• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.34-38
• /
• 2004

A fiber laser of which wavelength was scanned by an intra-cavity FP (Fabry-Perot) filter was used to interrogate a fiber Bragg grating strain sensor array. We calculated the wavelength variation of the fiber laser using quadrature signal processing with an unbalanced M/Z (Mach-Zehnder) interferometer and time-delayed sampling technique. The calculated wavelengths are mapped to corresponding temporal reflection peaks from the sensor array, which enables more accurate and stable interrogation without the problems caused by the FP filter's nonlinear characteristics. Wavelength resolution of ∼20 pm was obtained in our experimental setup, which could have been greatly enhanced with faster phase modulation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.222-222
• /
• 2010

III-V반도체 태양전지는 다양한 에너지 밴드갭을 만들 수 있으며 다중접합 태양전지의 경우 흡수 전류가 커져 효율이 증가한다. 태양전지의 효율의 증가는 태양광 발전시스템의 발전 단가를 낮추는 중요한 요인이다. 우리는 효율이 높은 III-V 태양전지를 제작하기 위해 일차적으로 Ge기판 위에 GaAs를 성장하고자 한다. Ge기판과 GaAs의 격자상수는 0.07%차이로 거의 일치하나 물질의 열팽창계수가 다르고 비극성인 Ge기판 위에 극성인 GaAs를 성장 시 위상불일치(Anti Phase Domain) 나타난다. 위상불일치 현상을 줄이기 위해 성장 시 온도와 V/III비율, 성장두께 등을 달리하여 성장한다. 표면의 상태가 좋아질수록 위상불일치 현상이 작으며 단일성장 보다 두 단계 과정으로 성장 했을 때 표면의 상태가 더 좋은 결과를 바탕으로[1], 20nm 이하로 얇게 seed층을 성장하고 그 위에 두꺼운 버퍼층을 성장하는 두 단계로 진행하였다. seed층의 성장온도는 $400{\sim}550^{\circ}C$, V/III 비율을 3.5~30으로 다양하게 바꿔가면서 표면의 상태를 비교하였다. 이때 버퍼층의 성장 온도와 V/III 비율은 $680^{\circ}C$, 192으로 일정하게 유지하였다. 표면은 SEM과 AFM을 통해 분석하였으며 결정질의 상태는 XRD 장비(Panalytical사)로 분석하고 광학적 특성은 LTPL(Accent Optical Technologies사)로 측정하였다. 실험의 결과는 seed층의 온도가 낮고 V/III 비율이 낮으며 성장률이 높았을 때 표면상태가 좋은 반면 버퍼층은 온도가 높고 V/III 비율이 높으며 성장률이 낮을 때 표면상태가 좋았다. seed층을 $450^{\circ}C$온도에서 V/III 비율이 3.5이고 성장률이 버퍼층에 비교하여 크게 하여 성장 했을 때 표면 거칠기가 3.75nm로 작아 표면의 상태가 좋음을 확인할 수 있었다. 두 단계 성장 시 표면의 상태는 seed층의 조건에 따라 결정됨을 알 수 있었다. 표면상태가 좋았을 때 결정상태 역시 좋았으며 성장률이 바뀜에 따라 반치폭이 42~45 arcsec의 값을 나타내었다. 광학적 특성은 10K에서 1.1512eV 밴드갭 에너지를 가지고 있어 양질의 GaAs가 성장됨을 알 수 있다.

• Journal of the Korean Magnetics Society
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2013

Spin-orbit coupling (SOC) effect is known to be the physical origin for various exotic magnetic phenomena in the low-dimensional systems. Recently, SOC also draws lots of attention in the study on magnetically doped thermoelectric alloys to determine their properties as the thermoelectric application as well as the topological insulator via the exact electronic structures determination near the Fermi level. In this research, aiming to investigate the spin-orbit coupling effect on the structural properties such as the lattice constants and the bulk modulus of the most widely investigated thermoelectric host material, $Bi_2Te_3$, we carried out the first-principles electronic structure calculation using the all-electron FLAPW (full-potential linearized augmented plane-wave) method. Employing both the local density approximation (LDA) and the generalized gradient approximation (GGA), the structural optimization is achieved by varying the in-plane lattice constant fixing the perpendicular lattice constant and vice versa, to find that the SOC effect increases the equilibrium lattices slightly in both directions while it markedly reduces the bulk modulus value implying the strong orientational dependence, which are attributed to the material's intrinsic structural anisotropy.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.56-65
• /
• 1999

In this paper, a pixelated binary phase grating to generate $5{\times}5$ spots in designed using simple Genetic Algorithm(sGA) composed of selection, crossover, and mutation operators, and it can be applied for the optical interconnection. So as to adapt that GA is a robust and efficient schema, a chromosome is coded as a binary integer of length $32{\times}32$, the ranking method for decreasing the stochastic sampling error is performed, and a single-point crossover having $16{\times}16$ block size is used. A designed grating when the probabillty of mutation is 0.001, the probability of crossover is 0.75 and the population size is 300 has a 74.7[%] high diffraction efficiency and a $1.73{\times}10^{-1}$ uniformity quantitatively.

• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.75-84
• /
• 2012

The sea layer in marine Controlled-Source Electromagnetic (mCSEM) survey changes the conventional definition of apparent resistivity which is used in the land CSEM survey. Thus, the development of a new algorithm, which computes apparent resistivity for mCSEM survey, can be an initiative of mCSEM data interpretation. First, we compared and analyzed electromagnetic responses of the 1D stratified gas hydrate model and the half-space model below the sea layer. Amplitude and phase components showed proper results for computing apparent resistivity than real and imaginary components. Next, the amplitude component is more sensitive to the subsurface resistivity than the phase component in far offset range and vice versa. We suggested the induction number as a selection criteria of amplitude or phase component to calculate apparent resistivity. Based on our study, we have developed a numerical algorithm, which computes appropriate apparent resistivity corresponding to measured mCSEM data using grid search method. In addition, we verified the validity of the developed algorithm by applying it to the stratified gas hydrate models with various model parameters. Finally, by constructing apparent resistivity pseudo-section from the mCSEM responses with 2D numerical models simulating gas hydrate deposits in the Ulleung Basin, we confirmed that the apparent resistivity can provide the information on the geometric distribution of the gas hydrate deposit.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.313-325
• /
• 2011

Finite element grid system using h-refinement on the Yellow Sea was constructed based on previous study (Suh, 1999b) from 14 K to 210 K and special attention was concentrated on refining the coastal zone. In grid generation, depth change between adjacent points and non-dimensional tidal wave length ratio were considered. As a result approximately a quarter of the total nodes are located nearby 5 m of shallow area. Accurate bathymetry data using 30's and ETOPO1 with open boundary conditions of 8 major tidal constituents extracted automatically from FES2004 have been applied. In tidal simulation a 3-dimensional nonlinear harmonic model was setup and tidal amplification due to changes in vertical turbulent and bottom friction were simulated. In this study not only 8 major tidal constituents but also nonlinear shallow tides $M_4,$, $MS_4$ and long period $M_f,$, $M_{sf}$ were reproduced. It is found that implication of spatial variation of friction coefficient plays a very important role in reproduction of astronomical and shallow tides which are computed by iterative computation of nonlinear terms. Also it should be considered differently with respect to tidal periods. To understand the distribution of tidal asymmetry, amplitude ratio of $M_4/M_2$ and phase differences $2g(M_2)-g(M_4)$ were calculated. Tidal distortion ratio marks up to 0.2 on the west coast showing shallow coastal characteristics and somewhat wide range of ebb-dominances in front of Mokpo area are reproduced.