• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.143-149
• /
• 2020

The purpose of this study is to manufacture a variable density - hybrid lattice structure control by filling the pore of the metal addictive manufactured lattice structure with lightweight reactive acrylic compounds(RAC). To apply the variable density - hybrid lattice structure to the construction industry, the enhancing adhesion - reactive acrylic compounds(EA-RAC) which increased the adhesion strength was manufactured by adding ordinary portland cement to the RAC. Finally, the EA-RAC was filled into the lattice structure to test the specific density, water absorption, and adhesion strength of the variable density - hybrid lattice structure. The results were obtained with density controllable, water absorption less than 1.0%, and 1-day bonding strength of 1.78 MPa to 1.98 MPa.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1663-1668
• /
• 2012

A spacer grid, which is one of the structural components in a PWR fuel, is an interconnected array of slotted grid straps that are welded at the intersections to form an egg-crate structure. The spacer grid is required to have sufficient lateral crush strength to enable nuclear reactor shut-down during abnormal operating environments. Previous studies on the lateral crush strength analysis of the spacer grid were performed using only the base material properties. In this study, to investigate the effect of the lateral crush strength of the spacer grid when using the mechanical properties in the weld zone instead of the base material properties, lateral crush strength analysis by considering the mechanical properties in the weld zone as obtained from the instrumented indentation technique was performed, and the results were compared with those of previous studies.

• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.517-521
• /
• 1997

고분해능 전자현미경과 컴퓨터 이미지 시뮬레이션이 La이 첨가되고 또한 첨가되지 않은 Pb(Mg/ sub 1/3/Nb$_{2}$3/)O$_{3}$고용체의 미세구조를 연구하기 위해서 사용되었다. 불규칙격자 영역의 격자 이미지는 정방정 형태와 유사 육방정 형태를 각각 보였다. 규칙격자 영역에서 Mg과 Nb의 비화학양론적인 규칙격자 구조 현상이 <111>방향에 따라 관찰되었다. 실험 격자 이미지와 컴퓨터 시뮬레이션 이미지의 비교로부터, 규칙격자 구조를 가지는 영역의 장거리 규칙도는 0.2-0.7의 값을 가지고 있었고, 또한 규칙격자는 (NH$_{4}$)$_{3}$FeF$_{6}$결정구조를 가지고 있었다. 작은 값의 장거리 규칙도를 가지는 규칙격자를 가지는 영역에서, 변형률 파형이 관찰되지 않았다. 이것은 대부분 두 양이온이 그들의 위치에 있기 때문에, 원자 변위가 없었기 때문이다.

• Computational Structural Engineering
• /
• v.3 no.4
• /
• pp.105-112
• /
• 1990

A rational and straightforward method is introduced for developing continuum models of large platelike periodic lattice structures based on energy equivalence, The procedure for developing continuum models involves using existing finite element matrices in calculating strain and kinetic energies of a repeating cell. The equivalent continuum plate properties are obtained from the direct comparison of the reduced stiffness and mass matrices for continuum and lattice plates. Numerical results prove that the method developed in this paper shows very good agreement with other well-recognized methods.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.264-266
• /
• 2008

본 논문은 유한한 유전체 격자구조의 정확한 주파수 선택 특성을 해석하고자 새로운 방법을 제시하였다. 기존의 오차, 근사화를 갖고 있는 해석방법과는 달리 유한한 구조에서 근사화가 전혀 없는 방법을 제시하였다. 유한한 격자구조의 유전체는 내부에 존재하는 필드 분포가 한정되어 있으며 구조 파라메터등에 따라 유한한 모드만이 생길 수 있어 입사되는 필드에 따른 생성 모드가 한정되어 있다. 본 논문은 이러한 방법을 이용하여 유전체 격자구조의 주파수 선택특성에 활용에 이용될 수 있을 것으로 사료된다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.321-325
• /
• 2016

본 연구에서는 제일 원리 분자 동역학(AIMD, ab-initio Molecular Dynamics) 방법을 이용하여 다양한 크기의 황화 이온 격자 구조에서 리튬 이온의 이온 전도도에 대하여 연구했다. 주어진 격자 구조내에 리튬 이온의 량이 증가할수록 확산도(D, diffusivity)는 감소하는 경향을 보였이지만, 리튬 이온의 농도는 증가 하기 때문에 특정한 농도에서 이온 전도도는 최댓값을 나타냈다. 또한 격자 구조의 부피를 증가 시킬 경우에 리튬 이온의 농도는 감소하지만, 확산도가 증가하여 전체적인 이온 전도도는 증가하는 것을 확인하였다. 본 연구 결과는 격자 구조내 이온의 이동에 대한 이해를 높이고 보다 효과적인 새로운 이온 전도체 개발에 도움이 될것이다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.247-249
• /
• 2004

본 논문에서는 격자구조의 유전체에 수직으로 입사된 전자기파의 산란, 투과 특성을 얇은 위상 막 근사화 이론을 이용하여 분석하였다. 위상 막 근사화 이론은 격자구조가 입사되는 전자기파의 위상 변화만을 주는 것으로 간주하는 것으로 이를 이용하여 격자구조를 통과한 직후인 근거리 필드 분포를 TE 모드에서 계산하였다. 기존의 제시된 이론에 비해 비교적 간단하고 빠르게 산란 필드를 분석할 수 있다.

• Composites Research
• /
• v.30 no.6
• /
• pp.338-342
• /
• 2017

In this paper, evaluation method of structural integrity of cylindrical composite lattice structures was conducted. A finite element analysis was used to evaluate the structural integrity of composite lattice structures. In order to verify the optimal finite element in the evaluation of the structural integrity, finite element models for cylindrical composite lattice structure were generated using beam, shell and solid elements. The results of the finite element analyses with the shell and solid element models showed a good agreement. However, considerable differences were found between the beam element model and the shell and solid models. This occurred because the beam element does not take into account the degradation of the mechanical properties of the non-intersection parts of cylindrical composite lattice structures. It was found that the finite element analysis of evaluation of structural integrity for cylindrical composite lattice structures have to use solid element.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.119-127
• /
• 2011

This paper shows development of 1-3 dimensional hybrid mesh method to analysis flow induced by ultra-high speed vehicle inside a long distance tunnel. For three-dimensional analysis of the tunnel system many meshes are required. However it is not efficient to calculate the whole tunnel system in three-dimension. Therefore in this paper, three-dimension meshes was used to describe stations, shafts and around vehicle, and one-dimension meshes was used to describe the tunnel except these three sections. And unsteady flow analysis of the ultra-high speed vehicle was performed with UDFs in commercial software, Ansys vr. 12.0.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.155-168
• /
• 1997

Lattice girder is a new steel support developed in Europe for the replacement of an existing H-shaped steel set, which is installed after tunnel excavation. Lattice girder has the following several advantages : 1. Lattice girder minimizes the amount of shotcrete shadow which happens to occur behind a steel support. 2. A triangular shape of lattice girder makes shotcrete placed efficiently. 3. Lattice girder provides a good bond strength for shotcrete, which makes the composite structure of lattice girder and shotcrete behave monolithic, and therefore, the rock load can be supported effectively by the lattice girder system, This paper presents the results from a model wall test, a strength test for shotcrete shot on the model wall and a strength test for the bond between lattice girder and shotcrete. These tests proved that lattice-girder system is superior to H-shaped steel-set system concerning the shotcrete rebound rate, the developed shotcrete strength and the adhesion characteristics.