• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1088-1094
• /
• 2021

This paper proposes a partial BMA (Broadcasting Multiple Access) network structure and D-ARP (Distributed Address Resolution Protocol) method in order to support full mesh routing function in the DAMA (Demand Assigned Multiple Access)-based MF-TDMA (Multi Frequency-Time Division Multiple Access) satellite system. The partial BMA network enables legacy router devices and routing protocols to be adopted in the satellite communication system, and decreases the amount of routing protocol overhead. In addition, we introduce the D-ARP method that help a spoke satellite node acquiring the MAC (Media Access Control) address from remote satellite nodes in none BMA satellite network. The D-ARP method provides the MAC address of remote nodes to each other nodes through the broadcasting-enabled satellite channel. And we lastly evaluate and analysis the network performance of the proposed approach.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.169-175
• /
• 1997

Recently it is increased by degrees to produce complex and large lattice structures such as bridge, tower, crane, and space structures. In general, in order to analyse these structures we have used finite element method(FEM). In this method, however, it is necessary to use a large amount of computer memory and to take long computation time. For overcoming this problem, the Authors have developed the transfer dynamic stiffness coefficient method(TDSCM) which consists on the concept of the substructure synthesis method and transfer influence coefficient method. In this paper, the new free vibration analysis method for large type lattice structure is formulated by the TDSCM. And the results obtained by TDSCM are compared with those obtained by FEM, transfer matrix method and experiment. And it is confirmed for TDSCM to be the numerical high accuracy and high speed structure analysis method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.190-195
• /
• 1997

Recently it is increased by degrees to construct complex or large lattice type structures such as bridges, towers, cranes, and structures that can be used for space technology. In general, in order to analyze, these structures we have used the finite element method(FEM). In this method, however, it is necessary to use a large amount of computer memory and computation time because the FEM requires many degrees of freedom for solving dynamic problems for these structures. For overcoming this problem, the authors have developed the transfer dynamic stiffness coefficient method(TDSCM). This method is based on the concepts of the transfer and the synthesis of the dynamic stiffness coefficient which is related to force and displacement vector at each node. In this paper, the authors formulate vibration analysis algorithm for a complex and large lattice type structure using the transfer of the dynamic stiffness coefficient. And the validity of TDSCM demonstrated through numerical computational and experimental results.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.36-38
• /
• 2018

본 논문에서는 프로젝터와 카메라를 이용하여 다수의 평면이 결합된 형태의 사물스크린 공간에 디지털 사이니지 서비스를 제공하기 위한 기술을 개발하였다. 연구개발한 기술은 OpenGL 기반의 렌더링 소프트웨어 기반 위에 콘텐츠와 사물스크린 상호간의 기하학적 매핑, 스크린 색상과 주변 조명을 고려한 색상 보정 기능들이 적용되었다. 단순한 객체의 매핑 기능은 사각형과 같은 폴리곤 객체, 복잡한 사물공간 구조는 격자형 매쉬를 이용하여 보정하도록 지원한다. 색상 보정은 스크린으로 활용할 영역이 균일한 색상 특성을 가진 경우에 대응하여 관심 스크린 영역의 영상을 취득하여 컬러 혼합 행렬을 계산하고 이를 보정 S/W와 연동하여 처리되도록 개발했다. 본 연구개발 내용을 통해 향후 임의의 평면을 디지털 사이니지용 디스플레이 공간으로 쉽고 빠르게 활용하기 위한 요소 기술로 활용되기를 기대한다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.309-312
• /
• 2004

Two-dimensionally arrayed nanocolumn lattices were fabricated by using double-exposure laser holographic method. The hexagonal lattice was formed by rotating the sample with 60 degree while the square lattice by 90 degree before the second laser-exposure. The size and period of nanocolumns could be controlled accurately from 125 to 145 nm in diameter and 220 to 290 nm in period for square lattice by changing the incident angle of laser beam. The reactive ion etching for a typical time of 30 min using CH$_4$/H$_2$ plasma enhanced the aspect-ratio by more than 1.5 with a slight increase of the bottom width of columns.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.145-150
• /
• 2022

An analytical model based on a modal transmission-line theory (MTLT) is developed to investigate the optical transmission through metal gratings. This model gives well physical meanings for the transmission as well as for the dispersion relations of the modes responsible for high transmission. These concepts provide accurate information even for real metals used in the visible~near-infrared wavelength range, where surface plasmon polaritons (SPP's) are excited. Furthermore, the dispersion relations allow the nature of the propagation modes to be assessed. The propagation modes are hybrid between Fabry-Pérot like modes and SPP's. It is important to consider different period and aspect ratio of metal gratings in order to determine the nature of the hybrid modes. In this paper, the sensing characteristics and mode propagation phenomena of high-performance plasma bio-sensors that depend on these variables were clearly analyzed.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.259-271
• /
• 2022

Lattice preferred orientation (LPO), which shows a specific lattice-orientation of minerals, is affected by the deformation conditions of minerals. Because of this reason, LPO is very useful to study the deformation conditions of the minerals and the rocks. In this study, we collected amphibole-rich rocks from the Geumgye Mountain, Chugye-ri, Yugu-eup, Chungcheongnamdo, located in the southwestern part of the Gyeonggi Massif, and analyzed the LPO of amphibole and plagioclase using electron backscattered diffraction. Two types of LPOs of amphibole, type I and type IV, were observed in Yugu amphibole-rich rocks. Our data suggest that the amphibole-rich rocks in Yugu were deformed by rigid body rotation regardless of the LPOs and grain size of amphibole, and the LPOs are considered to have been affected by the degree of deformation (i.e. strain). In the low strained amphibole-rich rock, a strong type I LPO and a large grain size of amphibole were observed. On the other hand, in the highly strained amphibole-rich rocks, a weak type IV LPO and a small grain size of amphibole were observed. The various degree of deformation observed in the Yugu amphibole-rich rocks were also observed in the adjacent peridotites, indicating that the rocks in Yugu experienced various levels of deformation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.81-84
• /
• 2007

In this paper, fiber optic sound and vibration monitoring sensor which is latticed shape structure based on Sagnac interferometer is fabricated and tested in laboratory conditions. To detect external vibrations surface mounted fibers on the latticed steel wire fence with a dimension of 170cm by 180cm is used. To detect external sound frequency the tightened fiber optic itself wire netting fence with a dimension of 50cm by 50cm is used. Experiments for the detection of the excited vibration and sound signals were performed. A small vibrator induced external vibration signal and it is applied to the latticed structure in the range of 100Hz to several kHz. External sound signal applied to the fiber optic sensor net using non-directional sound speaker. The detected optical signals were compared and analyzed to the detected both accelerometer and microphone signals in the time and frequency domain. Based on the experimental results, distributed fiber optic sensor using Sagnac interferometer detected effectively external vibration and sound signal and had a good performance. This system can be expanded to the monitoring of a significant system and to the structural health monitoring system.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.61-68
• /
• 2011

In order to clarify the structural performances of Welded Deformed Steel Bar Mats (WDSBM), the research stated includes the tests for standard hook of top bars of slab in concrete slab-wall joints, the tests for embedment length of top bar of slab, and the development strength tests for standard hook. The test results are as follows; (1) For slab-wall joints using WDSBM as reinforcement in slab, if the top bars of WDSBM are spliced by ordinary bars with sufficient development length and size, it is enough for the strength and crack control. (2) When WDSBM of slab is spliced in joint, the strength is increased with the embedment of bars of this WDSBM into wall. Beyond peak strength, however, ductility is diminished to that as no splice due to pull-out failure. (3) For slab-wall system, ultimate strain of concrete for flexural compression zone in lower surface of slab seems much greater than that of normal concrete beam. The reason is that normal concrete beam has the joint with $180^{\circ}$, however slab-wall joint has the $90^{\circ}$ of which concrete can be confined.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.40-45
• /
• 1998

Th-232를 Fertile 핵연료로 사용한 압력관형 고전환 경수로심을 설계하였다. 토륨 Blanket은 10년 정도 노내에 위치시키고, 농축 우라늄 Driver는 매년 재장전하도록 설계하였다. Driver로는 $UO_2$핵연료와 U-10%Zr 금속 핵연료를 사용하였고, Blanket으로 이중 탄소 피막 핵원료를 ThO$_2$에 적용한 핵연료를 사용하였다. 핵연료봉의 구조는 울진 3/4호기 핵연료와 같은 재원으로 하였으며 육각형 격자 배열로 집합체를 구성하였다. Seed Bundle을 1년 단위로 교체하고 Blanket Bundled을 5년-10년간 노내에 위치시키는 경우 경수로보다는 높은 전환율 갖는 원자로를 설계할 수 있다.