• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.68-77
• /
• 2012

The joint of existing steel grid composite deck is composed of lap splice of reinforcing bar with end hooks and field-placed concrete. In this study, bending tests of deck joint composed of concrete shear key and high tension bolts are carried out for the design variable, concrete shear key strengthened with steel plate or not, and test results are compared with flexural performance of the existing deck joint. Test results showed that the mechanical deck joint has about 30% ~ 60% more ultimate bending strength than the existing joint. According to analysis results of moment-curvature relationship, the initial bending stiffness of the existing deck joint is some higher than that of mechanical joint. But, after crack failure the structural performance of the existing deck joint is rapidly reduced. Furthermore, the deck joint with the strengthened shear key with steel plate has more bending moment capacity than the deck joint without strengthening. And strengthening of shear key has positive influence on the increase of bending stiffness.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.436-436
• /
• 2022

셀룰러 오토마타(Cellular Automata; CA)는 격자(cell)에 대해 사전 정의된 규칙을 바탕으로 이웃 격자 간 상호작용을 해석하여 복잡한 동력학적 현상을 효과적으로 재현할 수 있는 이산형(discrete) 모의 기법이다. CA 기법은 격자 구조에 수치표고 자료 및 토양수분 정보 등을 직접 매칭 후 상호관계를 해석하기 때문에 공간정보를 최대한 활용하여 불균질성을 나타내는 것이 가능하다. 따라서, 도시 유출해석에 있어서 높은 정확도와 빠른 계산속도를 기대할 수 있다. 본 연구에서는 CA 기반 고해상도 물순환·침수 연계 해석 framework 개발 방향 및 CA 기반 prototype 모형의 사면유출 적용 사례를 소개한다. 개발 중인 CA 모형에서는 격자별 침수 깊이, 침투, 토양수분 저류, 지표 유출 등의 물순환 요소를 모의할 수 있다. 기존의 집중형(lumped) 모형은 지표-지표하 유출에 대한 routing algorithm이 없고 각 셀의 물수지 모형 내 파라미터가 많은 단점이 있다. 따라서 개발 중인 CA 모형에서는 cell state 내 fast reservoir와 slow reservoir를 통해 지표-지표하 상태를 구현하고 단순화된 물수지 모형 및 흐름 방향 알고리즘을 적용함으로써 실제 현장에서 발생하는 다중 피크 형태의 지표 유출을 모사한다. 최적의 지표수 흐름 방향 알고리즘 선정을 위해 3개의 다중 흐름 방향 알고리즘(D4, D8, 4+4N)을 정량적으로 비교·분석한다. 이번 발표에서는 CA 모형을 소규모 산지 사면과 도심지 등 다양한 규모의 테스트베드에 적용하여 모형의 장단점을 평가한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1787-1791
• /
• 2006

수공 구조물 설계를 위한 설계홍수량의 산정은 실측홍수량의 빈도해석을 통해 빈도별 설계 홍수량을 결정하는 것이 가장 바람직하나, 관측 홍수량 자료의 부족으로 인해 대상 유역의 강우량을 강우-유출 모형에 입력하여 설계 홍수량을 구하는 것이 일반적이다. 이러한 목적을 위해 이용되는 강우-유출 모형의 효과적인 적용을 위해서는 적절한 모형 매개변수의 결정이 매우 중요하며, 이를 위해 주로 이용되는 GIS 프로그램의 경우에는 적절한 격자 크기의 결정이 매개 변수 및 홍수량의 산정에 큰 영향을 미치게 된다. 본 연구에서는 분포형 강우-유출 모형인 TOPMODEL을 이용한 분석을 실시하였으며, 격자 크기의 변화에 따른 홍수량의 변화를 실측 홍수량과 비교 분석하였다. 분석 결과 괴산댐 유역 의 경우 격자 크기 $100{\times}100m$일 때 추출된 지형학적 매개변수를 이용해서 모의한 유출량이 실측 유량과 가장 근접한 것으로 분석 되었으며, 격자 크기에 따른 홍수량의 변화를 파악할 수 있었다. 추후 대상 유역을 확대한 연구를 통해 유역특성에 따른 격자 크기 결정 기준이 수립된 다면 분포형 강우-유출 모형의 신뢰성 향상에 기여할 수 있을 것으로 기대된다.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.418-426
• /
• 2019

Purpose: After analyzing the seismic capability of low-rise RC grid structures with insufficient seismic performance, the purpose of the project is to install steel slab hysteretic dampers (SSHD) to improve the seismic performance of beams and columns, and to suggest measures to minimize damage to the structure and human damage when an earthquake occurs. Method: The evaluation of the seismic performance of a structure is reviewed based on the assumption that the seismic performance is identified for the grid-type subway systems that are not designed to be seismic resistant and the installation of an SSHD system, a method that minimizes construction period, if insufficient, is required. Result: After the application and reinforce of structure with SSHD, and the results of eigenvalue analysis are as follows. The natural periodicity of longitudinal direction was 0.55s and that of vertical direction was 0.58s. Conclusion: As results of cyclic load test of structure with SSHD, the shear rigidity of damper is 101%, the energy dissipation rate is 108% and, plastic rotation angle of all column and beam is satisfied for $I_o$ level and therefore it is judged that the reinforce effect is sufficient.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.38-47
• /
• 2013

For the joint connection of the precast steel grid composite decks, the prefabricated joint which is composed of concrete shear key and high-tension bolts was already proposed. In this study, for the purpose of increasing the bending stiffness and bending strength of the proposed prefabricated joint section details of the proposed joint are modified, and through experimental tests the bending performance, such as stiffness and strength of a modified joint, is compared with those of the proposed joint. Test and analysis results show that the shear cracks in the concrete shear key are clearly reduced by the strengthening of the shear key using shear studs and additional rebars. According to analysis results of the moment-curvature relationship, bending stiffness of the modified joint is about 47% greater than the stiffness of the proposed joint. Furthermore, the modified joint has about 32% greater bending strength than the proposed joint. Compared to specimens without the joint the modified joint has same or slightly higher bending strength, but about 37% lower bending stiffness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1663-1668
• /
• 2012

A spacer grid, which is one of the structural components in a PWR fuel, is an interconnected array of slotted grid straps that are welded at the intersections to form an egg-crate structure. The spacer grid is required to have sufficient lateral crush strength to enable nuclear reactor shut-down during abnormal operating environments. Previous studies on the lateral crush strength analysis of the spacer grid were performed using only the base material properties. In this study, to investigate the effect of the lateral crush strength of the spacer grid when using the mechanical properties in the weld zone instead of the base material properties, lateral crush strength analysis by considering the mechanical properties in the weld zone as obtained from the instrumented indentation technique was performed, and the results were compared with those of previous studies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.126-131
• /
• 1994

본 연구에서는 굽힘파(bending wave)의 전달만 고려하였는데 실제로는 보 및 비틀림 모드도 존재하나 고주파수 대역에서는 굽힘모드가 지배적이며 소음의 발생도 굽힘모드에 의해 주로 발생하므로 보 및 비틀림모드의 생략이 큰 오차를 가져오지는 않는다. 테스트 모델에 대해 실험을 수행하여 결과를 비교하였다. 또한 구조물의 고주파수 진동소음 해석방법으로 널리 쓰이는 통계적 에너지 해석법(SEA)을 이용한 결과와 비교하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.94-103
• /
• 2018

The purpose of designing composite lattice structure which applied to launching vehicle and tactical missile body is to minimize the thickness and weight for applied load. It is usually made of carbon fiber; fabricating with filament winding process over silicon mold, and provided with a window opening for inspection purpose if necessary. In this paper compression test is conducted without window opening in lattice structure and preliminary FEA is carried out to confirm its accuracy. And then FEA is performed for the case of window opening to evaluate the soundness and the safety factor of the structure. We have calculated for two kinds of window shape; rectangular one and hexagonal one. And we have calculated safety factors of the lattice structure with window opening in every case based on failure strength of rib and knot with varying the thickness and location of the window for hexagonal shape. Through our investigation, we have found out the followings; (1) the hexagonal shaped window is shown higher safety factor than rectangular one, (2) a window in a certain location is shown higher safety factor than others, (3) although the soundness of window structure is improved as increasing its thickness, a window of a certain thickness is shown higher safety factor than others because of stress concentration.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.159-170
• /
• 2005

The grid structure is parallel main girders intersected with crossgirder. It distribute the loads to adjoining main girder through the crossgirder when a girder is subjected to a load. grillage girder bridge has high load-carrying capacity, it can save materials and become more economical type of bridge. In this paper, the grillage girder bridge analysis program developed by using the transfer matrix method deals with following problems: the comparision with Leonhardt, Szabo, FEM yang and jung in the analysis of grillage girder bridges, quality of straight and curved bridges with skew angle, forces of straight and curved bridges according to skew angle and bending stiffness/torsional stiffness ratio.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.33-42
• /
• 1987

Grid structures are extensively used in bridge and slab strucures. When the elements are assembled for the entire structure the number of degree of freedom may be very large and thus, the stiffness, mass, and damping matrices become of large dimension. Undoubtedly, determining natural frequencies and mode shapes of such structures are complicated and require large computer costs. For these reasons various eigenvalue economizer procedures have been developed, which serve to reduce the number of degree of freedom. This paper proposes an economic method of dynamic analysis of grid stuctures using static and dynamic condensation techniques. The accuracy and economy of this method are investigated by comparing some results of model analysis of N-degree of freedom. It has been shown that the method achieves remarkable economy at only a little cost of accuracy.