio.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.163-163
• /
• 2010

저차원 나노양자구조에서 전자적 구조와 광 이득에 대한 연구는 전자소자나 광소자의 효율을 증진시키는데 중요한 역할을 하고 있다. 전자적 부띠 구조를 결정하기 위해서는 변형효과와 비포물선 효과를 고려하여 계산하면 나노 양자구조의 전자적 구조를 비교적 정확하게 계산 할 수 있다. 양자우물에서의 광 이득은 전자적 구조에 따른 전도 대역의 전자와 가전자 대역의 정공 사이에 발생하는 쿨롱 상호작용에 의한 엑시톤 결합 에너지를 고려함으로 정확히 계산할 수 있다. 본 연구에서는 양자 우물의 격자 부정합에 따른 변형효과와 전도대역에서 전자 에너지의 비포물선 효과가 양자 우물의 전자적 성질에 미치는 영향에 대하여 조사하였다. 또한, 온도변화에 따른 양자 우물의 전자적 구조를 계산하였고, 전자적 구조에 따라 엑시톤 결합 에너지가 광 이득에 미치는 영향을 계산하였다. 양자우물 구조에서 전자 및 정공의 부띠에너지, 파동함수 및 부띠천이 에너지를 가변메시 유한차분법으로 결정하였고, interacting pair Green's function 방법과 energy space integrated function 방법을 이용하여 광 이득을 계산하였다. 계산한 결과를 광루미네센스 측정으로 관측한 부띠에너지 천이와 비교하여 변형효과와 비포물선 효과가 전자적 구조에 미치는 영향과 엑시톤 결합 에너지가 광 이득에 미치는 영향에 대하여 비교하였다. 반도체 양자우물의 전자적 구조는 변형효과와 비포물선 효과에 의하여 영향을 받고 있는 것을 알 수 있었다. 또한, 전자-정공의 쿨롱 상호작용을 고려하여 계산한 광 이득이 온도 변화에 따라 관측한 실험 결과와 잘 맞는 것을 알 수 있었다. 이러한 결과는 격자 부정합한 화합물 반도체 양자우물의 저차원적인 전자적 구조와 광 특성을 이해하는데 많은 도움이 된다고 생각된다.